[Thu Aug 30 14:18:38 2012] Detection parameters:
  Position = (208.6, 129.8) = 13 27 30.19 -62 18 40.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.0 +/- 11.9
  Background counts = 17.9
  Rate = 0.001 +/- 0.0002

[Thu Aug 30 14:18:39 2012] Off-axis axis estimate = 13.85'
[Thu Aug 30 14:34:04 2012] Using EEF radius (= 13.35 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 14:34:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 30 14:34:04 2012] Initial guess for spatial extent in simple fitting = 13.35"
[Thu Aug 30 14:34:04 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.961
[Thu Aug 30 14:34:04 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 13.35"
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src45.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src45.csv
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src45_1.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src45.csv
[Thu Aug 30 15:52:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 15:52:11 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Thu Aug 30 15:52:11 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Thu Aug 30 15:52:11 2012] Fit fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Thu Aug 30 15:52:19 2012] Spatial fit model total counts = 334.266000, observed total counts = 331.000000
[Thu Aug 30 15:52:19 2012] Offset between fit and detection position for source 49 = 0.169256 pixels
[Thu Aug 30 15:52:19 2012] 332.113000 total counts/ 303.669000 bgd. counts: snr = 1.632264
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 0.169256 pixels
  Position = (208.5, 130.0) = 13 27 30.26 -62 18 39.9
  Extent = 3.4 (3.3-5.7)", rotation angle = 0
  Source counts = 28.4 +/- 18.2
  Background counts = 303.7
  Rate = 0.0006 +/- 0.0004
  Deleting source due to low Poisson probability