[Wed Jul 18 16:22:18 2012] Detection parameters:
  Position = (416.5, 362.8) = 2 23 20.14 -3 4 24.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.5 +/- 10.6
  Background counts = 7.6
  Rate = 0.005 +/- 0.0008

[Wed Jul 18 16:22:18 2012] Off-axis axis estimate = 9.75'
[Wed Jul 18 17:33:09 2012] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 17:33:09 2012] Initial guess for spatial extent in simple fitting = 11.30"
[Wed Jul 18 17:33:09 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.094
[Wed Jul 18 17:33:09 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 11.30"
[Wed Jul 18 18:00:01 2012] fullrun_mos2_xmm0037981201_pi300-10000_cl_pass0_src10.ximg exists
[Wed Jul 18 18:00:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981201_pi300-10000_cl_pass0_src10.csv
[Wed Jul 18 18:00:01 2012] fullrun_mos2_xmm0037981201_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Jul 18 18:00:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981201_pi300-10000_cl_pass0_src10.csv
[Wed Jul 18 18:00:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037981201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037981201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 18:00:01 2012] fullrun_mos2_xmm0037981201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Jul 18 18:00:01 2012] fullrun_mos2_xmm0037981201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Jul 18 18:00:01 2012] Fit fullrun_mos2_xmm0037981201_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Jul 18 18:00:12 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.491987 pixels away
[Wed Jul 18 18:00:12 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 18:00:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 18:00:12 2012] Assessing source extent using major
[Wed Jul 18 18:00:12 2012] Source does appear to be extended
[Wed Jul 18 18:00:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 18:58:08 2012] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 18:58:08 2012] Initial guess for spatial extent in simple fitting = 11.30"
[Wed Jul 18 18:58:08 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.094
[Wed Jul 18 18:58:08 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 11.30"
[Wed Jul 18 19:18:44 2012] fullrun_mos2_xmm0037981201_pi300-10000_cl_pass1_src10.ximg exists
[Wed Jul 18 19:18:44 2012] fullrun_mos2_xmm0037981201_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Jul 18 19:18:44 2012] Fit fullrun_mos2_xmm0037981201_pi300-10000_cl_pass1_src10 appears to have run properly
[Wed Jul 18 19:18:44 2012] fullrun_mos2_xmm0037981201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Jul 18 19:18:44 2012] fullrun_mos2_xmm0037981201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Jul 18 19:18:44 2012] Fit fullrun_mos2_xmm0037981201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Jul 18 19:18:54 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.322298 pixels away
[Wed Jul 18 19:18:54 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 19:18:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 19:18:54 2012] Assessing source extent using major
[Wed Jul 18 19:18:54 2012] Source does appear to be extended
[Wed Jul 18 19:18:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 19:47:53 2012] XMMSAS src. selection expression = ellipse(36184.121948, 31517.358368, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 19:47:53 2012] Writing source region out to fullrun_mos2_xmm0037981201_pi300-10000_pass1_cl_src2_src.reg
[Wed Jul 18 19:47:53 2012] Extracting stamp from image fullrun_mos2_xmm0037981201_pi300-10000_cl_sm2.00.img.gz, (379, 325) - (454, 400)
[Wed Jul 18 19:47:53 2012] XMMSAS bgd. selection expression = annulus(36184.121948, 31517.358368, 1087.500000, 2175.000000, X, Y)
[Wed Jul 18 19:47:53 2012] Writing fullrun_mos2_xmm0037981201_pi300-10000_pass1_cl_src2.gif
[Wed Jul 18 19:50:16 2012] Mean detx,y = (8491.11, -10702.77) 
[Wed Jul 18 19:50:17 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 19:50:25 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 19:50:25 2012] Setting source spectrum file to fullrun_mos2_xmm0037981201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul 18 19:50:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0037981201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jul 18 19:56:15 2012] Not generating rmf since there are only 66 counts
[Wed Jul 18 19:56:15 2012] rmf not generated due to insufficient counts
[Wed Jul 18 19:57:14 2012] Updating aperture counts using extracted products
[Wed Jul 18 19:57:14 2012] Error reading totcts from fullrun_mos2_xmm0037981201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul 18 19:57:15 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 19:57:15 2012] Using photon index=1.80, rate=0.00507, arf fullrun_mos2_xmm0037981201_pi300-10000_pass1_cl_src2.arf
[Wed Jul 18 19:57:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 19:57:15 2012] Updating source flux to 1.2e-13
[Wed Jul 18 19:57:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting