[Sun May 26 06:07:49 2013] Detection parameters:
  Position = (196.6, 271.2) = 2 27 44.52 -2 50 47.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.1 +/- 11.7
  Background counts = 4.1
  Rate = 0.01 +/- 0.001

[Sun May 26 06:07:49 2013] Off-axis axis estimate = 7.64'
[Sun May 26 06:56:26 2013] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Sun May 26 06:56:26 2013] Initial guess for spatial extent in simple fitting = 10.25"
[Sun May 26 06:56:26 2013] source mask rpix=2.4, npix_max = 32, mask sum = 26, frac = 0.797
[Sun May 26 06:56:26 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.25"
[Sun May 26 07:27:30 2013] fullrun_mos1_xmm0037981901_pi300-10000_cl_pass0_src4.ximg exists
[Sun May 26 07:27:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981901_pi300-10000_cl_pass0_src4.csv
[Sun May 26 07:27:30 2013] fullrun_mos1_xmm0037981901_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun May 26 07:27:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981901_pi300-10000_cl_pass0_src4.csv
[Sun May 26 07:27:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037981901_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037981901_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 07:27:30 2013] fullrun_mos1_xmm0037981901_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun May 26 07:27:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981901_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun May 26 07:27:30 2013] fullrun_mos1_xmm0037981901_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun May 26 07:27:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981901_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun May 26 07:27:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037981901_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037981901_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 08:08:15 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 10.553204 pixels away
[Sun May 26 08:08:15 2013] Vigneting correction estimate = 1.000000
[Sun May 26 08:08:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 08:08:15 2013] Assessing source extent using major
[Sun May 26 08:08:15 2013] Source does appear to be extended
[Sun May 26 08:08:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 08:53:59 2013] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Sun May 26 08:53:59 2013] Initial guess for spatial extent in simple fitting = 10.25"
[Sun May 26 08:53:59 2013] source mask rpix=2.4, npix_max = 32, mask sum = 26, frac = 0.797
[Sun May 26 08:53:59 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 10.25"
[Sun May 26 09:21:48 2013] fullrun_mos1_xmm0037981901_pi300-10000_cl_pass1_src4.ximg exists
[Sun May 26 09:21:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981901_pi300-10000_cl_pass1_src4.csv
[Sun May 26 09:21:48 2013] fullrun_mos1_xmm0037981901_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun May 26 09:21:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981901_pi300-10000_cl_pass1_src4.csv
[Sun May 26 09:21:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037981901_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037981901_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 09:21:48 2013] fullrun_mos1_xmm0037981901_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun May 26 09:21:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981901_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun May 26 09:21:48 2013] fullrun_mos1_xmm0037981901_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun May 26 09:21:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981901_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun May 26 09:21:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037981901_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037981901_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 10:00:44 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.353156 pixels away
[Sun May 26 10:00:44 2013] Vigneting correction estimate = 1.000000
[Sun May 26 10:00:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 10:00:44 2013] Assessing source extent using major
[Sun May 26 10:00:44 2013] Source does appear to be extended
[Sun May 26 10:00:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 10:43:42 2013] XMMSAS src. selection expression = ellipse(17055.983292, 23547.865784, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 10:43:42 2013] Writing source region out to fullrun_mos1_xmm0037981901_pi300-10000_pass1_cl_src10_src.reg
[Sun May 26 10:43:42 2013] Extracting stamp from image fullrun_mos1_xmm0037981901_pi300-10000_cl_sm2.00.img.gz, (159, 234) - (234, 309)
[Sun May 26 10:43:42 2013] XMMSAS bgd. selection expression = annulus(17055.983292, 23547.865784, 1087.500000, 2175.000000, X, Y) && !ellipse(17345.982849, 21451.376328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18234.875800, 25446.376400, 1461.840042, 215.108806, 67.392114, X, Y) && !ellipse(19600.259369, 26560.960297, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 10:43:42 2013] Writing fullrun_mos1_xmm0037981901_pi300-10000_pass1_cl_src10.gif
[Sun May 26 10:45:17 2013] Mean detx,y = (2919.63, 6744.45) 
[Sun May 26 10:45:19 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 10:45:48 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 10:45:49 2013] Setting source spectrum file to fullrun_mos1_xmm0037981901_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun May 26 10:45:49 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0037981901_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun May 26 10:59:27 2013] Not generating rmf since there are only 98 counts
[Sun May 26 10:59:27 2013] rmf not generated due to insufficient counts
[Sun May 26 11:21:25 2013] Updating aperture counts using extracted products
[Sun May 26 11:21:25 2013] Total counts from fullrun_mos1_xmm0037981901_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 106.00
[Sun May 26 11:21:25 2013] Total counts from fullrun_mos1_xmm0037981901_pi300-10000_pass1_cl_src10_bgd.pi.gz = 163.00
[Sun May 26 11:21:25 2013] Got source and background scale factors 1008670.000000, 8142468.000000
[Sun May 26 11:21:25 2013] User source parameters:
  Position = (196.6, 271.2) = 2 27 44.52 -2 50 47.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 85.8 +/- 11.3
  Background aperture counts = 20.2
  Rate = 0.006 +/- 0.0008

[Sun May 26 11:21:25 2013] Updating counts from extracted products
[Sun May 26 11:21:25 2013] Set source signif. to 85.81/4.49 = 19.10
[Sun May 26 11:21:30 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 11:21:30 2013] Using photon index=1.80, rate=0.00642, arf fullrun_mos1_xmm0037981901_pi300-10000_pass1_cl_src10.arf
[Sun May 26 11:21:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 11:21:30 2013] Updating source flux to 8.9e-14
[Sun May 26 11:21:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 11:21:41 2013] xmm0037981901/analysis//spectral/fullrun_mos1_xmm0037981901_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete