[Mon Jun  4 10:18:18 2012] Detection parameters:
  Position = (394.8, 363.4) = 2 27 37.47 -3 46 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.4 +/- 9.2
  Background counts = 13.5
  Rate = 0.005 +/- 0.001

[Mon Jun  4 10:18:18 2012] Off-axis axis estimate = 8.42'
[Mon Jun  4 10:20:52 2012] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 10:20:52 2012] Initial guess for spatial extent in simple fitting = 10.64"
[Mon Jun  4 10:20:52 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.037
[Mon Jun  4 10:20:52 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.64"
[Mon Jun  4 11:00:38 2012] fullrun_pn_xmm0037980501_pi300-10000_cl_pass0_src9.ximg exists
[Mon Jun  4 11:00:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037980501_pi300-10000_cl_pass0_src9.csv
[Mon Jun  4 11:00:38 2012] fullrun_pn_xmm0037980501_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon Jun  4 11:00:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037980501_pi300-10000_cl_pass0_src9.csv
[Mon Jun  4 11:00:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037980501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037980501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 11:00:38 2012] fullrun_pn_xmm0037980501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon Jun  4 11:00:38 2012] fullrun_pn_xmm0037980501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Jun  4 11:00:38 2012] Fit fullrun_pn_xmm0037980501_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Jun  4 12:12:14 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 14.424379 pixels away
[Mon Jun  4 12:12:14 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 12:12:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 12:12:14 2012] Assessing source extent using major
[Mon Jun  4 12:12:14 2012] Source does appear to be extended
[Mon Jun  4 12:12:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 12:12:36 2012] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 12:12:36 2012] Initial guess for spatial extent in simple fitting = 10.64"
[Mon Jun  4 12:12:36 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.037
[Mon Jun  4 12:12:36 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.64"
[Mon Jun  4 12:42:57 2012] fullrun_pn_xmm0037980501_pi300-10000_cl_pass1_src9.ximg exists
[Mon Jun  4 12:42:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037980501_pi300-10000_cl_pass1_src9.csv
[Mon Jun  4 12:42:57 2012] fullrun_pn_xmm0037980501_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon Jun  4 12:42:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037980501_pi300-10000_cl_pass1_src9.csv
[Mon Jun  4 12:42:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037980501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037980501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 12:42:58 2012] fullrun_pn_xmm0037980501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon Jun  4 12:42:58 2012] fullrun_pn_xmm0037980501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Jun  4 12:42:58 2012] Fit fullrun_pn_xmm0037980501_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Jun  4 13:46:26 2012] Spatial fit model total counts = 104.982000, observed total counts = 105.000000
[Mon Jun  4 13:46:26 2012] Offset between fit and detection position for source 10 = 0.459619 pixels
[Mon Jun  4 13:46:26 2012] 104.977100 total counts/ 83.393200 bgd. counts: snr = 2.363549
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.459619 pixels
  Position = (394.5, 363.1) = 2 27 37.55 -3 46 19.7
  Extent = 3.5 (2.7-6.6)", rotation angle = 0
  Source counts = 21.6 +/- 10.2
  Background counts = 83.4
  Rate = 0.002 +/- 0.0008
[Mon Jun  4 13:46:26 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 13:46:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 13:46:26 2012] Assessing source extent using major axis lower bound
[Mon Jun  4 13:46:26 2012] Source does appear to be extended
[Mon Jun  4 13:46:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 13:46:49 2012] XMMSAS src. selection expression = ellipse(34269.930600, 31537.762000, 208.805406, 208.805406, 0.000000, X, Y)
[Mon Jun  4 13:46:49 2012] Writing source region out to fullrun_pn_xmm0037980501_pi300-10000_pass1_cl_src10_src.reg
[Mon Jun  4 13:46:49 2012] Extracting stamp from image fullrun_pn_xmm0037980501_pi300-10000_cl_sm2.00.img.gz, (382, 351) - (406, 375)
[Mon Jun  4 13:46:49 2012] XMMSAS bgd. selection expression = annulus(34269.930600, 31537.762000, 348.009010, 696.018020, X, Y)
[Mon Jun  4 13:46:49 2012] Writing fullrun_pn_xmm0037980501_pi300-10000_pass1_cl_src10.gif
[Mon Jun  4 13:53:26 2012] Mean detx,y = (5052.07, -6519.21) 
[Mon Jun  4 13:53:30 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  4 13:53:54 2012] Binned source spectrum to 10 counts/bin
[Mon Jun  4 13:53:55 2012] Setting source spectrum file to fullrun_pn_xmm0037980501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jun  4 13:53:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0037980501_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Jun  4 14:14:30 2012] Not generating rmf since there are only 21 counts
[Mon Jun  4 14:14:30 2012] rmf not generated due to insufficient counts
[Mon Jun  4 14:44:18 2012] Updating aperture counts using extracted products
[Mon Jun  4 14:44:18 2012] Error reading totcts from fullrun_pn_xmm0037980501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jun  4 14:44:19 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 14:44:19 2012] Using photon index=1.80, rate=0.00175, arf fullrun_pn_xmm0037980501_pi300-10000_pass1_cl_src10.arf
[Mon Jun  4 14:44:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 14:44:19 2012] Updating source flux to 9.6e-15
[Mon Jun  4 14:44:36 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting