[Wed Jul 18 16:21:58 2012] Detection parameters:
  Position = (122.1, 390.0) = 2 24 45.62 -3 2 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 292.3 +/- 21.7
  Background counts = 6.9
  Rate = 0.02 +/- 0.002

[Wed Jul 18 16:21:59 2012] Off-axis axis estimate = 14.40'
[Wed Jul 18 16:54:48 2012] Using EEF radius (= 13.63 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 16:54:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 18 16:54:48 2012] Initial guess for spatial extent in simple fitting = 13.63"
[Wed Jul 18 16:54:48 2012] source mask rpix=3.1, npix_max = 52, mask sum = 55, frac = 1.042
[Wed Jul 18 16:54:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.63"
[Wed Jul 18 17:33:08 2012] fullrun_mos1_xmm0037981201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 18 17:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981201_pi300-10000_cl_pass0_src1.csv
[Wed Jul 18 17:33:08 2012] fullrun_mos1_xmm0037981201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 18 17:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981201_pi300-10000_cl_pass0_src1.csv
[Wed Jul 18 17:33:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037981201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037981201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 17:33:08 2012] fullrun_mos1_xmm0037981201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 18 17:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jul 18 17:33:08 2012] fullrun_mos1_xmm0037981201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 18 17:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jul 18 17:33:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037981201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037981201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 18:00:09 2012] Spatial fit model total counts = 374.652000, observed total counts = 337.000000
[Wed Jul 18 18:00:09 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 18 18:00:10 2012] Spatial fit model total counts = 123.313000, observed total counts = 114.000000
[Wed Jul 18 18:00:10 2012] Offset between fit and detection position for source 4 = 3.028591 pixels
[Wed Jul 18 18:00:10 2012] Warning, changing simple spatial fit ID from 1 to 17
[Wed Jul 18 18:00:10 2012] 113.262200 total counts/ 100.923000 bgd. counts: snr = 1.228265
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 3.028591 pixels
  Position = (124.2, 387.8) = 2 24 45.03 -3 2 35.5
  Extent = 8.8 (7.4-10.2)", rotation angle = 0
  Source counts = 12.3 +/- 10.6
  Background counts = 100.9
  Rate = 0.001 +/- 0.0009
  Deleting source due to low Poisson probability