[Fri Jul 13 10:11:53 2012] Detection parameters:
  Position = (320.1, 167.2) = 2 25 48.72 -2 58 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 758.5 +/- 33.0
  Background counts = 10.6
  Rate = 0.06 +/- 0.003

[Fri Jul 13 10:11:54 2012] Off-axis axis estimate = 9.65'
[Fri Jul 13 10:14:23 2012] Using EEF radius (= 11.25 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 10:14:23 2012] Initial guess for spatial extent in simple fitting = 11.25"
[Fri Jul 13 10:14:23 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.945
[Fri Jul 13 10:14:23 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.25"
[Fri Jul 13 11:24:44 2012] fullrun_pn_xmm0037981801_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jul 13 11:24:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037981801_pi300-10000_cl_pass0_src2.csv
[Fri Jul 13 11:24:44 2012] fullrun_pn_xmm0037981801_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jul 13 11:24:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037981801_pi300-10000_cl_pass0_src2.csv
[Fri Jul 13 11:24:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037981801_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037981801_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 11:24:45 2012] fullrun_pn_xmm0037981801_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jul 13 11:24:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037981801_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jul 13 11:24:45 2012] fullrun_pn_xmm0037981801_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jul 13 11:24:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037981801_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jul 13 11:24:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037981801_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037981801_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 13:13:37 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.980252 pixels away
[Fri Jul 13 13:13:37 2012] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.247462 pixels away
[Fri Jul 13 13:13:37 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 13:13:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 13:13:37 2012] Assessing source extent using major
[Fri Jul 13 13:13:37 2012] Source does appear to be extended
[Fri Jul 13 13:13:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 13:14:01 2012] Using EEF radius (= 11.25 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 13:14:01 2012] Initial guess for spatial extent in simple fitting = 11.25"
[Fri Jul 13 13:14:01 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.945
[Fri Jul 13 13:14:01 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.25"
[Fri Jul 13 14:09:04 2012] fullrun_pn_xmm0037981801_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jul 13 14:09:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037981801_pi300-10000_cl_pass1_src2.csv
[Fri Jul 13 14:09:04 2012] fullrun_pn_xmm0037981801_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jul 13 14:09:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037981801_pi300-10000_cl_pass1_src2.csv
[Fri Jul 13 14:09:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037981801_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037981801_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 14:09:04 2012] fullrun_pn_xmm0037981801_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jul 13 14:09:04 2012] fullrun_pn_xmm0037981801_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jul 13 14:09:04 2012] Fit fullrun_pn_xmm0037981801_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Jul 13 15:43:13 2012] Spatial fit model total counts = 827.264000, observed total counts = 794.000000
[Fri Jul 13 15:43:13 2012] Offset between fit and detection position for source 2 = 0.130132 pixels
[Fri Jul 13 15:43:13 2012] 828.176000 total counts/ 277.307000 bgd. counts: snr = 33.080184
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.130132 pixels
  Position = (320.1, 167.3) = 2 25 48.74 -2 58 19.5
  Extent = 6.1 (5.6-6.6)", rotation angle = 0
  Source counts = 550.9 +/- 28.8
  Background counts = 277.3
  Rate = 0.04 +/- 0.002
[Fri Jul 13 15:43:14 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 15:43:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 15:43:14 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 15:43:14 2012] Source does appear to be extended
[Fri Jul 13 15:43:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 15:43:34 2012] XMMSAS src. selection expression = ellipse(27798.004320, 14506.928000, 364.893010, 364.893010, 0.000000, X, Y)
[Fri Jul 13 15:43:34 2012] Writing source region out to fullrun_pn_xmm0037981801_pi300-10000_pass1_cl_src2_src.reg
[Fri Jul 13 15:43:34 2012] Extracting stamp from image fullrun_pn_xmm0037981801_pi300-10000_cl_sm2.00.img.gz, (299, 146) - (341, 188)
[Fri Jul 13 15:43:35 2012] XMMSAS bgd. selection expression = annulus(27798.004320, 14506.928000, 608.155017, 1216.310035, X, Y) && !ellipse(25949.230927, 14107.715302, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 15:43:35 2012] Writing fullrun_pn_xmm0037981801_pi300-10000_pass1_cl_src2.gif
[Fri Jul 13 15:44:12 2012] Mean detx,y = (-5492.61, -9206.89) 
[Fri Jul 13 15:44:14 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 15:44:26 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 15:44:27 2012] Setting source spectrum file to fullrun_pn_xmm0037981801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 13 15:44:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0037981801_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jul 13 16:56:29 2012] Updating aperture counts using extracted products
[Fri Jul 13 16:56:29 2012] Error reading totcts from fullrun_pn_xmm0037981801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 13 16:56:30 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 16:56:30 2012] Using photon index=1.80, rate=0.0425, arf fullrun_pn_xmm0037981801_pi300-10000_pass1_cl_src2.arf
[Fri Jul 13 16:56:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 16:56:30 2012] Updating source flux to 2.5e-13
[Fri Jul 13 16:57:47 2012] Reading fit data from xmm0037981801/analysis//spectral/fullrun_pn_xmm0037981801_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jul 13 16:57:47 2012] Spectral fit parameter nH value = 4.07086e+12
[Fri Jul 13 16:57:47 2012] Spectral fit parameter PhoIndex value = 1.98431
[Fri Jul 13 16:57:47 2012] Failed to get F(0.3-8.0) from xmm0037981801/analysis//spectral/fullrun_pn_xmm0037981801_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jul 13 16:57:47 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 16:57:47 2012] Using Nh = 4.1e+12, photon index=1.98, rate=0.0425, arf fullrun_pn_xmm0037981801_pi300-10000_pass1_cl_src2.arf
[Fri Jul 13 16:57:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 16:57:47 2012] Updating source flux to 2.2e-13