[Sat Jun  9 10:07:28 2012] Detection parameters:
  Position = (294.0, 275.0) = 13 15 23.99 -16 23 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11982.6 +/- 138.1
  Background counts = 421.2
  Rate = 0.7 +/- 0.008

[Sat Jun  9 10:07:30 2012] Off-axis axis estimate = 1.73'
[Sat Jun  9 10:13:18 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 10:13:18 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jun  9 10:13:18 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Sat Jun  9 10:13:18 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.29"
[Sat Jun  9 12:28:03 2012] fullrun_pn_xmm0037950101_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jun  9 12:28:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037950101_pi300-10000_cl_pass0_src3.csv
[Sat Jun  9 12:28:03 2012] fullrun_pn_xmm0037950101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jun  9 12:28:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037950101_pi300-10000_cl_pass0_src3.csv
[Sat Jun  9 12:28:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037950101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037950101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 12:28:04 2012] fullrun_pn_xmm0037950101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun  9 12:28:04 2012] fullrun_pn_xmm0037950101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun  9 12:28:04 2012] Fit fullrun_pn_xmm0037950101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Jun  9 15:31:14 2012] Spatial fit model total counts = 21870.300000, observed total counts = 15871.000000
[Sat Jun  9 15:31:14 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  9 15:31:14 2012] Spatial fit model total counts = 40139.400000, observed total counts = 42282.000000
[Sat Jun  9 15:31:14 2012] Offset between fit and detection position for source 3 = 0.346487 pixels
[Sat Jun  9 15:31:14 2012] 39815.100000 total counts/ 25600.000000 bgd. counts: snr = 88.844375
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.346487 pixels
  Position = (294.3, 275.0) = 13 15 23.89 -16 23 8.5
  Extent = 14.6 (14.6-29.2)", rotation angle = 0
  Source counts = 14215.1 +/- 199.5
  Background counts = 25600.0
  Rate = 0.7 +/- 0.01
[Sat Jun  9 15:31:14 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 15:31:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 15:31:14 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 15:31:14 2012] Source does appear to be extended
[Sat Jun  9 15:31:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 15:31:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  9 15:31:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  9 15:31:47 2012] Initial guess for spatial extent in simple fitting = 14.59"
[Sat Jun  9 15:31:47 2012] source mask rpix=3.4, npix_max = 59, mask sum = 64, frac = 1.078
[Sat Jun  9 15:31:47 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 14.59"
[Sat Jun  9 17:21:54 2012] fullrun_pn_xmm0037950101_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jun  9 17:21:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037950101_pi300-10000_cl_pass1_src3.csv
[Sat Jun  9 17:21:54 2012] fullrun_pn_xmm0037950101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jun  9 17:21:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0037950101_pi300-10000_cl_pass1_src3.csv
[Sat Jun  9 17:21:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0037950101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0037950101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 17:21:54 2012] fullrun_pn_xmm0037950101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jun  9 17:21:54 2012] fullrun_pn_xmm0037950101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jun  9 17:21:54 2012] Fit fullrun_pn_xmm0037950101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Jun  9 19:10:19 2012] Spatial fit model total counts = 63209.000000, observed total counts = 59919.000000
[Sat Jun  9 19:10:19 2012] Offset between fit and detection position for source 3 = 0.213599 pixels
[Sat Jun  9 19:10:19 2012] 62824.100000 total counts/ 42155.300000 bgd. counts: snr = 100.667474
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.213599 pixels
  Position = (294.5, 274.9) = 13 15 23.83 -16 23 8.8
  Extent = 20.4 (19.5-21.7)", rotation angle = 0
  Source counts = 20668.8 +/- 250.6
  Background counts = 42155.3
  Rate = 1 +/- 0.01
[Sat Jun  9 19:10:19 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 19:10:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 19:10:19 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 19:10:19 2012] Source does appear to be extended
[Sat Jun  9 19:10:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 19:10:45 2012] Counts = 20668.800000, rescaling region sizes by 3.000000
[Sat Jun  9 19:10:45 2012] XMMSAS src. selection expression = ellipse(25573.708028, 23869.869400, 3664.728105, 3664.728105, 0.000000, X, Y)
[Sat Jun  9 19:10:45 2012] Writing source region out to fullrun_pn_xmm0037950101_pi300-10000_pass1_cl_src3_src.reg
[Sat Jun  9 19:10:45 2012] Extracting stamp from image fullrun_pn_xmm0037950101_pi300-10000_cl_sm2.00.img.gz, (84, 64) - (505, 486)
[Sat Jun  9 19:10:45 2012] XMMSAS bgd. selection expression = annulus(25573.708028, 23869.869400, 18323.640527, 36647.281055, X, Y) && !ellipse(25155.703735, 22322.790131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26085.256042, 22723.885406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40045.516907, 31366.183655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24817.334600, 25582.624000, 1111.752032, 1111.752032, 0.000000, X, Y) && !ellipse(27578.794983, 25285.370056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27845.890930, 24744.909637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23267.898254, 21085.172119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24717.642487, 22110.085114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23257.657806, 18769.904266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16075.713400, 16667.484000, 499.928014, 499.928014, 0.000000, X, Y) && !ellipse(15226.735809, 15810.349747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18799.537048, 34215.077881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24388.988000, 26417.908000, 1181.184034, 1181.184034, 0.000000, X, Y) && !ellipse(23828.964000, 27402.196000, 2362.368068, 2362.368068, 0.000000, X, Y) && !ellipse(29004.912000, 27113.374000, 2573.392074, 2573.392074, 0.000000, X, Y) && !ellipse(26978.123810, 26947.999847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26389.166626, 26474.982483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27226.000000, 26315.362122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27750.092163, 25966.395691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23305.554535, 25350.739532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15965.888000, 21788.829224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27378.231415, 16635.665604, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  9 19:10:45 2012] Writing fullrun_pn_xmm0037950101_pi300-10000_pass1_cl_src3.gif
[Sat Jun  9 19:19:18 2012] Mean detx,y = (319.18, -201.19) 
[Sat Jun  9 19:19:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 19:27:52 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 19:27:53 2012] Setting source spectrum file to fullrun_pn_xmm0037950101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun  9 19:27:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0037950101_pi300-10000_pass1_cl_src3_bgd.pi.gz