[Thu May 30 01:43:17 2013] Detection parameters:
  Position = (286.6, 384.2) = 2 21 18.38 -4 22 37.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.3 +/- 14.3
  Background counts = 3.8
  Rate = 0.01 +/- 0.001

[Thu May 30 01:43:17 2013] Off-axis axis estimate = 6.27'
[Thu May 30 03:32:23 2013] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Thu May 30 03:32:23 2013] Initial guess for spatial extent in simple fitting = 9.57"
[Thu May 30 03:32:23 2013] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.755
[Thu May 30 03:32:23 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 9.57"
[Thu May 30 04:20:20 2013] fullrun_mos2_xmm0037982101_pi300-10000_cl_pass0_src4.ximg exists
[Thu May 30 04:20:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037982101_pi300-10000_cl_pass0_src4.csv
[Thu May 30 04:20:20 2013] fullrun_mos2_xmm0037982101_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu May 30 04:20:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037982101_pi300-10000_cl_pass0_src4.csv
[Thu May 30 04:20:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037982101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037982101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 04:20:21 2013] fullrun_mos2_xmm0037982101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu May 30 04:20:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037982101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu May 30 04:20:21 2013] fullrun_mos2_xmm0037982101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu May 30 04:20:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037982101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu May 30 04:20:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037982101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037982101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 04:20:43 2013] Spatial fit model total counts = 133.776000, observed total counts = 154.000000
[Thu May 30 04:20:43 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 30 04:20:43 2013] Vigneting correction estimate = 1.000000
[Thu May 30 04:20:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 04:20:43 2013] Assessing source extent using major
[Thu May 30 04:20:43 2013] Source does appear to be extended
[Thu May 30 04:20:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 06:17:41 2013] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Thu May 30 06:17:41 2013] Initial guess for spatial extent in simple fitting = 9.57"
[Thu May 30 06:17:41 2013] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.755
[Thu May 30 06:17:41 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 9.57"
[Thu May 30 07:01:23 2013] fullrun_mos2_xmm0037982101_pi300-10000_cl_pass1_src4.ximg exists
[Thu May 30 07:01:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037982101_pi300-10000_cl_pass1_src4.csv
[Thu May 30 07:01:23 2013] fullrun_mos2_xmm0037982101_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu May 30 07:01:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037982101_pi300-10000_cl_pass1_src4.csv
[Thu May 30 07:01:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037982101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037982101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 07:01:23 2013] fullrun_mos2_xmm0037982101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu May 30 07:01:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037982101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu May 30 07:01:23 2013] fullrun_mos2_xmm0037982101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu May 30 07:01:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037982101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu May 30 07:01:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037982101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037982101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 07:01:45 2013] Spatial fit model total counts = 134.211000, observed total counts = 154.000000
[Thu May 30 07:01:45 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 30 07:01:45 2013] Vigneting correction estimate = 1.000000
[Thu May 30 07:01:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 07:01:45 2013] Assessing source extent using major
[Thu May 30 07:01:45 2013] Source does appear to be extended
[Thu May 30 07:01:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 08:04:17 2013] XMMSAS src. selection expression = ellipse(24881.635681, 33373.855743, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 08:04:17 2013] Writing source region out to fullrun_mos2_xmm0037982101_pi300-10000_pass1_cl_src10_src.reg
[Thu May 30 08:04:17 2013] Extracting stamp from image fullrun_mos2_xmm0037982101_pi300-10000_cl_sm2.00.img.gz, (249, 347) - (324, 422)
[Thu May 30 08:04:17 2013] XMMSAS bgd. selection expression = annulus(24881.635681, 33373.855743, 1087.500000, 2175.000000, X, Y)
[Thu May 30 08:04:17 2013] Writing fullrun_mos2_xmm0037982101_pi300-10000_pass1_cl_src10.gif
[Thu May 30 08:05:26 2013] Mean detx,y = (-1586.66, -8538.47) 
[Thu May 30 08:05:28 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 08:06:17 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 08:06:18 2013] Setting source spectrum file to fullrun_mos2_xmm0037982101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu May 30 08:06:18 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0037982101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu May 30 08:19:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 30 08:19:31 2013] rmf not generated due to insufficient counts
[Thu May 30 08:22:23 2013] Updating aperture counts using extracted products
[Thu May 30 08:22:23 2013] Total counts from fullrun_mos2_xmm0037982101_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 133.00
[Thu May 30 08:22:23 2013] Total counts from fullrun_mos2_xmm0037982101_pi300-10000_pass1_cl_src10_bgd.pi.gz = 246.00
[Thu May 30 08:22:23 2013] Got source and background scale factors 1253868.000000, 9805254.000000
[Thu May 30 08:22:23 2013] User source parameters:
  Position = (286.6, 384.2) = 2 21 18.38 -4 22 37.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 101.5 +/- 12.6
  Background aperture counts = 31.5
  Rate = 0.006 +/- 0.0008

[Thu May 30 08:22:23 2013] Updating counts from extracted products
[Thu May 30 08:22:23 2013] Set source signif. to 101.54/5.61 = 18.10
[Thu May 30 08:22:29 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 08:22:29 2013] Using photon index=1.80, rate=0.00632, arf fullrun_mos2_xmm0037982101_pi300-10000_pass1_cl_src10.arf
[Thu May 30 08:22:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 08:22:29 2013] Updating source flux to 9.3e-14
[Thu May 30 08:22:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 08:22:38 2013] xmm0037982101/analysis//spectral/fullrun_mos2_xmm0037982101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete