[Mon Jul 16 13:45:38 2012] Detection parameters:
  Position = (233.6, 215.6) = 2 28 13.47 -3 15 2.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 177.1 +/- 16.3
  Background counts = 8.6
  Rate = 0.02 +/- 0.002

[Mon Jul 16 13:45:39 2012] Off-axis axis estimate = 7.63'
[Mon Jul 16 14:41:11 2012] Using EEF radius (= 10.24 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 14:41:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 16 14:41:11 2012] Initial guess for spatial extent in simple fitting = 10.24"
[Mon Jul 16 14:41:11 2012] source mask rpix=2.4, npix_max = 32, mask sum = 19, frac = 0.583
[Mon Jul 16 14:41:11 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.24"
[Mon Jul 16 15:04:33 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul 16 15:04:33 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul 16 15:04:33 2012] Fit fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_src1 appears to have run properly
[Mon Jul 16 15:04:33 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul 16 15:04:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul 16 15:04:33 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul 16 15:04:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul 16 15:04:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037981501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 15:04:49 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.998230 pixels away
[Mon Jul 16 15:04:49 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 15:04:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 15:04:49 2012] Assessing source extent using major
[Mon Jul 16 15:04:49 2012] Source does appear to be extended
[Mon Jul 16 15:04:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 15:59:02 2012] Using EEF radius (= 10.24 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 15:59:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 16 15:59:02 2012] Initial guess for spatial extent in simple fitting = 10.24"
[Mon Jul 16 15:59:02 2012] source mask rpix=2.4, npix_max = 32, mask sum = 19, frac = 0.583
[Mon Jul 16 15:59:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.24"
[Mon Jul 16 16:17:15 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul 16 16:17:15 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul 16 16:17:15 2012] Fit fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_src1 appears to have run properly
[Mon Jul 16 16:17:15 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul 16 16:17:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jul 16 16:17:15 2012] fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul 16 16:17:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jul 16 16:17:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037981501_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 16:17:26 2012] Spatial fit model total counts = 192.359000, observed total counts = 194.000000
[Mon Jul 16 16:17:26 2012] Offset between fit and detection position for source 1 = 0.435174 pixels
[Mon Jul 16 16:17:26 2012] 193.040800 total counts/ 95.684100 bgd. counts: snr = 9.952816
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.435174 pixels
  Position = (233.2, 215.6) = 2 28 13.59 -3 14 59.7
  Extent = 6.1" x 3.6", rotation angle = 47
  Source counts = 97.4 +/- 13.9
  Background counts = 95.7
  Rate = 0.008 +/- 0.001
[Mon Jul 16 16:17:26 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 16:17:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 16:17:26 2012] Assessing source extent using major
[Mon Jul 16 16:17:26 2012] Source does appear to be extended
[Mon Jul 16 16:17:26 2012] Computing asymmetry using major and minor axis, asym = 1.70
[Mon Jul 16 16:17:26 2012] Source is asymmetric
[Mon Jul 16 16:46:35 2012] XMMSAS src. selection expression = ellipse(20235.569866, 18712.336386, 363.344410, 214.312891, 46.970034, X, Y)
[Mon Jul 16 16:46:35 2012] Writing source region out to fullrun_mos2_xmm0037981501_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul 16 16:46:35 2012] Extracting stamp from image fullrun_mos2_xmm0037981501_pi300-10000_cl_sm2.00.img.gz, (212, 195) - (254, 237)
[Mon Jul 16 16:46:35 2012] XMMSAS bgd. selection expression = annulus(20235.569866, 18712.336386, 605.574017, 1211.148035, X, Y)
[Mon Jul 16 16:46:35 2012] Writing fullrun_mos2_xmm0037981501_pi300-10000_pass1_cl_src1.gif
[Mon Jul 16 16:46:37 2012] Mean detx,y = (-1673.30, 7086.95) 
[Mon Jul 16 16:46:38 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 16:46:55 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 16:46:55 2012] Setting source spectrum file to fullrun_mos2_xmm0037981501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 16 16:46:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0037981501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul 16 16:51:24 2012] Not generating rmf since there are only 97 counts
[Mon Jul 16 16:51:24 2012] rmf not generated due to insufficient counts
[Mon Jul 16 16:53:26 2012] Updating aperture counts using extracted products
[Mon Jul 16 16:53:26 2012] Error reading totcts from fullrun_mos2_xmm0037981501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 16 16:53:27 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 16:53:27 2012] Using photon index=1.80, rate=0.00793, arf fullrun_mos2_xmm0037981501_pi300-10000_pass1_cl_src1.arf
[Mon Jul 16 16:53:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 16:53:27 2012] Updating source flux to 1.7e-13
[Mon Jul 16 16:53:40 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jul 16 16:53:41 2012] xmm0037981501/analysis//spectral/fullrun_mos2_xmm0037981501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete