[Wed Jul 18 16:21:38 2012] Detection parameters:
  Position = (199.8, 340.1) = 2 24 23.06 -3 6 13.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1086.9 +/- 50.3
  Background counts = 15.4
  Rate = 0.1 +/- 0.005

[Wed Jul 18 16:21:39 2012] Off-axis axis estimate = 7.76'
[Wed Jul 18 16:23:03 2012] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 16:23:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 18 16:23:03 2012] Initial guess for spatial extent in simple fitting = 10.31"
[Wed Jul 18 16:23:03 2012] source mask rpix=2.4, npix_max = 32, mask sum = 20, frac = 0.607
[Wed Jul 18 16:23:03 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.31"
[Wed Jul 18 16:54:48 2012] fullrun_pn_xmm0037981201_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jul 18 16:54:48 2012] fullrun_pn_xmm0037981201_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jul 18 16:54:48 2012] Fit fullrun_pn_xmm0037981201_pi300-10000_cl_pass0_src2 appears to have run properly
[Wed Jul 18 16:54:48 2012] fullrun_pn_xmm0037981201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jul 18 16:54:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037981201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Jul 18 16:54:48 2012] fullrun_pn_xmm0037981201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jul 18 16:54:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037981201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Jul 18 16:54:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037981201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037981201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 18:00:06 2012] Spatial fit model total counts = 2071.690000, observed total counts = 1488.000000
[Wed Jul 18 18:00:06 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 18 18:00:06 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.597999 pixels away
[Wed Jul 18 18:00:06 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 18:00:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 18:00:06 2012] Assessing source extent using major
[Wed Jul 18 18:00:06 2012] Source does appear to be extended
[Wed Jul 18 18:00:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 18:00:06 2012] Source is confused with source 1
[Wed Jul 18 18:00:19 2012] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 18:00:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 18 18:00:19 2012] Initial guess for spatial extent in simple fitting = 10.31"
[Wed Jul 18 18:00:19 2012] source mask rpix=2.4, npix_max = 32, mask sum = 20, frac = 0.607
[Wed Jul 18 18:00:19 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.31"
[Wed Jul 18 18:31:02 2012] fullrun_pn_xmm0037981201_pi300-10000_cl_pass1_src2.ximg exists
[Wed Jul 18 18:31:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037981201_pi300-10000_cl_pass1_src2.csv
[Wed Jul 18 18:31:02 2012] fullrun_pn_xmm0037981201_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Jul 18 18:31:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037981201_pi300-10000_cl_pass1_src2.csv
[Wed Jul 18 18:31:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037981201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037981201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 18:31:03 2012] fullrun_pn_xmm0037981201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Jul 18 18:31:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037981201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Jul 18 18:31:03 2012] fullrun_pn_xmm0037981201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jul 18 18:31:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037981201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Jul 18 18:31:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037981201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037981201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 19:18:49 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.177068 pixels away
[Wed Jul 18 19:18:49 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.452233 pixels away
[Wed Jul 18 19:18:49 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 19:18:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 19:18:49 2012] Assessing source extent using major
[Wed Jul 18 19:18:49 2012] Source does appear to be extended
[Wed Jul 18 19:18:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 19:19:01 2012] Counts = 1086.882568, rescaling region sizes by 2.000000
[Wed Jul 18 19:19:01 2012] XMMSAS src. selection expression = ellipse(17336.890701, 29544.347687, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jul 18 19:19:01 2012] Writing source region out to fullrun_pn_xmm0037981201_pi300-10000_pass1_cl_src2_src.reg
[Wed Jul 18 19:19:01 2012] Extracting stamp from image fullrun_pn_xmm0037981201_pi300-10000_cl_sm2.00.img.gz, (125, 265) - (275, 415)
[Wed Jul 18 19:19:01 2012] XMMSAS bgd. selection expression = annulus(17336.890701, 29544.347687, 4350.000000, 8700.000000, X, Y) && !ellipse(17261.088287, 28947.189117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13563.877686, 26143.924225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17601.877420, 23675.063800, 376.380811, 376.380811, 0.000000, X, Y) && !ellipse(14390.325912, 33469.542999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14157.392227, 30791.109619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23633.467880, 25044.086600, 443.881613, 443.881613, 0.000000, X, Y) && !ellipse(23066.657654, 23946.098938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17946.224220, 34530.842200, 431.421612, 431.421612, 0.000000, X, Y) && !ellipse(17792.708786, 23092.169830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20657.638062, 22796.319916, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 19:19:01 2012] Writing fullrun_pn_xmm0037981201_pi300-10000_pass1_cl_src2.gif
[Wed Jul 18 19:19:41 2012] Mean detx,y = (8190.99, 1411.39) 
[Wed Jul 18 19:19:44 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 19:22:31 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 19:22:32 2012] Setting source spectrum file to fullrun_pn_xmm0037981201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul 18 19:22:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0037981201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jul 18 19:30:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 19:30:27 2012] rmf not generated due to insufficient counts
[Wed Jul 18 19:57:13 2012] Updating aperture counts using extracted products
[Wed Jul 18 19:57:13 2012] Error reading totcts from fullrun_pn_xmm0037981201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul 18 19:57:14 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 19:57:14 2012] Using photon index=1.80, rate=0.111, arf fullrun_pn_xmm0037981201_pi300-10000_pass1_cl_src2.arf
[Wed Jul 18 19:57:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 19:57:14 2012] Updating source flux to 5.6e-13
[Wed Jul 18 19:57:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jul 18 19:57:35 2012] xmm0037981201/analysis//spectral/fullrun_pn_xmm0037981201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete