[Mon Jul 16 13:45:18 2012] Detection parameters:
  Position = (233.1, 215.1) = 2 28 13.60 -3 15 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 211.9 +/- 18.0
  Background counts = 10.3
  Rate = 0.02 +/- 0.002

[Mon Jul 16 13:45:18 2012] Off-axis axis estimate = 7.68'
[Mon Jul 16 14:20:45 2012] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 14:20:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 16 14:20:45 2012] Initial guess for spatial extent in simple fitting = 10.27"
[Mon Jul 16 14:20:45 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.917
[Mon Jul 16 14:20:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.27"
[Mon Jul 16 14:41:11 2012] fullrun_mos1_xmm0037981501_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul 16 14:41:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981501_pi300-10000_cl_pass0_src1.csv
[Mon Jul 16 14:41:11 2012] fullrun_mos1_xmm0037981501_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul 16 14:41:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981501_pi300-10000_cl_pass0_src1.csv
[Mon Jul 16 14:41:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037981501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037981501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 14:41:11 2012] fullrun_mos1_xmm0037981501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul 16 14:41:11 2012] fullrun_mos1_xmm0037981501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul 16 14:41:11 2012] Fit fullrun_mos1_xmm0037981501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jul 16 15:04:45 2012] Spatial fit model total counts = 247.034000, observed total counts = 242.000000
[Mon Jul 16 15:04:45 2012] Offset between fit and detection position for source 1 = 0.327906 pixels
[Mon Jul 16 15:04:45 2012] 245.362900 total counts/ 88.614900 bgd. counts: snr = 16.651319
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.327906 pixels
  Position = (233.4, 215.3) = 2 28 13.51 -3 15 1.4
  Extent = 6.3 (5.4-7.2)", rotation angle = 0
  Source counts = 156.7 +/- 15.7
  Background counts = 88.6
  Rate = 0.01 +/- 0.001
[Mon Jul 16 15:04:45 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 15:04:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 15:04:45 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 15:04:45 2012] Source does appear to be extended
[Mon Jul 16 15:04:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 15:38:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 16 15:38:14 2012] Initial guess for spatial extent in simple fitting = 6.26"
[Mon Jul 16 15:38:14 2012] source mask rpix=1.4, npix_max = 15, mask sum = 14, frac = 0.931
[Mon Jul 16 15:38:14 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.26"
[Mon Jul 16 15:59:02 2012] fullrun_mos1_xmm0037981501_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul 16 15:59:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981501_pi300-10000_cl_pass1_src1.csv
[Mon Jul 16 15:59:02 2012] fullrun_mos1_xmm0037981501_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul 16 15:59:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981501_pi300-10000_cl_pass1_src1.csv
[Mon Jul 16 15:59:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037981501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037981501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 15:59:02 2012] fullrun_mos1_xmm0037981501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul 16 15:59:02 2012] fullrun_mos1_xmm0037981501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul 16 15:59:02 2012] Fit fullrun_mos1_xmm0037981501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul 16 16:17:23 2012] Spatial fit model total counts = 222.969000, observed total counts = 221.000000
[Mon Jul 16 16:17:23 2012] Offset between fit and detection position for source 1 = 0.039513 pixels
[Mon Jul 16 16:17:23 2012] 219.800200 total counts/ 63.192200 bgd. counts: snr = 19.700725
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.039513 pixels
  Position = (233.4, 215.3) = 2 28 13.51 -3 15 1.3
  Extent = 6.2 (5.6-7.0)", rotation angle = 0
  Source counts = 156.6 +/- 14.8
  Background counts = 63.2
  Rate = 0.01 +/- 0.001
[Mon Jul 16 16:17:23 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 16:17:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 16:17:23 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 16:17:23 2012] Source does appear to be extended
[Mon Jul 16 16:17:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 16:38:07 2012] XMMSAS src. selection expression = ellipse(20261.022200, 18681.422400, 374.133611, 374.133611, 0.000000, X, Y)
[Mon Jul 16 16:38:07 2012] Writing source region out to fullrun_mos1_xmm0037981501_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul 16 16:38:07 2012] Extracting stamp from image fullrun_mos1_xmm0037981501_pi300-10000_cl_sm2.00.img.gz, (212, 194) - (255, 237)
[Mon Jul 16 16:38:07 2012] XMMSAS bgd. selection expression = annulus(20261.022200, 18681.422400, 623.556018, 1247.112036, X, Y) && !ellipse(21210.265800, 17580.698400, 304.263209, 304.263209, 0.000000, X, Y)
[Mon Jul 16 16:38:07 2012] Writing fullrun_mos1_xmm0037981501_pi300-10000_pass1_cl_src1.gif
[Mon Jul 16 16:38:09 2012] Mean detx,y = (7312.60, 1520.27) 
[Mon Jul 16 16:38:10 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 16:38:29 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 16:38:29 2012] Setting source spectrum file to fullrun_mos1_xmm0037981501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 16 16:38:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0037981501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul 16 16:53:25 2012] Updating aperture counts using extracted products
[Mon Jul 16 16:53:25 2012] Error reading totcts from fullrun_mos1_xmm0037981501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 16 16:53:26 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 16:53:26 2012] Using photon index=1.80, rate=0.0127, arf fullrun_mos1_xmm0037981501_pi300-10000_pass1_cl_src1.arf
[Mon Jul 16 16:53:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 16:53:26 2012] Updating source flux to 2e-13
[Mon Jul 16 16:53:40 2012] Reading fit data from xmm0037981501/analysis//spectral/fullrun_mos1_xmm0037981501_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul 16 16:53:40 2012] Spectral fit parameter nH value = 1.09132e+23
[Mon Jul 16 16:53:40 2012] Spectral fit parameter PhoIndex value = 1.01817
[Mon Jul 16 16:53:40 2012] Failed to get F(0.3-8.0) from xmm0037981501/analysis//spectral/fullrun_mos1_xmm0037981501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul 16 16:53:40 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 16:53:40 2012] Using Nh = 1.1e+23, photon index=1.02, rate=0.0127, arf fullrun_mos1_xmm0037981501_pi300-10000_pass1_cl_src1.arf
[Mon Jul 16 16:53:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 16:53:40 2012] Updating source flux to 8.1e-13