[Tue May 15 13:25:54 2012] Detection parameters: Position = (314.2, 284.4) = 2 23 21.16 -3 31 58.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 30.2 +/- 8.0 Background counts = 9.6 Rate = 0.005 +/- 0.001 [Tue May 15 13:25:54 2012] Off-axis axis estimate = 1.53' [Tue May 15 13:28:06 2012] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting [Tue May 15 13:28:06 2012] Initial guess for spatial extent in simple fitting = 7.20" [Tue May 15 13:28:06 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.077 [Tue May 15 13:28:06 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.20" [Tue May 15 14:01:59 2012] fullrun_pn_xmm0037980701_pi300-10000_cl_pass0_src13.ximg exists [Tue May 15 14:01:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037980701_pi300-10000_cl_pass0_src13.csv [Tue May 15 14:01:59 2012] fullrun_pn_xmm0037980701_pi300-10000_cl_pass0_src13_1.ximg exists [Tue May 15 14:01:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037980701_pi300-10000_cl_pass0_src13.csv [Tue May 15 14:01:59 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0037980701_pi300-10000_cl_pass0_src13_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0037980701_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 15 14:01:59 2012] fullrun_pn_xmm0037980701_pi300-10000_cl_pass0_tfrozen_src13.ximg exists [Tue May 15 14:01:59 2012] fullrun_pn_xmm0037980701_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists [Tue May 15 14:01:59 2012] Fit fullrun_pn_xmm0037980701_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly [Tue May 15 14:36:16 2012] Source 13 is offset by -4.845327 and 5.762718 pixels which is larger than 2 X fitted extent = 0.827131 x 0.827131, not incorporating fit results [Tue May 15 14:36:16 2012] Vigneting correction estimate = 1.000000 [Tue May 15 14:36:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 15 14:36:16 2012] Assessing source extent using major [Tue May 15 14:36:16 2012] Source does appear to be extended [Tue May 15 14:36:16 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 15 14:36:32 2012] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting [Tue May 15 14:36:32 2012] Initial guess for spatial extent in simple fitting = 7.20" [Tue May 15 14:36:32 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.077 [Tue May 15 14:36:32 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 7.20" [Tue May 15 15:07:01 2012] fullrun_pn_xmm0037980701_pi300-10000_cl_pass1_src13.ximg exists [Tue May 15 15:07:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037980701_pi300-10000_cl_pass1_src13.csv [Tue May 15 15:07:01 2012] fullrun_pn_xmm0037980701_pi300-10000_cl_pass1_src13_1.ximg exists [Tue May 15 15:07:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037980701_pi300-10000_cl_pass1_src13.csv [Tue May 15 15:07:01 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0037980701_pi300-10000_cl_pass1_src13_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0037980701_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 15 15:07:01 2012] fullrun_pn_xmm0037980701_pi300-10000_cl_pass1_tfrozen_src13.ximg exists [Tue May 15 15:07:01 2012] fullrun_pn_xmm0037980701_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists [Tue May 15 15:07:01 2012] Fit fullrun_pn_xmm0037980701_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly [Tue May 15 15:44:17 2012] Source 13 is offset by -4.787902 and 5.712213 pixels which is larger than 2 X fitted extent = 0.827131 x 0.827131, not incorporating fit results [Tue May 15 15:44:17 2012] Vigneting correction estimate = 1.000000 [Tue May 15 15:44:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 15 15:44:17 2012] Assessing source extent using major [Tue May 15 15:44:17 2012] Source does appear to be extended [Tue May 15 15:44:17 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 15 15:44:32 2012] XMMSAS src. selection expression = ellipse(27290.514557, 24689.958496, 652.500000, 652.500000, 0.000000, X, Y) [Tue May 15 15:44:32 2012] Writing source region out to fullrun_pn_xmm0037980701_pi300-10000_pass1_cl_src13_src.reg [Tue May 15 15:44:32 2012] Extracting stamp from image fullrun_pn_xmm0037980701_pi300-10000_cl_sm2.00.img.gz, (277, 247) - (352, 322) [Tue May 15 15:44:32 2012] XMMSAS bgd. selection expression = annulus(27290.514557, 24689.958496, 1087.500000, 2175.000000, X, Y) [Tue May 15 15:44:32 2012] Writing fullrun_pn_xmm0037980701_pi300-10000_pass1_cl_src13.gif [Tue May 15 15:53:25 2012] Mean detx,y = (677.02, 2145.18) [Tue May 15 15:53:29 2012] Setting backscal keywords in source and bgd. spectrum [Tue May 15 15:53:56 2012] Binned source spectrum to 10 counts/bin [Tue May 15 15:53:56 2012] Setting source spectrum file to fullrun_pn_xmm0037980701_pi300-10000_pass1_cl_src13_src_b10.pi.gz [Tue May 15 15:53:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0037980701_pi300-10000_pass1_cl_src13_bgd.pi.gz [Tue May 15 15:59:36 2012] Not generating rmf since there are only 30 counts [Tue May 15 15:59:36 2012] rmf not generated due to insufficient counts [Tue May 15 16:11:52 2012] Updating aperture counts using extracted products [Tue May 15 16:11:52 2012] Error reading totcts from fullrun_pn_xmm0037980701_pi300-10000_pass1_cl_src13_src_b10.pi.gz [Tue May 15 16:11:52 2012] Calculating source flux in energy range 0.30-8.00 [Tue May 15 16:11:52 2012] Using photon index=1.80, rate=0.00454, arf fullrun_pn_xmm0037980701_pi300-10000_pass1_cl_src13.arf [Tue May 15 16:11:52 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 15 16:11:52 2012] Updating source flux to 1.1e-14 [Tue May 15 16:11:58 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Tue May 15 16:11:59 2012] xmm0037980701/analysis//spectral/fullrun_pn_xmm0037980701_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete