[Fri Jun 22 15:00:37 2012] Detection parameters:
  Position = (236.3, 316.2) = 2 27 32.25 -3 27 35.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 171.7 +/- 16.8
  Background counts = 4.2
  Rate = 0.02 +/- 0.002

[Fri Jun 22 15:00:38 2012] Off-axis axis estimate = 4.68'
[Fri Jun 22 16:03:52 2012] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 16:03:52 2012] Initial guess for spatial extent in simple fitting = 8.77"
[Fri Jun 22 16:03:52 2012] source mask rpix=2.0, npix_max = 25, mask sum = 19, frac = 0.750
[Fri Jun 22 16:03:52 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.77"
[Fri Jun 22 16:32:26 2012] fullrun_mos2_xmm0037981001_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 22 16:32:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981001_pi300-10000_cl_pass0_src1.csv
[Fri Jun 22 16:32:26 2012] fullrun_mos2_xmm0037981001_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 22 16:32:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981001_pi300-10000_cl_pass0_src1.csv
[Fri Jun 22 16:32:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037981001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037981001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 16:32:26 2012] fullrun_mos2_xmm0037981001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 22 16:32:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981001_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 22 16:32:26 2012] fullrun_mos2_xmm0037981001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 22 16:32:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981001_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 22 16:32:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037981001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037981001_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 16:32:42 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.756789 pixels away
[Fri Jun 22 16:32:42 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 16:32:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 16:32:42 2012] Assessing source extent using major
[Fri Jun 22 16:32:42 2012] Source does appear to be extended
[Fri Jun 22 16:32:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 17:22:14 2012] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 17:22:14 2012] Initial guess for spatial extent in simple fitting = 8.77"
[Fri Jun 22 17:22:14 2012] source mask rpix=2.0, npix_max = 25, mask sum = 19, frac = 0.750
[Fri Jun 22 17:22:14 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.77"
[Fri Jun 22 17:46:57 2012] fullrun_mos2_xmm0037981001_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 22 17:46:57 2012] fullrun_mos2_xmm0037981001_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 22 17:46:57 2012] Fit fullrun_mos2_xmm0037981001_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Jun 22 17:46:57 2012] fullrun_mos2_xmm0037981001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 22 17:46:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jun 22 17:46:57 2012] fullrun_mos2_xmm0037981001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 22 17:46:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jun 22 17:46:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037981001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037981001_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 17:47:08 2012] Spatial fit model total counts = 204.334000, observed total counts = 191.000000
[Fri Jun 22 17:47:08 2012] Offset between fit and detection position for source 4 = 1.183159 pixels
[Fri Jun 22 17:47:08 2012] 204.080500 total counts/ 89.478500 bgd. counts: snr = 12.115263
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.183159 pixels
  Position = (236.1, 317.3) = 2 27 32.33 -3 27 36.6
  Extent = 5.2" x 4.5", rotation angle = 15
  Source counts = 114.6 +/- 14.3
  Background counts = 89.5
  Rate = 0.009 +/- 0.001
[Fri Jun 22 17:47:08 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 17:47:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 17:47:08 2012] Assessing source extent using major
[Fri Jun 22 17:47:08 2012] Source does appear to be extended
[Fri Jun 22 17:47:08 2012] Computing asymmetry using major and minor axis, asym = 1.14
[Fri Jun 22 18:17:01 2012] XMMSAS src. selection expression = ellipse(20487.931791, 27559.932622, 309.545339, 272.129871, 14.724749, X, Y)
[Fri Jun 22 18:17:01 2012] Writing source region out to fullrun_mos2_xmm0037981001_pi300-10000_pass1_cl_src4_src.reg
[Fri Jun 22 18:17:01 2012] Extracting stamp from image fullrun_mos2_xmm0037981001_pi300-10000_cl_sm2.00.img.gz, (218, 300) - (254, 335)
[Fri Jun 22 18:17:01 2012] XMMSAS bgd. selection expression = annulus(20487.931791, 27559.932622, 515.908898, 1031.817796, X, Y) && !ellipse(19396.509800, 28618.674800, 346.136010, 346.136010, 0.000000, X, Y)
[Fri Jun 22 18:17:01 2012] Writing fullrun_mos2_xmm0037981001_pi300-10000_pass1_cl_src4.gif
[Fri Jun 22 18:17:03 2012] Mean detx,y = (-4449.61, -1041.58) 
[Fri Jun 22 18:17:04 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 18:17:12 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 18:17:12 2012] Setting source spectrum file to fullrun_mos2_xmm0037981001_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun 22 18:17:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0037981001_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jun 22 18:25:30 2012] Updating aperture counts using extracted products
[Fri Jun 22 18:25:30 2012] Error reading totcts from fullrun_mos2_xmm0037981001_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun 22 18:25:30 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 18:25:30 2012] Using photon index=1.80, rate=0.00858, arf fullrun_mos2_xmm0037981001_pi300-10000_pass1_cl_src4.arf
[Fri Jun 22 18:25:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 18:25:30 2012] Updating source flux to 1.4e-13
[Fri Jun 22 18:25:47 2012] Reading fit data from xmm0037981001/analysis//spectral/fullrun_mos2_xmm0037981001_pi300-10000_pass1_cl_src4_pl.csv
[Fri Jun 22 18:25:47 2012] Spectral fit parameter nH value = 8.29607e+14
[Fri Jun 22 18:25:47 2012] Spectral fit parameter PhoIndex value = 1.59987
[Fri Jun 22 18:25:47 2012] Failed to get F(0.3-8.0) from xmm0037981001/analysis//spectral/fullrun_mos2_xmm0037981001_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Fri Jun 22 18:25:47 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 18:25:47 2012] Using Nh = 8.3e+14, photon index=1.60, rate=0.00858, arf fullrun_mos2_xmm0037981001_pi300-10000_pass1_cl_src4.arf
[Fri Jun 22 18:25:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 18:25:47 2012] Updating source flux to 1.5e-13