[Sat Jun  9 10:09:07 2012] Detection parameters:
  Position = (293.7, 275.0) = 13 15 24.06 -16 23 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4037.3 +/- 80.6
  Background counts = 173.2
  Rate = 0.2 +/- 0.004

[Sat Jun  9 10:09:09 2012] Off-axis axis estimate = 1.73'
[Sat Jun  9 13:54:00 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 13:54:00 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jun  9 13:54:00 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Sat Jun  9 13:54:00 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Jun  9 15:30:58 2012] fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun  9 15:30:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_src1.csv
[Sat Jun  9 15:30:58 2012] fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun  9 15:30:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_src1.csv
[Sat Jun  9 15:30:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 15:30:59 2012] fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun  9 15:30:59 2012] fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun  9 15:30:59 2012] Fit fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun  9 15:31:31 2012] Spatial fit model total counts = 15637.900000, observed total counts = 14420.000000
[Sat Jun  9 15:31:31 2012] Offset between fit and detection position for source 2 = 0.418973 pixels
[Sat Jun  9 15:31:31 2012] 15526.720000 total counts/ 12891.700000 bgd. counts: snr = 23.207525
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.418973 pixels
  Position = (293.9, 275.4) = 13 15 24.01 -16 23 6.6
  Extent = 12.6 (11.0-14.1)", rotation angle = 0
  Source counts = 2635.0 +/- 124.6
  Background counts = 12891.7
  Rate = 0.1 +/- 0.005
[Sat Jun  9 15:31:31 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 15:31:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 15:31:31 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 15:31:31 2012] Source does appear to be extended
[Sat Jun  9 15:31:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 17:55:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  9 17:55:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  9 17:55:02 2012] Initial guess for spatial extent in simple fitting = 12.58"
[Sat Jun  9 17:55:02 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.913
[Sat Jun  9 17:55:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.58"
[Sat Jun  9 19:10:08 2012] fullrun_mos2_xmm0037950101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun  9 19:10:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037950101_pi300-10000_cl_pass1_src1.csv
[Sat Jun  9 19:10:08 2012] fullrun_mos2_xmm0037950101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun  9 19:10:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037950101_pi300-10000_cl_pass1_src1.csv
[Sat Jun  9 19:10:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037950101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037950101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 19:10:08 2012] fullrun_mos2_xmm0037950101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun  9 19:10:08 2012] fullrun_mos2_xmm0037950101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun  9 19:10:08 2012] Fit fullrun_mos2_xmm0037950101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun  9 19:10:31 2012] Warning, spatial fit 1 centroid is now closest to src. 1
[Sat Jun  9 19:10:31 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 19:10:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 19:10:31 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 19:10:31 2012] Source does appear to be extended
[Sat Jun  9 19:10:31 2012] Computing asymmetry using major and minor axis, asym = 1.00