[Fri Jun 22 15:00:05 2012] Detection parameters:
  Position = (211.9, 282.4) = 2 27 39.34 -3 30 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21.6 +/- 6.1
  Background counts = 3.5
  Rate = 0.002 +/- 0.0006

[Fri Jun 22 15:00:05 2012] Off-axis axis estimate = 6.38'
[Fri Jun 22 15:35:34 2012] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 15:35:34 2012] Initial guess for spatial extent in simple fitting = 9.62"
[Fri Jun 22 15:35:34 2012] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.748
[Fri Jun 22 15:35:34 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 9.62"
[Fri Jun 22 16:03:52 2012] fullrun_mos1_xmm0037981001_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jun 22 16:03:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981001_pi300-10000_cl_pass0_src13.csv
[Fri Jun 22 16:03:52 2012] fullrun_mos1_xmm0037981001_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jun 22 16:03:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981001_pi300-10000_cl_pass0_src13.csv
[Fri Jun 22 16:03:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037981001_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037981001_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 16:03:52 2012] fullrun_mos1_xmm0037981001_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jun 22 16:03:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981001_pi300-10000_cl_pass0_tfrozen_src13.csv
[Fri Jun 22 16:03:52 2012] fullrun_mos1_xmm0037981001_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jun 22 16:03:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037981001_pi300-10000_cl_pass0_tfrozen_src13.csv
[Fri Jun 22 16:03:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037981001_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037981001_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 16:32:38 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 11.890080 pixels away
[Fri Jun 22 16:32:38 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 16:32:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 16:32:38 2012] Assessing source extent using major
[Fri Jun 22 16:32:38 2012] Source does appear to be extended
[Fri Jun 22 16:32:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 16:59:26 2012] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 16:59:26 2012] Initial guess for spatial extent in simple fitting = 9.62"
[Fri Jun 22 16:59:26 2012] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.748
[Fri Jun 22 16:59:26 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 9.62"
[Fri Jun 22 17:22:14 2012] fullrun_mos1_xmm0037981001_pi300-10000_cl_pass1_src12.ximg exists
[Fri Jun 22 17:22:14 2012] fullrun_mos1_xmm0037981001_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Jun 22 17:22:14 2012] Fit fullrun_mos1_xmm0037981001_pi300-10000_cl_pass1_src12 appears to have run properly
[Fri Jun 22 17:22:14 2012] fullrun_mos1_xmm0037981001_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Jun 22 17:22:14 2012] fullrun_mos1_xmm0037981001_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Jun 22 17:22:14 2012] Fit fullrun_mos1_xmm0037981001_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Fri Jun 22 17:47:05 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 44.495286 pixels away
[Fri Jun 22 17:47:05 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 10.888872 pixels away
[Fri Jun 22 17:47:05 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 17:47:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 17:47:05 2012] Assessing source extent using major
[Fri Jun 22 17:47:05 2012] Source does appear to be extended
[Fri Jun 22 17:47:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 18:07:52 2012] XMMSAS src. selection expression = ellipse(18389.165100, 24519.460480, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 22 18:07:52 2012] Writing source region out to fullrun_mos1_xmm0037981001_pi300-10000_pass1_cl_src13_src.reg
[Fri Jun 22 18:07:52 2012] Extracting stamp from image fullrun_mos1_xmm0037981001_pi300-10000_cl_sm2.00.img.gz, (174, 245) - (249, 320)
[Fri Jun 22 18:07:52 2012] XMMSAS bgd. selection expression = annulus(18389.165100, 24519.460480, 1087.500000, 2175.000000, X, Y) && !ellipse(20653.874557, 21685.592392, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 18:07:52 2012] Writing fullrun_mos1_xmm0037981001_pi300-10000_pass1_cl_src13.gif
[Fri Jun 22 18:10:52 2012] Mean detx,y = (2851.58, 5088.27) 
[Fri Jun 22 18:10:53 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 18:11:20 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 18:11:21 2012] Setting source spectrum file to fullrun_mos1_xmm0037981001_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Jun 22 18:11:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0037981001_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri Jun 22 18:16:32 2012] Not generating rmf since there are only 21 counts
[Fri Jun 22 18:16:32 2012] rmf not generated due to insufficient counts
[Fri Jun 22 18:25:30 2012] Updating aperture counts using extracted products
[Fri Jun 22 18:25:30 2012] Error reading totcts from fullrun_mos1_xmm0037981001_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Jun 22 18:25:30 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 18:25:30 2012] Using photon index=1.80, rate=0.00198, arf fullrun_mos1_xmm0037981001_pi300-10000_pass1_cl_src13.arf
[Fri Jun 22 18:25:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 18:25:30 2012] Updating source flux to 2.4e-14
[Fri Jun 22 18:25:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting