[Mon Jul 16 13:45:39 2012] Detection parameters:
  Position = (191.6, 384.6) = 2 28 25.66 -3 2 43.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.9 +/- 8.6
  Background counts = 8.3
  Rate = 0.005 +/- 0.001

[Mon Jul 16 13:45:39 2012] Off-axis axis estimate = 9.95'
[Mon Jul 16 14:41:11 2012] Using EEF radius (= 11.40 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 14:41:11 2012] Initial guess for spatial extent in simple fitting = 11.40"
[Mon Jul 16 14:41:11 2012] source mask rpix=2.6, npix_max = 38, mask sum = 49, frac = 1.257
[Mon Jul 16 14:41:11 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 11.40"
[Mon Jul 16 15:04:33 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_src6.ximg exists
[Mon Jul 16 15:04:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_src6.csv
[Mon Jul 16 15:04:33 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Jul 16 15:04:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_src6.csv
[Mon Jul 16 15:04:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 15:04:33 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Jul 16 15:04:33 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Jul 16 15:04:33 2012] Fit fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Mon Jul 16 15:04:49 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 14.749946 pixels away
[Mon Jul 16 15:04:49 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 15:04:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 15:04:49 2012] Assessing source extent using major
[Mon Jul 16 15:04:49 2012] Source does appear to be extended
[Mon Jul 16 15:04:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 15:59:02 2012] Using EEF radius (= 11.40 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 15:59:02 2012] Initial guess for spatial extent in simple fitting = 11.40"
[Mon Jul 16 15:59:02 2012] source mask rpix=2.6, npix_max = 38, mask sum = 49, frac = 1.257
[Mon Jul 16 15:59:02 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 11.40"
[Mon Jul 16 16:17:15 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_src6.ximg exists
[Mon Jul 16 16:17:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_src6.csv
[Mon Jul 16 16:17:15 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Jul 16 16:17:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_src6.csv
[Mon Jul 16 16:17:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 16:17:15 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Jul 16 16:17:15 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Jul 16 16:17:15 2012] Fit fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Mon Jul 16 16:17:26 2012] Spatial fit model total counts = 75.598200, observed total counts = 76.000000
[Mon Jul 16 16:17:26 2012] Offset between fit and detection position for source 8 = 0.252176 pixels
[Mon Jul 16 16:17:26 2012] 76.584600 total counts/ 56.897700 bgd. counts: snr = 2.609937
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.252176 pixels
  Position = (191.4, 384.4) = 2 28 25.72 -3 2 45.7
  Extent = 3.1 (2.9-4.3)", rotation angle = 0
  Source counts = 19.7 +/- 8.8
  Background counts = 56.9
  Rate = 0.002 +/- 0.0007
[Mon Jul 16 16:17:26 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 16:17:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 16:17:26 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 16:17:26 2012] Source does appear to be extended
[Mon Jul 16 16:17:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 16:46:35 2012] XMMSAS src. selection expression = ellipse(16602.789400, 33393.235600, 184.006819, 184.006819, 0.000000, X, Y)
[Mon Jul 16 16:46:35 2012] Writing source region out to fullrun_mos2_xmm0037981501_pi300-10000_pass1_cl_src8_src.reg
[Mon Jul 16 16:46:35 2012] Extracting stamp from image fullrun_mos2_xmm0037981501_pi300-10000_cl_sm2.00.img.gz, (181, 374) - (202, 395)
[Mon Jul 16 16:46:35 2012] XMMSAS bgd. selection expression = annulus(16602.789400, 33393.235600, 306.678031, 613.356062, X, Y)
[Mon Jul 16 16:46:35 2012] Writing fullrun_mos2_xmm0037981501_pi300-10000_pass1_cl_src8.gif
[Mon Jul 16 16:48:19 2012] Mean detx,y = (-10115.22, -5495.70) 
[Mon Jul 16 16:48:20 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 16:48:34 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 16:48:34 2012] Setting source spectrum file to fullrun_mos2_xmm0037981501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Jul 16 16:48:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0037981501_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon Jul 16 16:51:54 2012] Not generating rmf since there are only 19 counts
[Mon Jul 16 16:51:54 2012] rmf not generated due to insufficient counts
[Mon Jul 16 16:53:26 2012] Updating aperture counts using extracted products
[Mon Jul 16 16:53:26 2012] Error reading totcts from fullrun_mos2_xmm0037981501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Jul 16 16:53:27 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 16:53:27 2012] Using photon index=1.80, rate=0.0016, arf fullrun_mos2_xmm0037981501_pi300-10000_pass1_cl_src8.arf
[Mon Jul 16 16:53:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 16:53:27 2012] Updating source flux to 4.7e-14
[Mon Jul 16 16:53:40 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jul 16 16:53:41 2012] xmm0037981501/analysis//spectral/fullrun_mos2_xmm0037981501_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete