[Thu Aug 30 14:18:38 2012] Detection parameters:
  Position = (312.0, 238.0) = 13 26 25.72 -62 10 49.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.4 +/- 18.6
  Background counts = 60.5
  Rate = 0.003 +/- 0.0004

[Thu Aug 30 14:18:39 2012] Off-axis axis estimate = 4.49'
[Thu Aug 30 14:34:04 2012] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 14:34:04 2012] Initial guess for spatial extent in simple fitting = 8.67"
[Thu Aug 30 14:34:04 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.005
[Thu Aug 30 14:34:04 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 8.67"
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src19.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src19.csv
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src19.csv
[Thu Aug 30 15:52:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu Aug 30 15:52:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 15:52:19 2012] Warning, spatial fit 19 centroid is now closest to src. 45
[Thu Aug 30 15:52:19 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 15:52:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 15:52:19 2012] Assessing source extent using major
[Thu Aug 30 15:52:19 2012] Source does appear to be extended
[Thu Aug 30 15:52:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 16:06:25 2012] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 16:06:25 2012] Initial guess for spatial extent in simple fitting = 8.67"
[Thu Aug 30 16:06:25 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.005
[Thu Aug 30 16:06:25 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 8.67"
[Thu Aug 30 17:53:21 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src18.ximg exists
[Thu Aug 30 17:53:21 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src18_1.ximg exists
[Thu Aug 30 17:53:21 2012] Fit fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src18 appears to have run properly
[Thu Aug 30 17:53:22 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Thu Aug 30 17:53:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Thu Aug 30 17:53:22 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Thu Aug 30 17:53:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Thu Aug 30 17:53:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 17:53:27 2012] Source 44 is offset by -1.063969 and 3.767098 pixels which is larger than
2 X fitted extent = 7.974667 x 3.627596, not incorporating fit results
[Thu Aug 30 17:53:27 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 17:53:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 17:53:27 2012] Assessing source extent using major
[Thu Aug 30 17:53:27 2012] Source does appear to be extended
[Thu Aug 30 17:53:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 17:56:37 2012] XMMSAS src. selection expression = ellipse(27092.916656, 20660.501511, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 30 17:56:37 2012] Writing source region out to fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src44_src.reg
[Thu Aug 30 17:56:37 2012] Extracting stamp from image fullrun_mos2_xmm0036140201_pi300-10000_cl_sm2.00.img.gz, (274, 201) - (349, 276)
[Thu Aug 30 17:56:37 2012] XMMSAS bgd. selection expression = annulus(27092.916656, 20660.501511, 1087.500000, 2175.000000, X, Y) && !ellipse(25497.320600, 23907.623400, 2399.128869, 2399.128869, 0.000000, X, Y) && !ellipse(24652.902252, 23683.320068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25372.521393, 22575.203766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28679.671021, 19002.459610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23680.270000, 24165.562000, 2622.048075, 2622.048075, 0.000000, X, Y) && !ellipse(27913.490631, 23636.267639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28251.874115, 22698.681213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23970.827400, 20975.352000, 1343.760039, 1343.760039, 0.000000, X, Y)
[Thu Aug 30 17:56:37 2012] Writing fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src44.gif
[Thu Aug 30 18:15:46 2012] Mean detx,y = (7.09, 3590.17) 
[Thu Aug 30 18:15:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 30 18:15:54 2012] grppha failed
[Thu Aug 30 18:15:54 2012] Setting source spectrum file to fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src44_src.pi.gz
[Thu Aug 30 18:15:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Thu Aug 30 18:17:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 30 18:17:05 2012] rmf not generated due to insufficient counts
[Thu Aug 30 18:17:36 2012] Updating aperture counts using extracted products
[Thu Aug 30 18:17:36 2012] Error reading totcts from fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src44_src.pi.gz
[Thu Aug 30 18:17:36 2012] No arf file for this source, not re-computing flux
[Thu Aug 30 18:17:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug 30 18:17:39 2012] xmm0036140201/analysis//spectral/fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete