[Fri Jun 22 15:00:37 2012] Detection parameters:
  Position = (410.6, 313.4) = 2 26 41.62 -3 27 51.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 141.2 +/- 14.6
  Background counts = 2.7
  Rate = 0.01 +/- 0.001

[Fri Jun 22 15:00:38 2012] Off-axis axis estimate = 8.21'
[Fri Jun 22 16:03:52 2012] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 16:03:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 22 16:03:52 2012] Initial guess for spatial extent in simple fitting = 10.53"
[Fri Jun 22 16:03:52 2012] source mask rpix=2.4, npix_max = 34, mask sum = 29, frac = 0.850
[Fri Jun 22 16:03:52 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.53"
[Fri Jun 22 16:32:26 2012] fullrun_mos2_xmm0037981001_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 22 16:32:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981001_pi300-10000_cl_pass0_src3.csv
[Fri Jun 22 16:32:26 2012] fullrun_mos2_xmm0037981001_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 22 16:32:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981001_pi300-10000_cl_pass0_src3.csv
[Fri Jun 22 16:32:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037981001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037981001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 16:32:26 2012] fullrun_mos2_xmm0037981001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 22 16:32:26 2012] fullrun_mos2_xmm0037981001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 22 16:32:26 2012] Fit fullrun_mos2_xmm0037981001_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jun 22 16:32:42 2012] Spatial fit model total counts = 137.018000, observed total counts = 134.000000
[Fri Jun 22 16:32:42 2012] Offset between fit and detection position for source 1 = 0.451094 pixels
[Fri Jun 22 16:32:42 2012] 137.571300 total counts/ 42.358700 bgd. counts: snr = 14.629285
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.451094 pixels
  Position = (410.4, 313.8) = 2 26 41.69 -3 27 51.9
  Extent = 5.9 (4.9-7.4)", rotation angle = 0
  Source counts = 95.2 +/- 11.7
  Background counts = 42.4
  Rate = 0.007 +/- 0.0009
[Fri Jun 22 16:32:42 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 16:32:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 16:32:42 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 16:32:42 2012] Source does appear to be extended
[Fri Jun 22 16:32:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 17:22:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 17:22:14 2012] Initial guess for spatial extent in simple fitting = 5.88"
[Fri Jun 22 17:22:14 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.875
[Fri Jun 22 17:22:14 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.88"
[Fri Jun 22 17:46:57 2012] fullrun_mos2_xmm0037981001_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jun 22 17:46:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981001_pi300-10000_cl_pass1_src2.csv
[Fri Jun 22 17:46:57 2012] fullrun_mos2_xmm0037981001_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jun 22 17:46:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037981001_pi300-10000_cl_pass1_src2.csv
[Fri Jun 22 17:46:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037981001_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037981001_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 17:46:57 2012] fullrun_mos2_xmm0037981001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jun 22 17:46:57 2012] fullrun_mos2_xmm0037981001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jun 22 17:46:57 2012] Fit fullrun_mos2_xmm0037981001_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Jun 22 17:47:08 2012] Spatial fit model total counts = 136.594000, observed total counts = 134.000000
[Fri Jun 22 17:47:08 2012] Offset between fit and detection position for source 1 = 0.008752 pixels
[Fri Jun 22 17:47:08 2012] 137.151400 total counts/ 42.841100 bgd. counts: snr = 14.408833
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008752 pixels
  Position = (410.4, 313.8) = 2 26 41.69 -3 27 51.9
  Extent = 5.8 (4.9-7.4)", rotation angle = 0
  Source counts = 94.3 +/- 11.7
  Background counts = 42.8
  Rate = 0.007 +/- 0.0009
[Fri Jun 22 17:47:08 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 17:47:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 17:47:08 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 17:47:08 2012] Source does appear to be extended
[Fri Jun 22 17:47:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 18:17:01 2012] XMMSAS src. selection expression = ellipse(35654.785000, 27252.583920, 347.100010, 347.100010, 0.000000, X, Y)
[Fri Jun 22 18:17:01 2012] Writing source region out to fullrun_mos2_xmm0037981001_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 22 18:17:01 2012] Extracting stamp from image fullrun_mos2_xmm0037981001_pi300-10000_cl_sm2.00.img.gz, (390, 294) - (430, 334)
[Fri Jun 22 18:17:01 2012] XMMSAS bgd. selection expression = annulus(35654.785000, 27252.583920, 578.500017, 1157.000033, X, Y)
[Fri Jun 22 18:17:01 2012] Writing fullrun_mos2_xmm0037981001_pi300-10000_pass1_cl_src1.gif
[Fri Jun 22 18:17:14 2012] Mean detx,y = (9661.75, -6608.17) 
[Fri Jun 22 18:17:15 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 18:17:32 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 18:17:32 2012] Setting source spectrum file to fullrun_mos2_xmm0037981001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 22 18:17:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0037981001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 22 18:23:58 2012] Not generating rmf since there are only 94 counts
[Fri Jun 22 18:23:58 2012] rmf not generated due to insufficient counts
[Fri Jun 22 18:25:30 2012] Updating aperture counts using extracted products
[Fri Jun 22 18:25:30 2012] Error reading totcts from fullrun_mos2_xmm0037981001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 22 18:25:30 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 18:25:30 2012] Using photon index=1.80, rate=0.00706, arf fullrun_mos2_xmm0037981001_pi300-10000_pass1_cl_src1.arf
[Fri Jun 22 18:25:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 18:25:30 2012] Updating source flux to 2.3e-13
[Fri Jun 22 18:25:38 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting