[Wed May 8 17:21:25 2013] Detection parameters: Position = (244.5, 485.9) = 2 26 21.02 -3 17 25.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 78.3 +/- 11.5 Background counts = 6.4 Rate = 0.008 +/- 0.001 [Wed May 8 17:21:25 2013] Off-axis axis estimate = 14.14' [Wed May 8 17:21:41 2013] Using EEF radius (= 13.50 ")to estimate initial spatial extent for simple fitting [Wed May 8 17:21:41 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 8 17:21:41 2013] Initial guess for spatial extent in simple fitting = 13.50" [Wed May 8 17:21:41 2013] source mask rpix=3.1, npix_max = 51, mask sum = 36, frac = 0.693 [Wed May 8 17:21:41 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 13.50" [Wed May 8 17:21:42 2013] fullrun_pn_xmm0037980901_pi300-10000_cl_pass0_src20.ximg exists [Wed May 8 17:21:42 2013] fullrun_pn_xmm0037980901_pi300-10000_cl_pass0_src20_1.ximg exists [Wed May 8 17:21:42 2013] Fit fullrun_pn_xmm0037980901_pi300-10000_cl_pass0_src20 appears to have run properly [Wed May 8 17:21:42 2013] fullrun_pn_xmm0037980901_pi300-10000_cl_pass0_tfrozen_src20.ximg exists [Wed May 8 17:21:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037980901_pi300-10000_cl_pass0_tfrozen_src20.csv [Wed May 8 17:21:42 2013] fullrun_pn_xmm0037980901_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists [Wed May 8 17:21:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037980901_pi300-10000_cl_pass0_tfrozen_src20.csv [Wed May 8 17:21:42 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0037980901_pi300-10000_cl_pass0_tfrozen_src20_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0037980901_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 17:21:49 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 17.085881 pixels away [Wed May 8 17:21:49 2013] Vigneting correction estimate = 1.000000 [Wed May 8 17:21:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 17:21:49 2013] Assessing source extent using major [Wed May 8 17:21:49 2013] Source does appear to be extended [Wed May 8 17:21:49 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 17:22:04 2013] Using EEF radius (= 13.50 ")to estimate initial spatial extent for simple fitting [Wed May 8 17:22:04 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 8 17:22:04 2013] Initial guess for spatial extent in simple fitting = 13.50" [Wed May 8 17:22:04 2013] source mask rpix=3.1, npix_max = 51, mask sum = 36, frac = 0.693 [Wed May 8 17:22:04 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 13.50" [Wed May 8 17:22:04 2013] fullrun_pn_xmm0037980901_pi300-10000_cl_pass1_src20.ximg exists [Wed May 8 17:22:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037980901_pi300-10000_cl_pass1_src20.csv [Wed May 8 17:22:04 2013] fullrun_pn_xmm0037980901_pi300-10000_cl_pass1_src20_1.ximg exists [Wed May 8 17:22:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037980901_pi300-10000_cl_pass1_src20.csv [Wed May 8 17:22:04 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0037980901_pi300-10000_cl_pass1_src20_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0037980901_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 17:22:05 2013] fullrun_pn_xmm0037980901_pi300-10000_cl_pass1_tfrozen_src20.ximg exists [Wed May 8 17:22:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037980901_pi300-10000_cl_pass1_tfrozen_src20.csv [Wed May 8 17:22:05 2013] fullrun_pn_xmm0037980901_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists [Wed May 8 17:22:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037980901_pi300-10000_cl_pass1_tfrozen_src20.csv [Wed May 8 17:22:05 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0037980901_pi300-10000_cl_pass1_tfrozen_src20_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0037980901_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 17:22:11 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 17.971355 pixels away [Wed May 8 17:22:11 2013] Vigneting correction estimate = 1.000000 [Wed May 8 17:22:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 17:22:11 2013] Assessing source extent using major [Wed May 8 17:22:11 2013] Source does appear to be extended [Wed May 8 17:22:11 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 17:22:26 2013] XMMSAS src. selection expression = ellipse(21223.407547, 42226.097778, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 8 17:22:26 2013] Not overwriting source region fullrun_pn_xmm0037980901_pi300-10000_pass1_cl_src21_src.reg [Wed May 8 17:22:26 2013] Extracting stamp from image fullrun_pn_xmm0037980901_pi300-10000_cl_sm2.00.img.gz, (207, 448) - (282, 523) [Wed May 8 17:22:26 2013] XMMSAS bgd. selection expression = annulus(21223.407547, 42226.097778, 1087.500000, 2175.000000, X, Y) && !ellipse(18554.028780, 40432.148000, 600.236997, 600.236997, 0.000000, X, Y) [Wed May 8 17:22:26 2013] Writing fullrun_pn_xmm0037980901_pi300-10000_pass1_cl_src21.gif [Wed May 8 17:22:27 2013] ../../xmm0037980901/products/events/fullrun_pn_xmm0037980901_pi300-10000_pass1_cl_src21_src.evt and ../../xmm0037980901/products/events/fullrun_pn_xmm0037980901_pi300-10000_pass1_cl_src21_bgd.evt exist, delete to re-create [Wed May 8 17:22:27 2013] Mean detx,y = (-10552.33, -12589.34) [Wed May 8 17:22:27 2013] ../../xmm0037980901/products/images/fullrun_pn_xmm0037980901_pi300-10000_pass1_cl_src21_src.img and ../../xmm0037980901/products/images/fullrun_pn_xmm0037980901_pi300-10000_pass1_cl_src21_bgd.img exist, delete to re-create [Wed May 8 17:22:27 2013] ../../xmm0037980901/products/spectra/fullrun_pn_xmm0037980901_pi300-10000_pass1_cl_src21_src_b10.pi.gz and ../../xmm0037980901/products/spectra/fullrun_pn_xmm0037980901_pi300-10000_pass1_cl_src21_bgd.pi exist, delete to re-create [Wed May 8 17:22:27 2013] Setting source spectrum file to fullrun_pn_xmm0037980901_pi300-10000_pass1_cl_src21_src_b10.pi.gz [Wed May 8 17:22:27 2013] Setting bgd. spectrum file to fullrun_pn_xmm0037980901_pi300-10000_pass1_cl_src21_bgd.pi.gz [Wed May 8 17:22:27 2013] ../../xmm0037980901/products/lightcurves/fullrun_pn_xmm0037980901_pi300-10000_pass1_cl_src21_src.lc and ../../xmm0037980901/products/lightcurves/fullrun_pn_xmm0037980901_pi300-10000_pass1_cl_src21_bgd.lc exist, delete to re-create [Wed May 8 17:22:29 2013] Not generating rmf since there are only 78 counts [Wed May 8 17:22:29 2013] rmf not generated due to insufficient counts [Wed May 8 17:22:29 2013] fullrun_pn_xmm0037980901_pi300-10000_pass1_cl_src21.arf exists, delete to re-create [Wed May 8 17:27:53 2013] Updating aperture counts using extracted products [Wed May 8 17:27:53 2013] Total counts from fullrun_pn_xmm0037980901_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 102.00 [Wed May 8 17:27:53 2013] Total counts from fullrun_pn_xmm0037980901_pi300-10000_pass1_cl_src21_bgd.pi.gz = 345.00 [Wed May 8 17:27:53 2013] Got source and background scale factors 926035.000000, 10434116.000000 [Wed May 8 17:27:53 2013] User source parameters: Position = (244.5, 485.9) = 2 26 21.02 -3 17 25.4 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 71.4 +/- 11.1 Background aperture counts = 30.6 Rate = 0.007 +/- 0.001 [Wed May 8 17:27:53 2013] Updating counts from extracted products [Wed May 8 17:27:53 2013] Set source signif. to 71.38/5.53 = 12.90 [Wed May 8 17:27:53 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 17:27:53 2013] Using photon index=1.80, rate=0.00714, arf fullrun_pn_xmm0037980901_pi300-10000_pass1_cl_src21.arf [Wed May 8 17:27:53 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 17:27:53 2013] Getting flux using calc_pl_flux failed [Wed May 8 17:28:03 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 8 17:28:04 2013] xmm0037980901/analysis//spectral/fullrun_pn_xmm0037980901_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete