[Mon Jun  4 10:19:23 2012] Detection parameters:
  Position = (358.8, 207.1) = 2 27 47.91 -3 57 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 165.6 +/- 16.1
  Background counts = 7.0
  Rate = 0.01 +/- 0.001

[Mon Jun  4 10:19:24 2012] Off-axis axis estimate = 7.94'
[Mon Jun  4 11:42:03 2012] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 11:42:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun  4 11:42:03 2012] Initial guess for spatial extent in simple fitting = 10.40"
[Mon Jun  4 11:42:03 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.077
[Mon Jun  4 11:42:03 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.40"
[Mon Jun  4 12:12:07 2012] fullrun_mos2_xmm0037980501_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun  4 12:12:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037980501_pi300-10000_cl_pass0_src1.csv
[Mon Jun  4 12:12:07 2012] fullrun_mos2_xmm0037980501_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun  4 12:12:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037980501_pi300-10000_cl_pass0_src1.csv
[Mon Jun  4 12:12:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037980501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037980501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 12:12:07 2012] fullrun_mos2_xmm0037980501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun  4 12:12:07 2012] fullrun_mos2_xmm0037980501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun  4 12:12:07 2012] Fit fullrun_mos2_xmm0037980501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jun  4 12:12:24 2012] Spatial fit model total counts = 204.741000, observed total counts = 190.000000
[Mon Jun  4 12:12:24 2012] Offset between fit and detection position for source 1 = 0.240353 pixels
[Mon Jun  4 12:12:24 2012] 206.835600 total counts/ 89.852600 bgd. counts: snr = 12.341201
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.240353 pixels
  Position = (358.6, 207.0) = 2 27 47.98 -3 57 38.5
  Extent = 6.0 (5.0-6.9)", rotation angle = 0
  Source counts = 117.0 +/- 14.4
  Background counts = 89.9
  Rate = 0.007 +/- 0.0009
[Mon Jun  4 12:12:24 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 12:12:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 12:12:24 2012] Assessing source extent using major axis lower bound
[Mon Jun  4 12:12:24 2012] Source does appear to be extended
[Mon Jun  4 12:12:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 13:19:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun  4 13:19:33 2012] Initial guess for spatial extent in simple fitting = 6.00"
[Mon Jun  4 13:19:33 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.849
[Mon Jun  4 13:19:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.00"
[Mon Jun  4 13:46:19 2012] fullrun_mos2_xmm0037980501_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun  4 13:46:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037980501_pi300-10000_cl_pass1_src1.csv
[Mon Jun  4 13:46:19 2012] fullrun_mos2_xmm0037980501_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun  4 13:46:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037980501_pi300-10000_cl_pass1_src1.csv
[Mon Jun  4 13:46:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037980501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037980501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 13:46:19 2012] fullrun_mos2_xmm0037980501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun  4 13:46:19 2012] fullrun_mos2_xmm0037980501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun  4 13:46:19 2012] Fit fullrun_mos2_xmm0037980501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jun  4 13:46:36 2012] Spatial fit model total counts = 181.298000, observed total counts = 174.000000
[Mon Jun  4 13:46:36 2012] Offset between fit and detection position for source 1 = 0.031216 pixels
[Mon Jun  4 13:46:36 2012] 181.419600 total counts/ 65.507600 bgd. counts: snr = 14.321304
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.031216 pixels
  Position = (358.6, 207.0) = 2 27 47.97 -3 57 38.4
  Extent = 5.9 (5.0-6.8)", rotation angle = 0
  Source counts = 115.9 +/- 13.5
  Background counts = 65.5
  Rate = 0.007 +/- 0.0008
[Mon Jun  4 13:46:36 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 13:46:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 13:46:36 2012] Assessing source extent using major axis lower bound
[Mon Jun  4 13:46:36 2012] Source does appear to be extended
[Mon Jun  4 13:46:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 14:32:12 2012] XMMSAS src. selection expression = ellipse(31149.104000, 17962.849000, 355.451410, 355.451410, 0.000000, X, Y)
[Mon Jun  4 14:32:12 2012] Writing source region out to fullrun_mos2_xmm0037980501_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun  4 14:32:12 2012] Extracting stamp from image fullrun_mos2_xmm0037980501_pi300-10000_cl_sm2.00.img.gz, (338, 187) - (379, 227)
[Mon Jun  4 14:32:12 2012] XMMSAS bgd. selection expression = annulus(31149.104000, 17962.849000, 592.419017, 1184.838034, X, Y)
[Mon Jun  4 14:32:12 2012] Writing fullrun_mos2_xmm0037980501_pi300-10000_pass1_cl_src1.gif
[Mon Jun  4 14:32:15 2012] Mean detx,y = (-6362.88, -7429.59) 
[Mon Jun  4 14:32:17 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  4 14:32:37 2012] Binned source spectrum to 10 counts/bin
[Mon Jun  4 14:32:37 2012] Setting source spectrum file to fullrun_mos2_xmm0037980501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun  4 14:32:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0037980501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun  4 14:44:21 2012] Updating aperture counts using extracted products
[Mon Jun  4 14:44:22 2012] Error reading totcts from fullrun_mos2_xmm0037980501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun  4 14:44:22 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 14:44:22 2012] Using photon index=1.80, rate=0.00714, arf fullrun_mos2_xmm0037980501_pi300-10000_pass1_cl_src1.arf
[Mon Jun  4 14:44:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 14:44:22 2012] Updating source flux to 1.2e-13
[Mon Jun  4 14:44:36 2012] Reading fit data from xmm0037980501/analysis//spectral/fullrun_mos2_xmm0037980501_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jun  4 14:44:36 2012] Spectral fit parameter nH value = 5.84834e+20
[Mon Jun  4 14:44:36 2012] Spectral fit parameter PhoIndex value = 2.18247
[Mon Jun  4 14:44:36 2012] Failed to get F(0.3-8.0) from xmm0037980501/analysis//spectral/fullrun_mos2_xmm0037980501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jun  4 14:44:36 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 14:44:36 2012] Using Nh = 5.8e+20, photon index=2.18, rate=0.00714, arf fullrun_mos2_xmm0037980501_pi300-10000_pass1_cl_src1.arf
[Mon Jun  4 14:44:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 14:44:36 2012] Updating source flux to 1.1e-13