[Tue May 22 17:22:13 2012] Detection parameters:
  Position = (355.0, 390.0) = 2 22 17.75 -3 2 24.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.7 +/- 6.3
  Background counts = 3.6
  Rate = 0.002 +/- 0.0005

[Tue May 22 17:22:14 2012] Off-axis axis estimate = 7.80'
[Tue May 22 18:24:28 2012] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Tue May 22 18:24:28 2012] Initial guess for spatial extent in simple fitting = 10.33"
[Tue May 22 18:24:28 2012] source mask rpix=2.4, npix_max = 33, mask sum = 24, frac = 0.726
[Tue May 22 18:24:28 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 10.33"
[Tue May 22 19:08:48 2012] fullrun_mos1_xmm0037981101_pi300-10000_cl_pass0_src16.ximg exists
[Tue May 22 19:08:48 2012] fullrun_mos1_xmm0037981101_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue May 22 19:08:48 2012] Fit fullrun_mos1_xmm0037981101_pi300-10000_cl_pass0_src16 appears to have run properly
[Tue May 22 19:08:48 2012] fullrun_mos1_xmm0037981101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue May 22 19:08:48 2012] fullrun_mos1_xmm0037981101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue May 22 19:08:48 2012] Fit fullrun_mos1_xmm0037981101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Tue May 22 20:02:47 2012] Spatial fit model total counts = 38.943200, observed total counts = 39.000000
[Tue May 22 20:02:47 2012] Offset between fit and detection position for source 3 = 0.469660 pixels
[Tue May 22 20:02:47 2012] 38.530800 total counts/ 23.888300 bgd. counts: snr = 2.995868
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.469660 pixels
  Position = (354.5, 390.0) = 2 22 17.88 -3 2 24.1
  Extent = 3.2 (2.6-5.2)", rotation angle = 0
  Source counts = 14.6 +/- 6.2
  Background counts = 23.9
  Rate = 0.001 +/- 0.0005
[Tue May 22 20:02:47 2012] Vigneting correction estimate = 1.000000
[Tue May 22 20:02:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 20:02:47 2012] Assessing source extent using major axis lower bound
[Tue May 22 20:02:47 2012] Source does appear to be extended
[Tue May 22 20:02:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 21:00:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 22 21:00:42 2012] Initial guess for spatial extent in simple fitting = 3.19"
[Tue May 22 21:00:42 2012] source mask rpix=0.7, npix_max = 6, mask sum = 6, frac = 0.985
[Tue May 22 21:00:42 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 3.19"
[Tue May 22 21:35:20 2012] fullrun_mos1_xmm0037981101_pi300-10000_cl_pass1_src16.ximg exists
[Tue May 22 21:35:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981101_pi300-10000_cl_pass1_src16.csv
[Tue May 22 21:35:20 2012] fullrun_mos1_xmm0037981101_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue May 22 21:35:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981101_pi300-10000_cl_pass1_src16.csv
[Tue May 22 21:35:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037981101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037981101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 21:35:20 2012] fullrun_mos1_xmm0037981101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue May 22 21:35:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Tue May 22 21:35:20 2012] fullrun_mos1_xmm0037981101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue May 22 21:35:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Tue May 22 21:35:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037981101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037981101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 22:28:29 2012] Warning, spatial fit 16 centroid is now closest to src. 2
[Tue May 22 22:28:29 2012] Vigneting correction estimate = 1.000000
[Tue May 22 22:28:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 22:28:29 2012] Assessing source extent using major axis lower bound
[Tue May 22 22:28:29 2012] Source does appear to be extended
[Tue May 22 22:28:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 22:58:51 2012] XMMSAS src. selection expression = ellipse(30794.490600, 33883.872400, 191.548206, 191.548206, 0.000000, X, Y)
[Tue May 22 22:58:51 2012] Writing source region out to fullrun_mos1_xmm0037981101_pi300-10000_pass1_cl_src3_src.reg
[Tue May 22 22:58:51 2012] Extracting stamp from image fullrun_mos1_xmm0037981101_pi300-10000_cl_sm2.00.img.gz, (344, 379) - (366, 401)
[Tue May 22 22:58:51 2012] XMMSAS bgd. selection expression = annulus(30794.490600, 33883.872400, 319.247009, 638.494018, X, Y)
[Tue May 22 22:58:51 2012] Writing fullrun_mos1_xmm0037981101_pi300-10000_pass1_cl_src3.gif
[Tue May 22 23:05:22 2012] Mean detx,y = (-10616.00, -2883.59) 
[Tue May 22 23:05:25 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 23:05:40 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 23:05:41 2012] Setting source spectrum file to fullrun_mos1_xmm0037981101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue May 22 23:05:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0037981101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue May 22 23:08:28 2012] Not generating rmf since there are only 14 counts
[Tue May 22 23:08:28 2012] rmf not generated due to insufficient counts
[Tue May 22 23:22:24 2012] Updating aperture counts using extracted products
[Tue May 22 23:22:24 2012] Error reading totcts from fullrun_mos1_xmm0037981101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue May 22 23:22:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 23:22:25 2012] Using photon index=1.80, rate=0.00111, arf fullrun_mos1_xmm0037981101_pi300-10000_pass1_cl_src3.arf
[Tue May 22 23:22:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 23:22:25 2012] Updating source flux to 3.8e-14
[Tue May 22 23:22:28 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 22 23:22:29 2012] xmm0037981101/analysis//spectral/fullrun_mos1_xmm0037981101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete