[Tue May 15 13:26:15 2012] Detection parameters:
  Position = (316.2, 471.5) = 2 23 20.58 -3 18 22.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.2 +/- 7.8
  Background counts = 4.3
  Rate = 0.003 +/- 0.0006

[Tue May 15 13:26:15 2012] Off-axis axis estimate = 12.61'
[Tue May 15 14:01:59 2012] Using EEF radius (= 12.74 ")to estimate initial spatial extent for simple fitting
[Tue May 15 14:01:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 15 14:01:59 2012] Initial guess for spatial extent in simple fitting = 12.74"
[Tue May 15 14:01:59 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.043
[Tue May 15 14:01:59 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 12.74"
[Tue May 15 14:20:50 2012] fullrun_mos1_xmm0037980701_pi300-10000_cl_pass0_src6.ximg exists
[Tue May 15 14:20:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037980701_pi300-10000_cl_pass0_src6.csv
[Tue May 15 14:20:50 2012] fullrun_mos1_xmm0037980701_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue May 15 14:20:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037980701_pi300-10000_cl_pass0_src6.csv
[Tue May 15 14:20:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037980701_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037980701_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 14:20:50 2012] fullrun_mos1_xmm0037980701_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue May 15 14:20:50 2012] fullrun_mos1_xmm0037980701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue May 15 14:20:50 2012] Fit fullrun_mos1_xmm0037980701_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Tue May 15 14:36:19 2012] Spatial fit model total counts = 75.999900, observed total counts = 76.000000
[Tue May 15 14:36:19 2012] Offset between fit and detection position for source 10 = 0.078983 pixels
[Tue May 15 14:36:19 2012] 75.958800 total counts/ 50.164400 bgd. counts: snr = 3.641897
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.078983 pixels
  Position = (316.3, 471.5) = 2 23 20.56 -3 18 24.2
  Extent = 7.5 (4.8-10.5)", rotation angle = 0
  Source counts = 25.8 +/- 8.7
  Background counts = 50.2
  Rate = 0.002 +/- 0.0007
[Tue May 15 14:36:19 2012] Vigneting correction estimate = 1.000000
[Tue May 15 14:36:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 14:36:19 2012] Assessing source extent using major axis lower bound
[Tue May 15 14:36:19 2012] Source does appear to be extended
[Tue May 15 14:36:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 15:07:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 15 15:07:01 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Tue May 15 15:07:01 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.275
[Tue May 15 15:07:01 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.46"
[Tue May 15 15:27:20 2012] fullrun_mos1_xmm0037980701_pi300-10000_cl_pass1_src6.ximg exists
[Tue May 15 15:27:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037980701_pi300-10000_cl_pass1_src6.csv
[Tue May 15 15:27:20 2012] fullrun_mos1_xmm0037980701_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue May 15 15:27:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037980701_pi300-10000_cl_pass1_src6.csv
[Tue May 15 15:27:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037980701_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037980701_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 15:27:20 2012] fullrun_mos1_xmm0037980701_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue May 15 15:27:20 2012] fullrun_mos1_xmm0037980701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue May 15 15:27:20 2012] Fit fullrun_mos1_xmm0037980701_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Tue May 15 15:44:20 2012] Spatial fit model total counts = 63.999900, observed total counts = 64.000000
[Tue May 15 15:44:20 2012] Offset between fit and detection position for source 10 = 0.080857 pixels
[Tue May 15 15:44:20 2012] 64.764400 total counts/ 38.512800 bgd. counts: snr = 4.230125
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.080857 pixels
  Position = (316.3, 471.5) = 2 23 20.58 -3 18 24.4
  Extent = 7.5 (4.9-10.6)", rotation angle = 0
  Source counts = 26.3 +/- 8.0
  Background counts = 38.5
  Rate = 0.002 +/- 0.0007
[Tue May 15 15:44:20 2012] Vigneting correction estimate = 1.000000
[Tue May 15 15:44:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 15:44:20 2012] Assessing source extent using major axis lower bound
[Tue May 15 15:44:20 2012] Source does appear to be extended
[Tue May 15 15:44:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 16:00:44 2012] XMMSAS src. selection expression = ellipse(27465.273200, 40969.729800, 451.406413, 451.406413, 0.000000, X, Y)
[Tue May 15 16:00:44 2012] Writing source region out to fullrun_mos1_xmm0037980701_pi300-10000_pass1_cl_src10_src.reg
[Tue May 15 16:00:44 2012] Extracting stamp from image fullrun_mos1_xmm0037980701_pi300-10000_cl_sm2.00.img.gz, (290, 446) - (342, 497)
[Tue May 15 16:00:44 2012] XMMSAS bgd. selection expression = annulus(27465.273200, 40969.729800, 752.344022, 1504.688043, X, Y)
[Tue May 15 16:00:44 2012] Writing fullrun_mos1_xmm0037980701_pi300-10000_pass1_cl_src10.gif
[Tue May 15 16:03:11 2012] Mean detx,y = (13189.32, -5378.70) 
[Tue May 15 16:03:13 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 16:03:29 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 16:03:29 2012] Setting source spectrum file to fullrun_mos1_xmm0037980701_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue May 15 16:03:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0037980701_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue May 15 16:06:06 2012] Not generating rmf since there are only 26 counts
[Tue May 15 16:06:06 2012] rmf not generated due to insufficient counts
[Tue May 15 16:11:53 2012] Updating aperture counts using extracted products
[Tue May 15 16:11:53 2012] Error reading totcts from fullrun_mos1_xmm0037980701_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue May 15 16:11:53 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 16:11:53 2012] Using photon index=1.80, rate=0.00212, arf fullrun_mos1_xmm0037980701_pi300-10000_pass1_cl_src10.arf
[Tue May 15 16:11:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 16:11:53 2012] Updating source flux to 5.5e-14
[Tue May 15 16:11:56 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 15 16:11:57 2012] xmm0037980701/analysis//spectral/fullrun_mos1_xmm0037980701_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete