[Mon Jun 3 00:39:32 2013] Detection parameters: Position = (492.9, 348.8) = 2 19 38.29 -3 25 10.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 135.5 +/- 13.6 Background counts = 11.5 Rate = 0.01 +/- 0.001 [Mon Jun 3 00:39:34 2013] Off-axis axis estimate = 14.56' [Mon Jun 3 00:40:11 2013] Using EEF radius (= 13.71 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 00:40:11 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon Jun 3 00:40:11 2013] Initial guess for spatial extent in simple fitting = 13.71" [Mon Jun 3 00:40:11 2013] source mask rpix=3.2, npix_max = 53, mask sum = 34, frac = 0.637 [Mon Jun 3 00:40:11 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 13.71" [Mon Jun 3 00:40:12 2013] fullrun_pn_xmm0037982601_pi300-10000_cl_pass0_src5.ximg exists [Mon Jun 3 00:40:12 2013] fullrun_pn_xmm0037982601_pi300-10000_cl_pass0_src5_1.ximg exists [Mon Jun 3 00:40:12 2013] Fit fullrun_pn_xmm0037982601_pi300-10000_cl_pass0_src5 appears to have run properly [Mon Jun 3 00:40:12 2013] fullrun_pn_xmm0037982601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Mon Jun 3 00:40:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982601_pi300-10000_cl_pass0_tfrozen_src5.csv [Mon Jun 3 00:40:12 2013] fullrun_pn_xmm0037982601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Mon Jun 3 00:40:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982601_pi300-10000_cl_pass0_tfrozen_src5.csv [Mon Jun 3 00:40:12 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0037982601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0037982601_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:40:24 2013] Source 5 is offset by 1.484248 and -8.393692 pixels which is larger than 2 X fitted extent = 0.957163 x 0.957163, not incorporating fit results [Mon Jun 3 00:40:24 2013] Vigneting correction estimate = 1.000000 [Mon Jun 3 00:40:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 3 00:40:24 2013] Assessing source extent using major [Mon Jun 3 00:40:24 2013] Source does appear to be extended [Mon Jun 3 00:40:24 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 3 00:40:46 2013] Using EEF radius (= 13.71 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 00:40:46 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon Jun 3 00:40:46 2013] Initial guess for spatial extent in simple fitting = 13.71" [Mon Jun 3 00:40:46 2013] source mask rpix=3.2, npix_max = 53, mask sum = 34, frac = 0.637 [Mon Jun 3 00:40:46 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 13.71" [Mon Jun 3 00:40:47 2013] fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_src5.ximg exists [Mon Jun 3 00:40:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_src5.csv [Mon Jun 3 00:40:47 2013] fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_src5_1.ximg exists [Mon Jun 3 00:40:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_src5.csv [Mon Jun 3 00:40:47 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:40:47 2013] fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Mon Jun 3 00:40:47 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_tfrozen_src5.csv [Mon Jun 3 00:40:47 2013] fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Mon Jun 3 00:40:47 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_tfrozen_src5.csv [Mon Jun 3 00:40:47 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0037982601_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 00:40:59 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.002674 pixels away [Mon Jun 3 00:40:59 2013] Vigneting correction estimate = 1.000000 [Mon Jun 3 00:40:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 3 00:40:59 2013] Assessing source extent using major [Mon Jun 3 00:40:59 2013] Source does appear to be extended [Mon Jun 3 00:40:59 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 3 00:41:21 2013] XMMSAS src. selection expression = ellipse(42832.976410, 30293.936798, 652.500000, 652.500000, 0.000000, X, Y) [Mon Jun 3 00:41:21 2013] Not overwriting source region fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src5_src.reg [Mon Jun 3 00:41:21 2013] Extracting stamp from image fullrun_pn_xmm0037982601_pi300-10000_cl_sm2.00.img.gz, (455, 311) - (530, 386) [Mon Jun 3 00:41:21 2013] XMMSAS bgd. selection expression = annulus(42832.976410, 30293.936798, 1087.500000, 2175.000000, X, Y) [Mon Jun 3 00:41:21 2013] Writing fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src5.gif [Mon Jun 3 00:41:22 2013] ../../xmm0037982601/products/events/fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0037982601/products/events/fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create [Mon Jun 3 00:41:22 2013] Mean detx,y = (-16355.84, 9628.03) [Mon Jun 3 00:41:22 2013] ../../xmm0037982601/products/images/fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src5_src.img and ../../xmm0037982601/products/images/fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create [Mon Jun 3 00:41:22 2013] ../../xmm0037982601/products/spectra/fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0037982601/products/spectra/fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create [Mon Jun 3 00:41:22 2013] Setting source spectrum file to fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src5_src_b10.pi.gz [Mon Jun 3 00:41:22 2013] Setting bgd. spectrum file to fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src5_bgd.pi.gz [Mon Jun 3 00:41:22 2013] ../../xmm0037982601/products/lightcurves/fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0037982601/products/lightcurves/fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create [Mon Jun 3 00:41:33 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon Jun 3 00:41:33 2013] rmf not generated due to insufficient counts [Mon Jun 3 00:41:33 2013] fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src5.arf exists, delete to re-create [Mon Jun 3 01:07:03 2013] Updating aperture counts using extracted products [Mon Jun 3 01:07:03 2013] Total counts from fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 175.00 [Mon Jun 3 01:07:03 2013] Total counts from fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src5_bgd.pi.gz = 316.00 [Mon Jun 3 01:07:03 2013] Got source and background scale factors 686918.000000, 5367652.000000 [Mon Jun 3 01:07:03 2013] User source parameters: Position = (492.9, 348.8) = 2 19 38.29 -3 25 10.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 134.6 +/- 14.3 Background aperture counts = 40.4 Rate = 0.01 +/- 0.001 [Mon Jun 3 01:07:03 2013] Updating counts from extracted products [Mon Jun 3 01:07:03 2013] Set source signif. to 134.56/6.36 = 21.16 [Mon Jun 3 01:07:10 2013] Calculating source flux in energy range 0.30-8.00 [Mon Jun 3 01:07:10 2013] Using photon index=1.80, rate=0.012, arf fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src5.arf [Mon Jun 3 01:07:10 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jun 3 01:07:10 2013] Getting flux using calc_pl_flux failed [Mon Jun 3 01:07:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon Jun 3 01:07:38 2013] xmm0037982601/analysis//spectral/fullrun_pn_xmm0037982601_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete