[Sat Jun  9 10:09:09 2012] Detection parameters:
  Position = (375.8, 106.9) = 13 14 59.24 -16 35 23.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.1 +/- 10.3
  Background counts = 7.5
  Rate = 0.002 +/- 0.0004

[Sat Jun  9 10:09:09 2012] Off-axis axis estimate = 14.98'
[Sat Jun  9 13:54:00 2012] Using EEF radius (= 13.92 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 13:54:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  9 13:54:00 2012] Initial guess for spatial extent in simple fitting = 13.92"
[Sat Jun  9 13:54:00 2012] source mask rpix=3.2, npix_max = 54, mask sum = 55, frac = 1.005
[Sat Jun  9 13:54:00 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 13.92"
[Sat Jun  9 15:30:59 2012] fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_src33.ximg exists
[Sat Jun  9 15:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_src33.csv
[Sat Jun  9 15:30:59 2012] fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_src33_1.ximg exists
[Sat Jun  9 15:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_src33.csv
[Sat Jun  9 15:30:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 15:30:59 2012] fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sat Jun  9 15:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sat Jun  9 15:30:59 2012] fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sat Jun  9 15:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sat Jun  9 15:30:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 15:31:31 2012] Spatial fit model total counts = 159.834000, observed total counts = 138.000000
[Sat Jun  9 15:31:31 2012] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  9 15:31:31 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 15:31:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 15:31:31 2012] Assessing source extent using major
[Sat Jun  9 15:31:31 2012] Source does appear to be extended
[Sat Jun  9 15:31:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 15:31:31 2012] Deleting source due to low Poisson probability 0.9