[Fri Jun  8 03:12:13 2012] Detection parameters:
  Position = (426.9, 153.1) = 2 23 28.24 -4 1 33.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.5 +/- 8.1
  Background counts = 5.6
  Rate = 0.003 +/- 0.0006

[Fri Jun  8 03:12:13 2012] Off-axis axis estimate = 14.06'
[Fri Jun  8 03:27:13 2012] Using EEF radius (= 13.46 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 03:27:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  8 03:27:13 2012] Initial guess for spatial extent in simple fitting = 13.46"
[Fri Jun  8 03:27:13 2012] source mask rpix=3.1, npix_max = 51, mask sum = 64, frac = 1.238
[Fri Jun  8 03:27:13 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 13.46"
[Fri Jun  8 03:38:29 2012] fullrun_mos1_xmm0037980201_pi300-10000_cl_pass0_src7.ximg exists
[Fri Jun  8 03:38:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037980201_pi300-10000_cl_pass0_src7.csv
[Fri Jun  8 03:38:29 2012] fullrun_mos1_xmm0037980201_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Jun  8 03:38:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037980201_pi300-10000_cl_pass0_src7.csv
[Fri Jun  8 03:38:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037980201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037980201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 03:38:29 2012] fullrun_mos1_xmm0037980201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Jun  8 03:38:29 2012] fullrun_mos1_xmm0037980201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Jun  8 03:38:29 2012] Fit fullrun_mos1_xmm0037980201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Jun  8 03:46:15 2012] Spatial fit model total counts = 94.751500, observed total counts = 88.000000
[Fri Jun  8 03:46:15 2012] Offset between fit and detection position for source 3 = 0.319469 pixels
[Fri Jun  8 03:46:15 2012] 97.554900 total counts/ 72.395600 bgd. counts: snr = 2.956940
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.319469 pixels
  Position = (426.7, 152.9) = 2 23 28.30 -4 1 33.3
  Extent = 6.9 (4.6-10.8)", rotation angle = 0
  Source counts = 25.2 +/- 9.9
  Background counts = 72.4
  Rate = 0.002 +/- 0.0007
[Fri Jun  8 03:46:15 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 03:46:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 03:46:15 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 03:46:15 2012] Source does appear to be extended
[Fri Jun  8 03:46:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 04:00:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  8 04:00:08 2012] Initial guess for spatial extent in simple fitting = 6.88"
[Fri Jun  8 04:00:08 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.923
[Fri Jun  8 04:00:08 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 6.88"
[Fri Jun  8 04:10:01 2012] fullrun_mos1_xmm0037980201_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jun  8 04:10:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037980201_pi300-10000_cl_pass1_src7.csv
[Fri Jun  8 04:10:01 2012] fullrun_mos1_xmm0037980201_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jun  8 04:10:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037980201_pi300-10000_cl_pass1_src7.csv
[Fri Jun  8 04:10:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037980201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037980201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 04:10:01 2012] fullrun_mos1_xmm0037980201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jun  8 04:10:01 2012] fullrun_mos1_xmm0037980201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jun  8 04:10:01 2012] Fit fullrun_mos1_xmm0037980201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Jun  8 04:16:41 2012] Spatial fit model total counts = 75.703300, observed total counts = 74.000000
[Fri Jun  8 04:16:41 2012] Offset between fit and detection position for source 3 = 0.071580 pixels
[Fri Jun  8 04:16:41 2012] 78.080900 total counts/ 52.483200 bgd. counts: snr = 3.533384
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.071580 pixels
  Position = (426.7, 152.8) = 2 23 28.31 -4 1 33.6
  Extent = 6.9 (4.6-12.8)", rotation angle = 0
  Source counts = 25.6 +/- 8.8
  Background counts = 52.5
  Rate = 0.002 +/- 0.0007
[Fri Jun  8 04:16:41 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 04:16:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 04:16:41 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 04:16:41 2012] Source does appear to be extended
[Fri Jun  8 04:16:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 04:23:10 2012] XMMSAS src. selection expression = ellipse(37072.568800, 13245.176800, 414.865610, 414.865610, 0.000000, X, Y)
[Fri Jun  8 04:23:10 2012] Writing source region out to fullrun_mos1_xmm0037980201_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun  8 04:23:10 2012] Extracting stamp from image fullrun_mos1_xmm0037980201_pi300-10000_cl_sm2.00.img.gz, (403, 129) - (451, 177)
[Fri Jun  8 04:23:10 2012] XMMSAS bgd. selection expression = annulus(37072.568800, 13245.176800, 691.442684, 1382.885368, X, Y)
[Fri Jun  8 04:23:10 2012] Writing fullrun_mos1_xmm0037980201_pi300-10000_pass1_cl_src3.gif
[Fri Jun  8 04:25:02 2012] Mean detx,y = (-9150.21, 13620.41) 
[Fri Jun  8 04:25:03 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  8 04:25:12 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  8 04:25:12 2012] Setting source spectrum file to fullrun_mos1_xmm0037980201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun  8 04:25:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0037980201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jun  8 04:26:36 2012] Not generating rmf since there are only 25 counts
[Fri Jun  8 04:26:36 2012] rmf not generated due to insufficient counts
[Fri Jun  8 04:28:06 2012] Updating aperture counts using extracted products
[Fri Jun  8 04:28:06 2012] Error reading totcts from fullrun_mos1_xmm0037980201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun  8 04:28:06 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 04:28:06 2012] Using photon index=1.80, rate=0.00191, arf fullrun_mos1_xmm0037980201_pi300-10000_pass1_cl_src3.arf
[Fri Jun  8 04:28:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 04:28:06 2012] Updating source flux to 5.3e-14
[Fri Jun  8 04:28:07 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun  8 04:28:08 2012] xmm0037980201/analysis//spectral/fullrun_mos1_xmm0037980201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete