[Thu Aug 30 14:18:38 2012] Detection parameters:
  Position = (318.9, 221.9) = 13 26 21.38 -62 12 1.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.2 +/- 13.3
  Background counts = 41.2
  Rate = 0.002 +/- 0.0003

[Thu Aug 30 14:18:39 2012] Off-axis axis estimate = 5.74'
[Thu Aug 30 14:34:04 2012] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 14:34:04 2012] Initial guess for spatial extent in simple fitting = 9.30"
[Thu Aug 30 14:34:04 2012] source mask rpix=2.1, npix_max = 27, mask sum = 35, frac = 1.257
[Thu Aug 30 14:34:04 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 9.30"
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src35.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src35.csv
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src35_1.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src35.csv
[Thu Aug 30 15:52:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src35.csv
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src35.csv
[Thu Aug 30 15:52:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 15:52:19 2012] Spatial fit model total counts = 943.792000, observed total counts = 801.000000
[Thu Aug 30 15:52:19 2012] Poor agreement between spatial fit and data for source 46
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug 30 15:52:19 2012] Source 46 is offset by -7.080001 and -4.597957 pixels which is larger than
2 X fitted extent = 0.888432 x 0.888432, not incorporating fit results
[Thu Aug 30 15:52:19 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 15:52:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 15:52:19 2012] Assessing source extent using major
[Thu Aug 30 15:52:19 2012] Source does appear to be extended
[Thu Aug 30 15:52:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 15:52:19 2012] Deleting source due to low Poisson probability 0.9