[Thu May 30 01:42:01 2013] Detection parameters: Position = (231.2, 251.2) = 2 21 34.49 -4 32 10.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 189.3 +/- 17.1 Background counts = 11.9 Rate = 0.02 +/- 0.002 [Thu May 30 01:42:03 2013] Off-axis axis estimate = 5.96' [Thu May 30 01:44:59 2013] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting [Thu May 30 01:44:59 2013] Initial guess for spatial extent in simple fitting = 9.41" [Thu May 30 01:44:59 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.882 [Thu May 30 01:44:59 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 9.41" [Thu May 30 02:52:26 2013] fullrun_pn_xmm0037982101_pi300-10000_cl_pass0_src8.ximg exists [Thu May 30 02:52:26 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0037982101_pi300-10000_cl_pass0_src8.csv [Thu May 30 02:52:26 2013] fullrun_pn_xmm0037982101_pi300-10000_cl_pass0_src8_1.ximg exists [Thu May 30 02:52:26 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0037982101_pi300-10000_cl_pass0_src8.csv [Thu May 30 02:52:26 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0037982101_pi300-10000_cl_pass0_src8_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0037982101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 30 02:52:27 2013] fullrun_pn_xmm0037982101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists [Thu May 30 02:52:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982101_pi300-10000_cl_pass0_tfrozen_src8.csv [Thu May 30 02:52:27 2013] fullrun_pn_xmm0037982101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists [Thu May 30 02:52:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982101_pi300-10000_cl_pass0_tfrozen_src8.csv [Thu May 30 02:52:27 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0037982101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0037982101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 30 04:20:32 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.676844 pixels away [Thu May 30 04:20:32 2013] Vigneting correction estimate = 1.000000 [Thu May 30 04:20:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 30 04:20:32 2013] Assessing source extent using major [Thu May 30 04:20:32 2013] Source does appear to be extended [Thu May 30 04:20:32 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 30 04:21:00 2013] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting [Thu May 30 04:21:00 2013] Initial guess for spatial extent in simple fitting = 9.41" [Thu May 30 04:21:00 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.882 [Thu May 30 04:21:00 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 9.41" [Thu May 30 05:33:37 2013] fullrun_pn_xmm0037982101_pi300-10000_cl_pass1_src8.ximg exists [Thu May 30 05:33:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982101_pi300-10000_cl_pass1_src8.csv [Thu May 30 05:33:37 2013] fullrun_pn_xmm0037982101_pi300-10000_cl_pass1_src8_1.ximg exists [Thu May 30 05:33:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982101_pi300-10000_cl_pass1_src8.csv [Thu May 30 05:33:37 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0037982101_pi300-10000_cl_pass1_src8_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0037982101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 30 05:33:37 2013] fullrun_pn_xmm0037982101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists [Thu May 30 05:33:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982101_pi300-10000_cl_pass1_tfrozen_src8.csv [Thu May 30 05:33:37 2013] fullrun_pn_xmm0037982101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists [Thu May 30 05:33:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037982101_pi300-10000_cl_pass1_tfrozen_src8.csv [Thu May 30 05:33:37 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0037982101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0037982101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 30 07:01:33 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 10.325684 pixels away [Thu May 30 07:01:33 2013] Vigneting correction estimate = 1.000000 [Thu May 30 07:01:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 30 07:01:33 2013] Assessing source extent using major [Thu May 30 07:01:33 2013] Source does appear to be extended [Thu May 30 07:01:33 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 30 07:02:02 2013] XMMSAS src. selection expression = ellipse(20063.048233, 21808.581314, 652.500000, 652.500000, 0.000000, X, Y) [Thu May 30 07:02:02 2013] Writing source region out to fullrun_pn_xmm0037982101_pi300-10000_pass1_cl_src10_src.reg [Thu May 30 07:02:02 2013] Extracting stamp from image fullrun_pn_xmm0037982101_pi300-10000_cl_sm2.00.img.gz, (194, 214) - (269, 289) [Thu May 30 07:02:02 2013] XMMSAS bgd. selection expression = annulus(20063.048233, 21808.581314, 1087.500000, 2175.000000, X, Y) && !ellipse(20165.647200, 23921.278400, 394.970411, 314.325609, 99.836730, X, Y) && !ellipse(17292.399048, 24172.203888, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 30 07:02:02 2013] Writing fullrun_pn_xmm0037982101_pi300-10000_pass1_cl_src10.gif [Thu May 30 07:12:20 2013] Mean detx,y = (3727.67, -3834.59) [Thu May 30 07:12:25 2013] Setting backscal keywords in source and bgd. spectrum [Thu May 30 07:12:48 2013] Binned source spectrum to 10 counts/bin [Thu May 30 07:12:48 2013] Setting source spectrum file to fullrun_pn_xmm0037982101_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Thu May 30 07:12:48 2013] Setting bgd. spectrum file to fullrun_pn_xmm0037982101_pi300-10000_pass1_cl_src10_bgd.pi.gz [Thu May 30 07:42:30 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu May 30 07:42:30 2013] rmf not generated due to insufficient counts [Thu May 30 08:22:04 2013] Updating aperture counts using extracted products [Thu May 30 08:22:05 2013] Total counts from fullrun_pn_xmm0037982101_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 227.00 [Thu May 30 08:22:05 2013] Total counts from fullrun_pn_xmm0037982101_pi300-10000_pass1_cl_src10_bgd.pi.gz = 611.00 [Thu May 30 08:22:05 2013] Got source and background scale factors 1172360.000000, 10103126.000000 [Thu May 30 08:22:05 2013] User source parameters: Position = (231.2, 251.2) = 2 21 34.49 -4 32 10.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 156.1 +/- 16.1 Background aperture counts = 70.9 Rate = 0.01 +/- 0.001 [Thu May 30 08:22:05 2013] Updating counts from extracted products [Thu May 30 08:22:05 2013] Set source signif. to 156.10/8.42 = 18.54 [Thu May 30 08:22:15 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 30 08:22:15 2013] Using photon index=1.80, rate=0.0124, arf fullrun_pn_xmm0037982101_pi300-10000_pass1_cl_src10.arf [Thu May 30 08:22:15 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 30 08:22:15 2013] Updating source flux to 4.3e-14 [Thu May 30 08:22:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu May 30 08:22:47 2013] xmm0037982101/analysis//spectral/fullrun_pn_xmm0037982101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete