[Sat Jun  9 10:09:08 2012] Detection parameters:
  Position = (175.5, 182.3) = 13 15 59.83 -16 29 50.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 197.1 +/- 17.9
  Background counts = 13.5
  Rate = 0.009 +/- 0.0008

[Sat Jun  9 10:09:09 2012] Off-axis axis estimate = 12.26'
[Sat Jun  9 13:54:00 2012] Using EEF radius (= 12.56 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 13:54:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  9 13:54:00 2012] Initial guess for spatial extent in simple fitting = 12.56"
[Sat Jun  9 13:54:00 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.067
[Sat Jun  9 13:54:00 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 12.56"
[Sat Jun  9 15:30:58 2012] fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_src12.ximg exists
[Sat Jun  9 15:30:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_src12.csv
[Sat Jun  9 15:30:58 2012] fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_src12_1.ximg exists
[Sat Jun  9 15:30:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_src12.csv
[Sat Jun  9 15:30:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 15:30:59 2012] fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sat Jun  9 15:30:59 2012] fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Jun  9 15:30:59 2012] Fit fullrun_mos2_xmm0037950101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sat Jun  9 15:31:31 2012] Source 15 is offset by 1.895728 and 0.857181 pixels which is larger than
2 X fitted extent = 1.389605 x 1.389605, not incorporating fit results
[Sat Jun  9 15:31:31 2012] Spatial fit model total counts = 327.903000, observed total counts = 323.000000
[Sat Jun  9 15:31:31 2012] Offset between fit and detection position for source 15 = 0.297559 pixels
[Sat Jun  9 15:31:31 2012] 329.565000 total counts/ 193.720000 bgd. counts: snr = 9.760149
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.297559 pixels
  Position = (175.7, 182.4) = 13 15 59.76 -16 29 50.9
  Extent = 5.5 (4.6-6.5)", rotation angle = 0
  Source counts = 135.8 +/- 18.2
  Background counts = 193.7
  Rate = 0.006 +/- 0.0008
[Sat Jun  9 15:31:31 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 15:31:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 15:31:31 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 15:31:31 2012] Source does appear to be extended
[Sat Jun  9 15:31:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 17:55:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  9 17:55:02 2012] Initial guess for spatial extent in simple fitting = 5.46"
[Sat Jun  9 17:55:02 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.730
[Sat Jun  9 17:55:02 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 5.46"
[Sat Jun  9 19:10:08 2012] fullrun_mos2_xmm0037950101_pi300-10000_cl_pass1_src13.ximg exists
[Sat Jun  9 19:10:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037950101_pi300-10000_cl_pass1_src13.csv
[Sat Jun  9 19:10:08 2012] fullrun_mos2_xmm0037950101_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat Jun  9 19:10:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0037950101_pi300-10000_cl_pass1_src13.csv
[Sat Jun  9 19:10:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0037950101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0037950101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 19:10:08 2012] fullrun_mos2_xmm0037950101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat Jun  9 19:10:08 2012] fullrun_mos2_xmm0037950101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Jun  9 19:10:08 2012] Fit fullrun_mos2_xmm0037950101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Jun  9 19:10:31 2012] Spatial fit model total counts = 297.454000, observed total counts = 296.000000
[Sat Jun  9 19:10:31 2012] Offset between fit and detection position for source 15 = 0.015800 pixels
[Sat Jun  9 19:10:31 2012] 299.037000 total counts/ 169.641000 bgd. counts: snr = 9.934716
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.015800 pixels
  Position = (175.7, 182.5) = 13 15 59.76 -16 29 50.8
  Extent = 5.2 (4.5-6.2)", rotation angle = 0
  Source counts = 129.4 +/- 17.3
  Background counts = 169.6
  Rate = 0.006 +/- 0.0008
[Sat Jun  9 19:10:32 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 19:10:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 19:10:32 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 19:10:32 2012] Source does appear to be extended
[Sat Jun  9 19:10:32 2012] Computing asymmetry using major and minor axis, asym = 1.00