[Thu Aug 30 14:18:38 2012] Detection parameters:
  Position = (322.4, 215.1) = 13 26 19.20 -62 12 34.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.5 +/- 14.2
  Background counts = 36.1
  Rate = 0.002 +/- 0.0004

[Thu Aug 30 14:18:39 2012] Off-axis axis estimate = 6.29'
[Thu Aug 30 14:34:04 2012] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 14:34:04 2012] Initial guess for spatial extent in simple fitting = 9.57"
[Thu Aug 30 14:34:04 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.028
[Thu Aug 30 14:34:04 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 9.57"
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src26.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src26.csv
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src26_1.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src26.csv
[Thu Aug 30 15:52:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu Aug 30 15:52:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 15:52:19 2012] Source 47 is offset by -0.245990 and 1.547383 pixels which is larger than
2 X fitted extent = 1.095485 x 1.095485, not incorporating fit results
[Thu Aug 30 15:52:19 2012] Warning, spatial fit 26 centroid is now closest to src. 12
[Thu Aug 30 15:52:19 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 15:52:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 15:52:19 2012] Assessing source extent using major
[Thu Aug 30 15:52:19 2012] Source does appear to be extended
[Thu Aug 30 15:52:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 15:52:19 2012] Deleting source due to low Poisson probability 0.9