[Fri May  3 11:44:02 2013] Detection parameters:
  Position = (194.4, 415.9) = 3 39 4.42 0 29 12.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.5 +/- 8.4
  Background counts = 10.3
  Rate = 0.002 +/- 0.0004

[Fri May  3 11:44:03 2013] Off-axis axis estimate = 11.38'
[Fri May  3 12:57:34 2013] Using EEF radius (= 12.12 ")to estimate initial spatial extent for simple fitting
[Fri May  3 12:57:34 2013] Initial guess for spatial extent in simple fitting = 12.12"
[Fri May  3 12:57:34 2013] source mask rpix=2.8, npix_max = 43, mask sum = 33, frac = 0.764
[Fri May  3 12:57:34 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 12.12"
[Fri May  3 13:34:52 2013] fullrun_mos2_xmm0036540101_pi300-10000_cl_pass0_src28.ximg exists
[Fri May  3 13:34:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036540101_pi300-10000_cl_pass0_src28.csv
[Fri May  3 13:34:52 2013] fullrun_mos2_xmm0036540101_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri May  3 13:34:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036540101_pi300-10000_cl_pass0_src28.csv
[Fri May  3 13:34:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036540101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036540101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 13:34:52 2013] fullrun_mos2_xmm0036540101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri May  3 13:34:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036540101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri May  3 13:34:52 2013] fullrun_mos2_xmm0036540101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri May  3 13:34:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036540101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri May  3 13:34:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036540101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036540101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 13:35:07 2013] Spatial fit model total counts = 148.949000, observed total counts = 127.000000
[Fri May  3 13:35:07 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 13:35:07 2013] Vigneting correction estimate = 1.000000
[Fri May  3 13:35:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 13:35:07 2013] Assessing source extent using major
[Fri May  3 13:35:07 2013] Source does appear to be extended
[Fri May  3 13:35:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 14:43:38 2013] Using EEF radius (= 12.12 ")to estimate initial spatial extent for simple fitting
[Fri May  3 14:43:38 2013] Initial guess for spatial extent in simple fitting = 12.12"
[Fri May  3 14:43:38 2013] source mask rpix=2.8, npix_max = 43, mask sum = 33, frac = 0.764
[Fri May  3 14:43:38 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 12.12"
[Fri May  3 15:12:32 2013] fullrun_mos2_xmm0036540101_pi300-10000_cl_pass1_src26.ximg exists
[Fri May  3 15:12:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036540101_pi300-10000_cl_pass1_src26.csv
[Fri May  3 15:12:32 2013] fullrun_mos2_xmm0036540101_pi300-10000_cl_pass1_src26_1.ximg exists
[Fri May  3 15:12:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036540101_pi300-10000_cl_pass1_src26.csv
[Fri May  3 15:12:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036540101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036540101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 15:12:32 2013] fullrun_mos2_xmm0036540101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Fri May  3 15:12:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036540101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Fri May  3 15:12:32 2013] fullrun_mos2_xmm0036540101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Fri May  3 15:12:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036540101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Fri May  3 15:12:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036540101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036540101_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 15:12:44 2013] Spatial fit model total counts = 148.949000, observed total counts = 127.000000
[Fri May  3 15:12:44 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 15:12:44 2013] Vigneting correction estimate = 1.000000
[Fri May  3 15:12:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 15:12:44 2013] Assessing source extent using major
[Fri May  3 15:12:44 2013] Source does appear to be extended
[Fri May  3 15:12:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 16:00:48 2013] XMMSAS src. selection expression = ellipse(16864.397705, 36137.643005, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  3 16:00:48 2013] Writing source region out to fullrun_mos2_xmm0036540101_pi300-10000_pass1_cl_src4_src.reg
[Fri May  3 16:00:48 2013] Extracting stamp from image fullrun_mos2_xmm0036540101_pi300-10000_cl_sm2.00.img.gz, (157, 378) - (232, 453)
[Fri May  3 16:00:48 2013] XMMSAS bgd. selection expression = annulus(16864.397705, 36137.643005, 1087.500000, 2175.000000, X, Y) && !ellipse(17269.219320, 34377.757000, 524.242415, 524.242415, 0.000000, X, Y)
[Fri May  3 16:00:48 2013] Writing fullrun_mos2_xmm0036540101_pi300-10000_pass1_cl_src4.gif
[Fri May  3 16:05:17 2013] Mean detx,y = (12011.64, 6711.13) 
[Fri May  3 16:05:18 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 16:05:29 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 16:05:29 2013] Setting source spectrum file to fullrun_mos2_xmm0036540101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri May  3 16:05:29 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0036540101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri May  3 16:10:27 2013] Not generating rmf since there are only 36 counts
[Fri May  3 16:10:27 2013] rmf not generated due to insufficient counts
[Fri May  3 16:11:24 2013] Updating aperture counts using extracted products
[Fri May  3 16:11:24 2013] Total counts from fullrun_mos2_xmm0036540101_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 87.00
[Fri May  3 16:11:24 2013] Total counts from fullrun_mos2_xmm0036540101_pi300-10000_pass1_cl_src4_bgd.pi.gz = 385.00
[Fri May  3 16:11:24 2013] Got source and background scale factors 1049676.000000, 7569172.000000
[Fri May  3 16:11:24 2013] User source parameters:
  Position = (194.4, 415.9) = 3 39 4.42 0 29 12.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 33.6 +/- 10.4
  Background aperture counts = 53.4
  Rate = 0.002 +/- 0.0005

[Fri May  3 16:11:24 2013] Updating counts from extracted products
[Fri May  3 16:11:24 2013] Set source signif. to 33.61/7.31 = 4.60
[Fri May  3 16:11:25 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 16:11:25 2013] Using photon index=1.80, rate=0.00155, arf fullrun_mos2_xmm0036540101_pi300-10000_pass1_cl_src4.arf
[Fri May  3 16:11:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  3 16:11:25 2013] Updating source flux to 5.3e-14
[Fri May  3 16:11:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May  3 16:11:29 2013] xmm0036540101/analysis//spectral/fullrun_mos2_xmm0036540101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete