[Mon Jun  3 00:39:37 2013] Detection parameters:
  Position = (189.2, 328.0) = 2 21 6.53 -3 26 40.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22.7 +/- 6.6
  Background counts = 5.6
  Rate = 0.002 +/- 0.0006

[Mon Jun  3 00:39:40 2013] Off-axis axis estimate = 8.21'
[Mon Jun  3 00:40:13 2013] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 00:40:13 2013] Initial guess for spatial extent in simple fitting = 10.53"
[Mon Jun  3 00:40:13 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.055
[Mon Jun  3 00:40:13 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 10.53"
[Mon Jun  3 00:40:13 2013] fullrun_mos1_xmm0037982601_pi300-10000_cl_pass0_src12.ximg exists
[Mon Jun  3 00:40:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037982601_pi300-10000_cl_pass0_src12.csv
[Mon Jun  3 00:40:13 2013] fullrun_mos1_xmm0037982601_pi300-10000_cl_pass0_src12_1.ximg exists
[Mon Jun  3 00:40:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037982601_pi300-10000_cl_pass0_src12.csv
[Mon Jun  3 00:40:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037982601_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037982601_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 00:40:14 2013] fullrun_mos1_xmm0037982601_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Mon Jun  3 00:40:14 2013] fullrun_mos1_xmm0037982601_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Mon Jun  3 00:40:14 2013] Fit fullrun_mos1_xmm0037982601_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Mon Jun  3 00:40:28 2013] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.387904 pixels away
[Mon Jun  3 00:40:28 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 00:40:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 00:40:28 2013] Assessing source extent using major
[Mon Jun  3 00:40:28 2013] Source does appear to be extended
[Mon Jun  3 00:40:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 00:40:48 2013] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 00:40:48 2013] Initial guess for spatial extent in simple fitting = 10.53"
[Mon Jun  3 00:40:48 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.055
[Mon Jun  3 00:40:48 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 10.53"
[Mon Jun  3 00:40:48 2013] fullrun_mos1_xmm0037982601_pi300-10000_cl_pass1_src12.ximg exists
[Mon Jun  3 00:40:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037982601_pi300-10000_cl_pass1_src12.csv
[Mon Jun  3 00:40:48 2013] fullrun_mos1_xmm0037982601_pi300-10000_cl_pass1_src12_1.ximg exists
[Mon Jun  3 00:40:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037982601_pi300-10000_cl_pass1_src12.csv
[Mon Jun  3 00:40:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037982601_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037982601_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 00:40:49 2013] fullrun_mos1_xmm0037982601_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Mon Jun  3 00:40:49 2013] fullrun_mos1_xmm0037982601_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Mon Jun  3 00:40:49 2013] Fit fullrun_mos1_xmm0037982601_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Mon Jun  3 00:41:03 2013] Spatial fit model total counts = 67.219100, observed total counts = 66.000000
[Mon Jun  3 00:41:03 2013] Offset between fit and detection position for source 4 = 0.335536 pixels
[Mon Jun  3 00:41:03 2013] 67.712300 total counts/ 50.800100 bgd. counts: snr = 2.372837
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.335536 pixels
  Position = (188.9, 327.9) = 2 21 6.61 -3 26 42.6
  Extent = 5.3 (2.6-10.1)", rotation angle = 0
  Source counts = 16.9 +/- 8.2
  Background counts = 50.8
  Rate = 0.001 +/- 0.0006
[Mon Jun  3 00:41:03 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 00:41:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 00:41:03 2013] Assessing source extent using major axis lower bound
[Mon Jun  3 00:41:03 2013] Source does appear to be extended
[Mon Jun  3 00:41:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 00:41:33 2013] XMMSAS src. selection expression = ellipse(16382.550440, 28474.501200, 319.746609, 319.746609, 0.000000, X, Y)
[Mon Jun  3 00:41:33 2013] Not overwriting source region fullrun_mos1_xmm0037982601_pi300-10000_pass1_cl_src4_src.reg
[Mon Jun  3 00:41:33 2013] Extracting stamp from image fullrun_mos1_xmm0037982601_pi300-10000_cl_sm2.00.img.gz, (170, 309) - (207, 346)
[Mon Jun  3 00:41:33 2013] XMMSAS bgd. selection expression = annulus(16382.550440, 28474.501200, 532.911015, 1065.822031, X, Y) && !ellipse(17664.827972, 30323.901459, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun  3 00:41:33 2013] Writing fullrun_mos1_xmm0037982601_pi300-10000_pass1_cl_src4.gif
[Mon Jun  3 00:43:05 2013] Mean detx,y = (-1601.48, 8518.64) 
[Mon Jun  3 00:43:07 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  3 00:43:18 2013] Binned source spectrum to 10 counts/bin
[Mon Jun  3 00:43:19 2013] Setting source spectrum file to fullrun_mos1_xmm0037982601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Jun  3 00:43:19 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0037982601_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Jun  3 00:53:39 2013] Not generating rmf since there are only 16 counts
[Mon Jun  3 00:53:39 2013] rmf not generated due to insufficient counts
[Mon Jun  3 01:07:15 2013] Updating aperture counts using extracted products
[Mon Jun  3 01:07:15 2013] Total counts from fullrun_mos1_xmm0037982601_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 25.00
[Mon Jun  3 01:07:15 2013] Total counts from fullrun_mos1_xmm0037982601_pi300-10000_pass1_cl_src4_bgd.pi.gz = 49.00
[Mon Jun  3 01:07:15 2013] Got source and background scale factors 332800.000000, 2466368.000000
[Mon Jun  3 01:07:15 2013] User source parameters:
  Position = (188.9, 327.9) = 2 21 6.61 -3 26 42.6
  Extent = 5.3 (2.6-10.1)", rotation angle = 0
  Source aperture counts = 18.4 +/- 6.1
  Background aperture counts = 6.6
  Rate = 0.001 +/- 0.0004

[Mon Jun  3 01:07:16 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 01:07:16 2013] Using photon index=1.80, rate=0.00113, arf fullrun_mos1_xmm0037982601_pi300-10000_pass1_cl_src4.arf
[Mon Jun  3 01:07:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  3 01:07:16 2013] Updating source flux to 1.8e-14
[Mon Jun  3 01:07:24 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun  3 01:07:28 2013] xmm0037982601/analysis//spectral/fullrun_mos1_xmm0037982601_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete