[Thu Aug 30 14:18:38 2012] Detection parameters:
  Position = (271.7, 300.8) = 13 26 50.69 -62 6 14.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 178.1 +/- 21.7
  Background counts = 83.7
  Rate = 0.004 +/- 0.0005

[Thu Aug 30 14:18:39 2012] Off-axis axis estimate = 1.95'
[Thu Aug 30 14:34:04 2012] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 14:34:04 2012] Initial guess for spatial extent in simple fitting = 7.40"
[Thu Aug 30 14:34:04 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.774
[Thu Aug 30 14:34:04 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.40"
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src12.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src12.csv
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src12.csv
[Thu Aug 30 15:52:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Aug 30 15:52:10 2012] Fit fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Thu Aug 30 15:52:19 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 10.011331 pixels away
[Thu Aug 30 15:52:19 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 15:52:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 15:52:19 2012] Assessing source extent using major
[Thu Aug 30 15:52:19 2012] Source does appear to be extended
[Thu Aug 30 15:52:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 16:06:25 2012] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 16:06:25 2012] Initial guess for spatial extent in simple fitting = 7.40"
[Thu Aug 30 16:06:25 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.774
[Thu Aug 30 16:06:25 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 7.40"
[Thu Aug 30 17:53:21 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src12.ximg exists
[Thu Aug 30 17:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src12.csv
[Thu Aug 30 17:53:21 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src12_1.ximg exists
[Thu Aug 30 17:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src12.csv
[Thu Aug 30 17:53:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 17:53:21 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Thu Aug 30 17:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Thu Aug 30 17:53:21 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Aug 30 17:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Thu Aug 30 17:53:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 17:53:27 2012] Spatial fit model total counts = 1425.430000, observed total counts = 2044.000000
[Thu Aug 30 17:53:27 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug 30 17:53:27 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 17:53:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 17:53:27 2012] Assessing source extent using major
[Thu Aug 30 17:53:27 2012] Source does appear to be extended
[Thu Aug 30 17:53:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 17:53:27 2012] Source is confused with source 7
[Thu Aug 30 17:56:37 2012] XMMSAS src. selection expression = ellipse(23590.322357, 26121.736145, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 30 17:56:37 2012] Writing source region out to fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src5_src.reg
[Thu Aug 30 17:56:37 2012] Extracting stamp from image fullrun_mos2_xmm0036140201_pi300-10000_cl_sm2.00.img.gz, (234, 263) - (309, 338)
[Thu Aug 30 17:56:37 2012] XMMSAS bgd. selection expression = annulus(23590.322357, 26121.736145, 1087.500000, 2175.000000, X, Y) && !ellipse(25497.320600, 23907.623400, 2399.128869, 2399.128869, 0.000000, X, Y) && !ellipse(24652.902252, 23683.320068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23680.270000, 24165.562000, 2622.048075, 2622.048075, 0.000000, X, Y) && !ellipse(25806.961182, 26561.401031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26289.087952, 26565.088867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24007.076996, 27095.019440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22464.414000, 24439.825600, 1311.424038, 1311.424038, 0.000000, X, Y) && !ellipse(23118.373800, 28699.432000, 2529.744073, 689.139220, 63.099000, X, Y) && !ellipse(22548.064000, 23157.064000, 1264.872036, 1264.872036, 0.000000, X, Y)
[Thu Aug 30 17:56:37 2012] Writing fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src5.gif
[Thu Aug 30 18:14:42 2012] Mean detx,y = (-810.04, -2754.96) 
[Thu Aug 30 18:14:42 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 30 18:14:48 2012] grppha failed
[Thu Aug 30 18:14:48 2012] Setting source spectrum file to fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src5_src.pi.gz
[Thu Aug 30 18:14:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Aug 30 18:17:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 30 18:17:04 2012] rmf not generated due to insufficient counts
[Thu Aug 30 18:17:36 2012] Updating aperture counts using extracted products
[Thu Aug 30 18:17:36 2012] Error reading totcts from fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src5_src.pi.gz
[Thu Aug 30 18:17:36 2012] No arf file for this source, not re-computing flux
[Thu Aug 30 18:17:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug 30 18:17:39 2012] xmm0036140201/analysis//spectral/fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete