[Fri Jun  8 03:12:13 2012] Detection parameters:
  Position = (342.5, 220.0) = 2 23 52.79 -3 56 42.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.2 +/- 8.7
  Background counts = 5.4
  Rate = 0.005 +/- 0.001

[Fri Jun  8 03:12:13 2012] Off-axis axis estimate = 6.52'
[Fri Jun  8 03:27:13 2012] Using EEF radius (= 9.69 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 03:27:13 2012] Initial guess for spatial extent in simple fitting = 9.69"
[Fri Jun  8 03:27:13 2012] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.807
[Fri Jun  8 03:27:13 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.69"
[Fri Jun  8 03:38:29 2012] fullrun_mos1_xmm0037980201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun  8 03:38:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037980201_pi300-10000_cl_pass0_src1.csv
[Fri Jun  8 03:38:29 2012] fullrun_mos1_xmm0037980201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun  8 03:38:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037980201_pi300-10000_cl_pass0_src1.csv
[Fri Jun  8 03:38:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037980201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037980201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 03:38:29 2012] fullrun_mos1_xmm0037980201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun  8 03:38:29 2012] fullrun_mos1_xmm0037980201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun  8 03:38:29 2012] Fit fullrun_mos1_xmm0037980201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun  8 03:46:15 2012] Spatial fit model total counts = 87.514500, observed total counts = 88.000000
[Fri Jun  8 03:46:15 2012] Offset between fit and detection position for source 10 = 0.276213 pixels
[Fri Jun  8 03:46:15 2012] 86.521900 total counts/ 52.669600 bgd. counts: snr = 4.664533
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.276213 pixels
  Position = (342.7, 220.0) = 2 23 52.71 -3 56 41.5
  Extent = 5.3 (3.8-7.0)", rotation angle = 0
  Source counts = 33.9 +/- 9.3
  Background counts = 52.7
  Rate = 0.003 +/- 0.0007
[Fri Jun  8 03:46:15 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 03:46:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 03:46:15 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 03:46:15 2012] Source does appear to be extended
[Fri Jun  8 03:46:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 04:00:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  8 04:00:08 2012] Initial guess for spatial extent in simple fitting = 5.31"
[Fri Jun  8 04:00:08 2012] source mask rpix=1.2, npix_max = 11, mask sum = 10, frac = 0.845
[Fri Jun  8 04:00:08 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.31"
[Fri Jun  8 04:10:01 2012] fullrun_mos1_xmm0037980201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun  8 04:10:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037980201_pi300-10000_cl_pass1_src1.csv
[Fri Jun  8 04:10:01 2012] fullrun_mos1_xmm0037980201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun  8 04:10:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0037980201_pi300-10000_cl_pass1_src1.csv
[Fri Jun  8 04:10:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0037980201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0037980201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 04:10:01 2012] fullrun_mos1_xmm0037980201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun  8 04:10:01 2012] fullrun_mos1_xmm0037980201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun  8 04:10:01 2012] Fit fullrun_mos1_xmm0037980201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun  8 04:16:41 2012] Spatial fit model total counts = 76.183600, observed total counts = 77.000000
[Fri Jun  8 04:16:41 2012] Offset between fit and detection position for source 10 = 0.005953 pixels
[Fri Jun  8 04:16:41 2012] 75.560000 total counts/ 41.606500 bgd. counts: snr = 5.263855
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.005953 pixels
  Position = (342.7, 219.9) = 2 23 52.71 -3 56 41.5
  Extent = 5.3 (3.8-7.0)", rotation angle = 0
  Source counts = 34.0 +/- 8.7
  Background counts = 41.6
  Rate = 0.003 +/- 0.0006
[Fri Jun  8 04:16:41 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 04:16:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 04:16:41 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 04:16:41 2012] Source does appear to be extended
[Fri Jun  8 04:16:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 04:23:10 2012] XMMSAS src. selection expression = ellipse(29770.247600, 19086.845600, 318.955809, 318.955809, 0.000000, X, Y)
[Fri Jun  8 04:23:10 2012] Writing source region out to fullrun_mos1_xmm0037980201_pi300-10000_pass1_cl_src10_src.reg
[Fri Jun  8 04:23:10 2012] Extracting stamp from image fullrun_mos1_xmm0037980201_pi300-10000_cl_sm2.00.img.gz, (324, 202) - (361, 238)
[Fri Jun  8 04:23:10 2012] XMMSAS bgd. selection expression = annulus(29770.247600, 19086.845600, 531.593015, 1063.186031, X, Y)
[Fri Jun  8 04:23:10 2012] Writing fullrun_mos1_xmm0037980201_pi300-10000_pass1_cl_src10.gif
[Fri Jun  8 04:23:12 2012] Mean detx,y = (-6366.74, 4694.64) 
[Fri Jun  8 04:23:12 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  8 04:23:28 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  8 04:23:29 2012] Setting source spectrum file to fullrun_mos1_xmm0037980201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jun  8 04:23:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0037980201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Jun  8 04:25:56 2012] Not generating rmf since there are only 33 counts
[Fri Jun  8 04:25:56 2012] rmf not generated due to insufficient counts
[Fri Jun  8 04:28:06 2012] Updating aperture counts using extracted products
[Fri Jun  8 04:28:06 2012] Error reading totcts from fullrun_mos1_xmm0037980201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jun  8 04:28:06 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 04:28:06 2012] Using photon index=1.80, rate=0.00254, arf fullrun_mos1_xmm0037980201_pi300-10000_pass1_cl_src10.arf
[Fri Jun  8 04:28:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 04:28:06 2012] Updating source flux to 6e-14
[Fri Jun  8 04:28:07 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun  8 04:28:08 2012] xmm0037980201/analysis//spectral/fullrun_mos1_xmm0037980201_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete