[Mon Jul 16 13:45:38 2012] Detection parameters: Position = (131.0, 294.9) = 2 28 43.27 -3 9 12.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 42.1 +/- 8.9 Background counts = 8.9 Rate = 0.003 +/- 0.0007 [Mon Jul 16 13:45:39 2012] Off-axis axis estimate = 12.14' [Mon Jul 16 14:41:11 2012] Using EEF radius (= 12.50 ")to estimate initial spatial extent for simple fitting [Mon Jul 16 14:41:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon Jul 16 14:41:11 2012] Initial guess for spatial extent in simple fitting = 12.50" [Mon Jul 16 14:41:11 2012] source mask rpix=2.9, npix_max = 45, mask sum = 36, frac = 0.791 [Mon Jul 16 14:41:11 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 12.50" [Mon Jul 16 15:04:33 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_src10.ximg exists [Mon Jul 16 15:04:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_src10.csv [Mon Jul 16 15:04:33 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_src10_1.ximg exists [Mon Jul 16 15:04:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_src10.csv [Mon Jul 16 15:04:33 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_src10_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jul 16 15:04:33 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_tfrozen_src10.ximg exists [Mon Jul 16 15:04:33 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists [Mon Jul 16 15:04:33 2012] Fit fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly [Mon Jul 16 15:04:49 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.038080 pixels away [Mon Jul 16 15:04:49 2012] Vigneting correction estimate = 1.000000 [Mon Jul 16 15:04:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jul 16 15:04:49 2012] Assessing source extent using major [Mon Jul 16 15:04:49 2012] Source does appear to be extended [Mon Jul 16 15:04:49 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jul 16 15:59:02 2012] Using EEF radius (= 12.50 ")to estimate initial spatial extent for simple fitting [Mon Jul 16 15:59:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon Jul 16 15:59:02 2012] Initial guess for spatial extent in simple fitting = 12.50" [Mon Jul 16 15:59:02 2012] source mask rpix=2.9, npix_max = 45, mask sum = 36, frac = 0.791 [Mon Jul 16 15:59:02 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 12.50" [Mon Jul 16 16:17:15 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_src10.ximg exists [Mon Jul 16 16:17:15 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_src10_1.ximg exists [Mon Jul 16 16:17:15 2012] Fit fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_src10 appears to have run properly [Mon Jul 16 16:17:15 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_tfrozen_src10.ximg exists [Mon Jul 16 16:17:15 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists [Mon Jul 16 16:17:15 2012] Fit fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly [Mon Jul 16 16:17:26 2012] Spatial fit model total counts = 76.996300, observed total counts = 77.000000 [Mon Jul 16 16:17:26 2012] Offset between fit and detection position for source 4 = 0.273955 pixels [Mon Jul 16 16:17:26 2012] 75.564100 total counts/ 53.640600 bgd. counts: snr = 2.993388 Spatial fit parameters: Offset between fit and detection position for source 4 = 0.273955 pixels Position = (131.0, 295.2) = 2 28 43.27 -3 9 13.5 Extent = 4.2 (3.1-6.1)", rotation angle = 0 Source counts = 21.9 +/- 8.7 Background counts = 53.6 Rate = 0.002 +/- 0.0007 [Mon Jul 16 16:17:26 2012] Vigneting correction estimate = 1.000000 [Mon Jul 16 16:17:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jul 16 16:17:26 2012] Assessing source extent using major axis lower bound [Mon Jul 16 16:17:26 2012] Source does appear to be extended [Mon Jul 16 16:17:26 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jul 16 16:46:35 2012] XMMSAS src. selection expression = ellipse(11344.889600, 25635.319600, 251.434207, 251.434207, 0.000000, X, Y) [Mon Jul 16 16:46:35 2012] Writing source region out to fullrun_mos2_xmm0037981501_pi300-10000_pass1_cl_src4_src.reg [Mon Jul 16 16:46:35 2012] Extracting stamp from image fullrun_mos2_xmm0037981501_pi300-10000_cl_sm2.00.img.gz, (117, 281) - (145, 310) [Mon Jul 16 16:46:35 2012] XMMSAS bgd. selection expression = annulus(11344.889600, 25635.319600, 419.057012, 838.114024, X, Y) [Mon Jul 16 16:46:35 2012] Writing fullrun_mos2_xmm0037981501_pi300-10000_pass1_cl_src4.gif [Mon Jul 16 16:49:28 2012] Mean detx,y = (-12422.81, 3590.30) [Mon Jul 16 16:49:30 2012] Setting backscal keywords in source and bgd. spectrum [Mon Jul 16 16:49:40 2012] Binned source spectrum to 10 counts/bin [Mon Jul 16 16:49:40 2012] Setting source spectrum file to fullrun_mos2_xmm0037981501_pi300-10000_pass1_cl_src4_src_b10.pi.gz [Mon Jul 16 16:49:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0037981501_pi300-10000_pass1_cl_src4_bgd.pi.gz [Mon Jul 16 16:52:18 2012] Not generating rmf since there are only 21 counts [Mon Jul 16 16:52:18 2012] rmf not generated due to insufficient counts [Mon Jul 16 16:53:26 2012] Updating aperture counts using extracted products [Mon Jul 16 16:53:26 2012] Error reading totcts from fullrun_mos2_xmm0037981501_pi300-10000_pass1_cl_src4_src_b10.pi.gz [Mon Jul 16 16:53:27 2012] Calculating source flux in energy range 0.30-8.00 [Mon Jul 16 16:53:27 2012] Using photon index=1.80, rate=0.00178, arf fullrun_mos2_xmm0037981501_pi300-10000_pass1_cl_src4.arf [Mon Jul 16 16:53:27 2012] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jul 16 16:53:27 2012] Updating source flux to 5.3e-14 [Mon Jul 16 16:53:40 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting [Mon Jul 16 16:53:41 2012] xmm0037981501/analysis//spectral/fullrun_mos2_xmm0037981501_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete