[Sun May 26 06:07:17 2013] Detection parameters:
  Position = (253.3, 379.9) = 2 27 28.04 -2 42 54.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1424.8 +/- 44.6
  Background counts = 8.2
  Rate = 0.2 +/- 0.007

[Sun May 26 06:07:18 2013] Off-axis axis estimate = 6.75'
[Sun May 26 06:09:22 2013] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Sun May 26 06:09:22 2013] Initial guess for spatial extent in simple fitting = 9.81"
[Sun May 26 06:09:22 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.989
[Sun May 26 06:09:22 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 9.81"
[Sun May 26 06:56:25 2013] fullrun_pn_xmm0037981901_pi300-10000_cl_pass0_src10.ximg exists
[Sun May 26 06:56:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037981901_pi300-10000_cl_pass0_src10.csv
[Sun May 26 06:56:25 2013] fullrun_pn_xmm0037981901_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun May 26 06:56:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037981901_pi300-10000_cl_pass0_src10.csv
[Sun May 26 06:56:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037981901_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037981901_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 06:56:26 2013] fullrun_pn_xmm0037981901_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun May 26 06:56:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037981901_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun May 26 06:56:26 2013] fullrun_pn_xmm0037981901_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun May 26 06:56:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037981901_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun May 26 06:56:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037981901_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037981901_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 08:08:10 2013] Warning, spatial fit 10 centroid is now closest to src. 12
[Sun May 26 08:08:10 2013] Source 11 is offset by -4.288949 and 7.312522 pixels which is larger than
2 X fitted extent = 1.078046 x 1.078046, not incorporating fit results
[Sun May 26 08:08:10 2013] Vigneting correction estimate = 1.000000
[Sun May 26 08:08:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 08:08:10 2013] Assessing source extent using major
[Sun May 26 08:08:10 2013] Source does appear to be extended
[Sun May 26 08:08:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 08:08:34 2013] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Sun May 26 08:08:34 2013] Initial guess for spatial extent in simple fitting = 9.81"
[Sun May 26 08:08:34 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.989
[Sun May 26 08:08:34 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 9.81"
[Sun May 26 08:53:59 2013] fullrun_pn_xmm0037981901_pi300-10000_cl_pass1_src10.ximg exists
[Sun May 26 08:53:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037981901_pi300-10000_cl_pass1_src10.csv
[Sun May 26 08:53:59 2013] fullrun_pn_xmm0037981901_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun May 26 08:53:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037981901_pi300-10000_cl_pass1_src10.csv
[Sun May 26 08:53:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037981901_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037981901_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 08:53:59 2013] fullrun_pn_xmm0037981901_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun May 26 08:53:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037981901_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun May 26 08:53:59 2013] fullrun_pn_xmm0037981901_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun May 26 08:53:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037981901_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun May 26 08:53:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037981901_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037981901_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 10:00:40 2013] Warning, spatial fit 10 centroid is now closest to src. 12
[Sun May 26 10:00:40 2013] Source 11 is offset by -4.288949 and 7.312522 pixels which is larger than
2 X fitted extent = 1.078046 x 1.078046, not incorporating fit results
[Sun May 26 10:00:40 2013] Vigneting correction estimate = 1.000000
[Sun May 26 10:00:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 10:00:40 2013] Assessing source extent using major
[Sun May 26 10:00:40 2013] Source does appear to be extended
[Sun May 26 10:00:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 10:01:05 2013] Counts = 1424.835693, rescaling region sizes by 2.000000
[Sun May 26 10:01:05 2013] XMMSAS src. selection expression = ellipse(21991.681427, 33006.009399, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun May 26 10:01:05 2013] Writing source region out to fullrun_pn_xmm0037981901_pi300-10000_pass1_cl_src11_src.reg
[Sun May 26 10:01:05 2013] Extracting stamp from image fullrun_pn_xmm0037981901_pi300-10000_cl_sm2.00.img.gz, (178, 305) - (328, 455)
[Sun May 26 10:01:05 2013] XMMSAS bgd. selection expression = annulus(21991.681427, 33006.009399, 4350.000000, 8700.000000, X, Y) && !ellipse(15290.212250, 30732.144073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13620.988693, 29048.807709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19238.032394, 26928.562378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23649.962280, 24321.097931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17089.056992, 23542.645996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21589.759109, 31521.643585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16260.750244, 24135.386597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31080.268860, 33738.202759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27137.369812, 30450.033936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24395.261780, 28124.443400, 538.556015, 228.730407, 7.408926, X, Y) && !ellipse(18053.144592, 25559.395630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12626.652344, 25557.006104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24585.541620, 34856.152000, 701.901620, 249.759207, 356.735639, X, Y)
[Sun May 26 10:01:05 2013] Writing fullrun_pn_xmm0037981901_pi300-10000_pass1_cl_src11.gif
[Sun May 26 10:08:51 2013] Mean detx,y = (4392.12, 7423.43) 
[Sun May 26 10:08:56 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 10:12:43 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 10:12:43 2013] Setting source spectrum file to fullrun_pn_xmm0037981901_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun May 26 10:12:43 2013] Setting bgd. spectrum file to fullrun_pn_xmm0037981901_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun May 26 10:40:50 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 10:40:50 2013] rmf not generated due to insufficient counts
[Sun May 26 11:21:18 2013] Updating aperture counts using extracted products
[Sun May 26 11:21:18 2013] Total counts from fullrun_pn_xmm0037981901_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 1708.00
[Sun May 26 11:21:18 2013] Total counts from fullrun_pn_xmm0037981901_pi300-10000_pass1_cl_src11_bgd.pi.gz = 5054.00
[Sun May 26 11:21:18 2013] Got source and background scale factors 4132367.000000, 121951449.000000
[Sun May 26 11:21:18 2013] User source parameters:
  Position = (253.3, 379.9) = 2 27 28.04 -2 42 54.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1536.7 +/- 42.3
  Background aperture counts = 171.3
  Rate = 0.2 +/- 0.004

[Sun May 26 11:21:18 2013] Updating counts from extracted products
[Sun May 26 11:21:18 2013] Set source signif. to 1536.74/13.09 = 117.43
[Sun May 26 11:21:24 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 11:21:24 2013] Using photon index=1.80, rate=0.154, arf fullrun_pn_xmm0037981901_pi300-10000_pass1_cl_src11.arf
[Sun May 26 11:21:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 11:21:24 2013] Updating source flux to 5.5e-13
[Sun May 26 11:21:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 11:21:48 2013] xmm0037981901/analysis//spectral/fullrun_pn_xmm0037981901_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete