[Thu May 30 01:42:39 2013] Detection parameters: Position = (164.2, 437.6) = 2 21 53.96 -4 18 38.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 26.3 +/- 6.9 Background counts = 4.2 Rate = 0.002 +/- 0.0004 [Thu May 30 01:42:40 2013] Off-axis axis estimate = 14.02' [Thu May 30 02:52:27 2013] Using EEF radius (= 13.44 ")to estimate initial spatial extent for simple fitting [Thu May 30 02:52:27 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu May 30 02:52:27 2013] Initial guess for spatial extent in simple fitting = 13.44" [Thu May 30 02:52:27 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.951 [Thu May 30 02:52:27 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 13.44" [Thu May 30 03:32:23 2013] fullrun_mos1_xmm0037982101_pi300-10000_cl_pass0_src16.ximg exists [Thu May 30 03:32:23 2013] fullrun_mos1_xmm0037982101_pi300-10000_cl_pass0_src16_1.ximg exists [Thu May 30 03:32:23 2013] Fit fullrun_mos1_xmm0037982101_pi300-10000_cl_pass0_src16 appears to have run properly [Thu May 30 03:32:23 2013] fullrun_mos1_xmm0037982101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists [Thu May 30 03:32:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037982101_pi300-10000_cl_pass0_tfrozen_src16.csv [Thu May 30 03:32:23 2013] fullrun_mos1_xmm0037982101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists [Thu May 30 03:32:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037982101_pi300-10000_cl_pass0_tfrozen_src16.csv [Thu May 30 03:32:23 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0037982101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0037982101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 30 04:20:37 2013] Spatial fit model total counts = 65.965800, observed total counts = 60.000000 [Thu May 30 04:20:37 2013] Offset between fit and detection position for source 2 = 0.134157 pixels [Thu May 30 04:20:37 2013] 63.676000 total counts/ 45.080900 bgd. counts: snr = 2.769505 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.134157 pixels Position = (164.1, 437.7) = 2 21 53.99 -4 18 39.8 Extent = 8.5 (5.8-13.6)", rotation angle = 323 (305-343) degrees Source counts = 18.6 +/- 8.0 Background counts = 45.1 Rate = 0.001 +/- 0.0005 [Thu May 30 04:20:37 2013] Vigneting correction estimate = 1.000000 [Thu May 30 04:20:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 30 04:20:37 2013] Assessing source extent using major axis lower bound [Thu May 30 04:20:37 2013] Source does appear to be extended [Thu May 30 04:20:37 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.17 [Thu May 30 05:33:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Thu May 30 05:33:37 2013] Initial guess for spatial extent in simple fitting = 5.95" [Thu May 30 05:33:37 2013] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.146 [Thu May 30 05:33:37 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 5.95" [Thu May 30 06:17:40 2013] fullrun_mos1_xmm0037982101_pi300-10000_cl_pass1_src16.ximg exists [Thu May 30 06:17:40 2013] fullrun_mos1_xmm0037982101_pi300-10000_cl_pass1_src16_1.ximg exists [Thu May 30 06:17:40 2013] Fit fullrun_mos1_xmm0037982101_pi300-10000_cl_pass1_src16 appears to have run properly [Thu May 30 06:17:40 2013] fullrun_mos1_xmm0037982101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists [Thu May 30 06:17:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037982101_pi300-10000_cl_pass1_tfrozen_src16.csv [Thu May 30 06:17:40 2013] fullrun_mos1_xmm0037982101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists [Thu May 30 06:17:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037982101_pi300-10000_cl_pass1_tfrozen_src16.csv [Thu May 30 06:17:40 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0037982101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0037982101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 30 07:01:39 2013] Spatial fit model total counts = 49.314300, observed total counts = 49.000000 [Thu May 30 07:01:39 2013] Offset between fit and detection position for source 2 = 0.072752 pixels [Thu May 30 07:01:39 2013] 48.047400 total counts/ 29.526000 bgd. counts: snr = 3.408564 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.072752 pixels Position = (164.0, 437.7) = 2 21 54.01 -4 18 39.9 Extent = 8.4 (5.8-11.9)" x 2.8 (2.0-4.2)", rotation angle = 324 (307-342) degrees Source counts = 18.5 +/- 6.9 Background counts = 29.5 Rate = 0.001 +/- 0.0004 [Thu May 30 07:01:39 2013] Vigneting correction estimate = 1.000000 [Thu May 30 07:01:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 30 07:01:39 2013] Assessing source extent using major axis lower bound [Thu May 30 07:01:39 2013] Source does appear to be extended [Thu May 30 07:01:39 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.38 [Thu May 30 07:50:43 2013] XMMSAS src. selection expression = ellipse(14220.792760, 38030.417800, 504.345015, 168.324605, 323.988083, X, Y) [Thu May 30 07:50:43 2013] Writing source region out to fullrun_mos1_xmm0037982101_pi300-10000_pass1_cl_src2_src.reg [Thu May 30 07:50:43 2013] Extracting stamp from image fullrun_mos1_xmm0037982101_pi300-10000_cl_sm2.00.img.gz, (135, 409) - (193, 467) [Thu May 30 07:50:43 2013] XMMSAS bgd. selection expression = annulus(14220.792760, 38030.417800, 840.575024, 1681.150048, X, Y) [Thu May 30 07:50:43 2013] Writing fullrun_mos1_xmm0037982101_pi300-10000_pass1_cl_src2.gif [Thu May 30 07:57:20 2013] Mean detx,y = (-10427.53, 12800.27) [Thu May 30 07:57:22 2013] Setting backscal keywords in source and bgd. spectrum [Thu May 30 07:57:37 2013] Binned source spectrum to 10 counts/bin [Thu May 30 07:57:37 2013] Setting source spectrum file to fullrun_mos1_xmm0037982101_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Thu May 30 07:57:37 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0037982101_pi300-10000_pass1_cl_src2_bgd.pi.gz [Thu May 30 08:04:01 2013] Not generating rmf since there are only 18 counts [Thu May 30 08:04:01 2013] rmf not generated due to insufficient counts [Thu May 30 08:22:20 2013] Updating aperture counts using extracted products [Thu May 30 08:22:21 2013] Total counts from fullrun_mos1_xmm0037982101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 15.00 [Thu May 30 08:22:21 2013] Total counts from fullrun_mos1_xmm0037982101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 89.00 [Thu May 30 08:22:21 2013] Got source and background scale factors 238321.000000, 3710557.000000 [Thu May 30 08:22:21 2013] User source parameters: Position = (164.0, 437.7) = 2 21 54.01 -4 18 39.9 Extent = 8.4 (5.8-11.9)" x 2.8 (2.0-4.2)", rotation angle = 324 (307-342) degrees Source aperture counts = 9.3 +/- 5.0 Background aperture counts = 5.7 Rate = 0.0006 +/- 0.0003 [Thu May 30 08:22:22 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 30 08:22:22 2013] Using photon index=1.80, rate=0.00115, arf fullrun_mos1_xmm0037982101_pi300-10000_pass1_cl_src2.arf [Thu May 30 08:22:22 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 30 08:22:22 2013] Updating source flux to 4.4e-14 [Thu May 30 08:22:32 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting [Thu May 30 08:22:34 2013] xmm0037982101/analysis//spectral/fullrun_mos1_xmm0037982101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete