[Wed Jul 18 16:22:18 2012] Detection parameters:
  Position = (118.3, 371.1) = 2 24 46.74 -3 3 46.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.4 +/- 11.2
  Background counts = 7.7
  Rate = 0.006 +/- 0.0008

[Wed Jul 18 16:22:18 2012] Off-axis axis estimate = 14.08'
[Wed Jul 18 17:33:09 2012] Using EEF radius (= 13.47 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 17:33:09 2012] Initial guess for spatial extent in simple fitting = 13.47"
[Wed Jul 18 17:33:09 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.947
[Wed Jul 18 17:33:09 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 13.47"
[Wed Jul 18 18:00:01 2012] fullrun_mos2_xmm0037981201_pi300-10000_cl_pass0_src9.ximg exists
[Wed Jul 18 18:00:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981201_pi300-10000_cl_pass0_src9.csv
[Wed Jul 18 18:00:01 2012] fullrun_mos2_xmm0037981201_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Jul 18 18:00:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981201_pi300-10000_cl_pass0_src9.csv
[Wed Jul 18 18:00:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037981201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037981201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 18:00:01 2012] fullrun_mos2_xmm0037981201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Jul 18 18:00:01 2012] fullrun_mos2_xmm0037981201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Jul 18 18:00:01 2012] Fit fullrun_mos2_xmm0037981201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Jul 18 18:00:12 2012] Spatial fit model total counts = 107.221000, observed total counts = 107.000000
[Wed Jul 18 18:00:12 2012] Offset between fit and detection position for source 1 = 0.187665 pixels
[Wed Jul 18 18:00:12 2012] 108.578500 total counts/ 68.231600 bgd. counts: snr = 4.884469
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.187665 pixels
  Position = (118.5, 371.2) = 2 24 46.68 -3 3 47.7
  Extent = 5.7 (4.2-7.8)", rotation angle = 0
  Source counts = 40.3 +/- 10.4
  Background counts = 68.2
  Rate = 0.003 +/- 0.0009
[Wed Jul 18 18:00:12 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 18:00:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 18:00:12 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 18:00:12 2012] Source does appear to be extended
[Wed Jul 18 18:00:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 18:58:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 18 18:58:08 2012] Initial guess for spatial extent in simple fitting = 5.66"
[Wed Jul 18 18:58:08 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.925
[Wed Jul 18 18:58:08 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 5.66"
[Wed Jul 18 19:18:44 2012] fullrun_mos2_xmm0037981201_pi300-10000_cl_pass1_src9.ximg exists
[Wed Jul 18 19:18:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981201_pi300-10000_cl_pass1_src9.csv
[Wed Jul 18 19:18:44 2012] fullrun_mos2_xmm0037981201_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Jul 18 19:18:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981201_pi300-10000_cl_pass1_src9.csv
[Wed Jul 18 19:18:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037981201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037981201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 19:18:44 2012] fullrun_mos2_xmm0037981201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Jul 18 19:18:44 2012] fullrun_mos2_xmm0037981201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Jul 18 19:18:44 2012] Fit fullrun_mos2_xmm0037981201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Jul 18 19:18:54 2012] Warning, spatial fit 9 centroid is now closest to src. 3
[Wed Jul 18 19:18:54 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 19:18:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 19:18:54 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 19:18:54 2012] Source does appear to be extended
[Wed Jul 18 19:18:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 19:47:53 2012] XMMSAS src. selection expression = ellipse(10258.363600, 32242.005400, 339.574210, 339.574210, 0.000000, X, Y)
[Wed Jul 18 19:47:53 2012] Writing source region out to fullrun_mos2_xmm0037981201_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul 18 19:47:53 2012] Extracting stamp from image fullrun_mos2_xmm0037981201_pi300-10000_cl_sm2.00.img.gz, (99, 352) - (138, 391)
[Wed Jul 18 19:47:53 2012] XMMSAS bgd. selection expression = annulus(10258.363600, 32242.005400, 565.957016, 1131.914033, X, Y) && !ellipse(10584.997871, 33859.226959, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 19:47:53 2012] Writing fullrun_mos2_xmm0037981201_pi300-10000_pass1_cl_src1.gif
[Wed Jul 18 19:50:06 2012] Mean detx,y = (-15697.90, -1473.10) 
[Wed Jul 18 19:50:07 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 19:50:14 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 19:50:14 2012] Setting source spectrum file to fullrun_mos2_xmm0037981201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 18 19:50:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0037981201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul 18 19:56:11 2012] Not generating rmf since there are only 40 counts
[Wed Jul 18 19:56:11 2012] rmf not generated due to insufficient counts
[Wed Jul 18 19:57:14 2012] Updating aperture counts using extracted products
[Wed Jul 18 19:57:14 2012] Error reading totcts from fullrun_mos2_xmm0037981201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 18 19:57:15 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 19:57:15 2012] Using photon index=1.80, rate=0.00333, arf fullrun_mos2_xmm0037981201_pi300-10000_pass1_cl_src1.arf
[Wed Jul 18 19:57:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 19:57:15 2012] Updating source flux to 9.6e-14
[Wed Jul 18 19:57:17 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting