[Fri Jun 22 15:00:05 2012] Detection parameters:
  Position = (237.3, 404.0) = 2 27 31.96 -3 21 18.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.0 +/- 7.4
  Background counts = 3.9
  Rate = 0.005 +/- 0.001

[Fri Jun 22 15:00:05 2012] Off-axis axis estimate = 8.84'
[Fri Jun 22 15:35:34 2012] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 15:35:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 22 15:35:34 2012] Initial guess for spatial extent in simple fitting = 10.85"
[Fri Jun 22 15:35:34 2012] source mask rpix=2.5, npix_max = 35, mask sum = 32, frac = 0.892
[Fri Jun 22 15:35:34 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.85"
[Fri Jun 22 16:03:52 2012] fullrun_mos1_xmm0037981001_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jun 22 16:03:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981001_pi300-10000_cl_pass0_src5.csv
[Fri Jun 22 16:03:52 2012] fullrun_mos1_xmm0037981001_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jun 22 16:03:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981001_pi300-10000_cl_pass0_src5.csv
[Fri Jun 22 16:03:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037981001_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037981001_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 16:03:52 2012] fullrun_mos1_xmm0037981001_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jun 22 16:03:52 2012] fullrun_mos1_xmm0037981001_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jun 22 16:03:52 2012] Fit fullrun_mos1_xmm0037981001_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Jun 22 16:32:38 2012] Spatial fit model total counts = 57.067700, observed total counts = 54.000000
[Fri Jun 22 16:32:38 2012] Offset between fit and detection position for source 7 = 0.206012 pixels
[Fri Jun 22 16:32:38 2012] 56.851800 total counts/ 32.135900 bgd. counts: snr = 4.359947
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.206012 pixels
  Position = (237.1, 403.9) = 2 27 32.02 -3 21 19.9
  Extent = 3.4 (2.7-4.7)", rotation angle = 0
  Source counts = 24.7 +/- 7.5
  Background counts = 32.1
  Rate = 0.002 +/- 0.0006
[Fri Jun 22 16:32:38 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 16:32:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 16:32:38 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 16:32:38 2012] Source does appear to be extended
[Fri Jun 22 16:32:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 16:59:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 16:59:26 2012] Initial guess for spatial extent in simple fitting = 3.38"
[Fri Jun 22 16:59:26 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.613
[Fri Jun 22 16:59:26 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 3.38"
[Fri Jun 22 17:22:14 2012] fullrun_mos1_xmm0037981001_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jun 22 17:22:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981001_pi300-10000_cl_pass1_src5.csv
[Fri Jun 22 17:22:14 2012] fullrun_mos1_xmm0037981001_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jun 22 17:22:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981001_pi300-10000_cl_pass1_src5.csv
[Fri Jun 22 17:22:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037981001_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037981001_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 17:22:14 2012] fullrun_mos1_xmm0037981001_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jun 22 17:22:14 2012] fullrun_mos1_xmm0037981001_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jun 22 17:22:14 2012] Fit fullrun_mos1_xmm0037981001_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Jun 22 17:47:05 2012] Spatial fit model total counts = 56.992700, observed total counts = 54.000000
[Fri Jun 22 17:47:05 2012] Offset between fit and detection position for source 7 = 0.004638 pixels
[Fri Jun 22 17:47:05 2012] 56.774600 total counts/ 31.769400 bgd. counts: snr = 4.436350
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.004638 pixels
  Position = (237.1, 403.9) = 2 27 32.02 -3 21 19.9
  Extent = 3.5 (2.5-4.9)", rotation angle = 0
  Source counts = 25.0 +/- 7.5
  Background counts = 31.8
  Rate = 0.002 +/- 0.0006
[Fri Jun 22 17:47:05 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 17:47:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 17:47:05 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 17:47:05 2012] Source does appear to be extended
[Fri Jun 22 17:47:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 18:07:52 2012] XMMSAS src. selection expression = ellipse(20581.066860, 35093.007400, 211.622406, 211.622406, 0.000000, X, Y)
[Fri Jun 22 18:07:52 2012] Writing source region out to fullrun_mos1_xmm0037981001_pi300-10000_pass1_cl_src7_src.reg
[Fri Jun 22 18:07:52 2012] Extracting stamp from image fullrun_mos1_xmm0037981001_pi300-10000_cl_sm2.00.img.gz, (225, 392) - (249, 416)
[Fri Jun 22 18:07:52 2012] XMMSAS bgd. selection expression = annulus(20581.066860, 35093.007400, 352.704010, 705.408020, X, Y)
[Fri Jun 22 18:07:52 2012] Writing fullrun_mos1_xmm0037981001_pi300-10000_pass1_cl_src7.gif
[Fri Jun 22 18:08:53 2012] Mean detx,y = (-7844.04, 7055.00) 
[Fri Jun 22 18:08:54 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 18:09:04 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 18:09:04 2012] Setting source spectrum file to fullrun_mos1_xmm0037981001_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jun 22 18:09:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0037981001_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Jun 22 18:15:40 2012] Not generating rmf since there are only 25 counts
[Fri Jun 22 18:15:40 2012] rmf not generated due to insufficient counts
[Fri Jun 22 18:25:30 2012] Updating aperture counts using extracted products
[Fri Jun 22 18:25:30 2012] Error reading totcts from fullrun_mos1_xmm0037981001_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jun 22 18:25:30 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 18:25:30 2012] Using photon index=1.80, rate=0.00187, arf fullrun_mos1_xmm0037981001_pi300-10000_pass1_cl_src7.arf
[Fri Jun 22 18:25:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 18:25:30 2012] Updating source flux to 4.7e-14
[Fri Jun 22 18:25:31 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting