[Fri May  3 11:43:16 2013] Detection parameters:
  Position = (364.8, 419.0) = 3 38 15.02 0 29 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1201.4 +/- 40.9
  Background counts = 41.9
  Rate = 0.06 +/- 0.002

[Fri May  3 11:43:17 2013] Off-axis axis estimate = 9.97'
[Fri May  3 11:45:36 2013] Using EEF radius (= 11.42 ")to estimate initial spatial extent for simple fitting
[Fri May  3 11:45:36 2013] Initial guess for spatial extent in simple fitting = 11.42"
[Fri May  3 11:45:36 2013] source mask rpix=2.6, npix_max = 39, mask sum = 31, frac = 0.794
[Fri May  3 11:45:36 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 11.42"
[Fri May  3 12:32:51 2013] fullrun_pn_xmm0036540101_pi300-10000_cl_pass0_src4.ximg exists
[Fri May  3 12:32:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0036540101_pi300-10000_cl_pass0_src4.csv
[Fri May  3 12:32:52 2013] fullrun_pn_xmm0036540101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri May  3 12:32:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0036540101_pi300-10000_cl_pass0_src4.csv
[Fri May  3 12:32:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0036540101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0036540101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 12:32:52 2013] fullrun_pn_xmm0036540101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri May  3 12:32:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0036540101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri May  3 12:32:52 2013] fullrun_pn_xmm0036540101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri May  3 12:32:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0036540101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri May  3 12:32:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0036540101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0036540101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 13:34:59 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.700603 pixels away
[Fri May  3 13:34:59 2013] Vigneting correction estimate = 1.000000
[Fri May  3 13:34:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 13:34:59 2013] Assessing source extent using major
[Fri May  3 13:34:59 2013] Source does appear to be extended
[Fri May  3 13:34:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 13:35:16 2013] Using EEF radius (= 11.42 ")to estimate initial spatial extent for simple fitting
[Fri May  3 13:35:16 2013] Initial guess for spatial extent in simple fitting = 11.42"
[Fri May  3 13:35:16 2013] source mask rpix=2.6, npix_max = 39, mask sum = 31, frac = 0.794
[Fri May  3 13:35:16 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 11.42"
[Fri May  3 14:21:16 2013] fullrun_pn_xmm0036540101_pi300-10000_cl_pass1_src4.ximg exists
[Fri May  3 14:21:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0036540101_pi300-10000_cl_pass1_src4.csv
[Fri May  3 14:21:16 2013] fullrun_pn_xmm0036540101_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri May  3 14:21:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0036540101_pi300-10000_cl_pass1_src4.csv
[Fri May  3 14:21:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0036540101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0036540101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 14:21:16 2013] fullrun_pn_xmm0036540101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri May  3 14:21:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0036540101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri May  3 14:21:16 2013] fullrun_pn_xmm0036540101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri May  3 14:21:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0036540101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri May  3 14:21:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0036540101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0036540101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 15:12:38 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.700603 pixels away
[Fri May  3 15:12:38 2013] Vigneting correction estimate = 1.000000
[Fri May  3 15:12:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 15:12:38 2013] Assessing source extent using major
[Fri May  3 15:12:38 2013] Source does appear to be extended
[Fri May  3 15:12:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 15:12:53 2013] Counts = 1201.403931, rescaling region sizes by 2.000000
[Fri May  3 15:12:53 2013] XMMSAS src. selection expression = ellipse(31685.158875, 36401.367065, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri May  3 15:12:53 2013] Writing source region out to fullrun_pn_xmm0036540101_pi300-10000_pass1_cl_src5_src.reg
[Fri May  3 15:12:53 2013] Extracting stamp from image fullrun_pn_xmm0036540101_pi300-10000_cl_sm2.00.img.gz, (290, 344) - (440, 494)
[Fri May  3 15:12:53 2013] XMMSAS bgd. selection expression = annulus(31685.158875, 36401.367065, 4350.000000, 8700.000000, X, Y) && !ellipse(33120.489600, 29182.128400, 465.908813, 378.771211, 90.310639, X, Y) && !ellipse(40530.261000, 36235.662000, 2002.624058, 750.260822, 75.607800, X, Y) && !ellipse(22439.696381, 34277.986145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35623.799255, 33888.780090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27810.593520, 31352.697000, 452.295213, 334.569610, 4.026370, X, Y) && !ellipse(31103.526917, 29425.628052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37961.549896, 36568.063080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36656.698578, 37949.711121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40606.744965, 35474.491028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40823.297400, 34988.292200, 2195.312063, 424.631212, 65.066200, X, Y) && !ellipse(36809.536000, 34523.822000, 1912.064055, 1912.064055, 0.000000, X, Y) && !ellipse(27355.079559, 30600.045746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26021.484894, 29718.830902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38440.134857, 27730.644073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29064.177673, 41433.430817, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 15:12:53 2013] Writing fullrun_pn_xmm0036540101_pi300-10000_pass1_cl_src5.gif
[Fri May  3 15:14:52 2013] Mean detx,y = (2695.13, -9835.60) 
[Fri May  3 15:14:55 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 15:16:52 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 15:16:52 2013] Setting source spectrum file to fullrun_pn_xmm0036540101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri May  3 15:16:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0036540101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri May  3 15:33:55 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  3 15:33:55 2013] rmf not generated due to insufficient counts
[Fri May  3 16:11:12 2013] Updating aperture counts using extracted products
[Fri May  3 16:11:12 2013] Total counts from fullrun_pn_xmm0036540101_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 1853.00
[Fri May  3 16:11:13 2013] Total counts from fullrun_pn_xmm0036540101_pi300-10000_pass1_cl_src5_bgd.pi.gz = 19443.00
[Fri May  3 16:11:13 2013] Got source and background scale factors 4694828.000000, 113511518.000000
[Fri May  3 16:11:13 2013] User source parameters:
  Position = (364.8, 419.0) = 3 38 15.02 0 29 25.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1048.8 +/- 44.1
  Background aperture counts = 804.2
  Rate = 0.06 +/- 0.002

[Fri May  3 16:11:13 2013] Updating counts from extracted products
[Fri May  3 16:11:13 2013] Set source signif. to 1048.84/28.36 = 36.99
[Fri May  3 16:11:18 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 16:11:18 2013] Using photon index=1.80, rate=0.0586, arf fullrun_pn_xmm0036540101_pi300-10000_pass1_cl_src5.arf
[Fri May  3 16:11:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  3 16:11:18 2013] Updating source flux to 2.8e-13
[Fri May  3 16:11:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May  3 16:11:34 2013] xmm0036540101/analysis//spectral/fullrun_pn_xmm0036540101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete