[Thu Aug 30 14:18:38 2012] Detection parameters:
  Position = (269.4, 255.1) = 13 26 52.16 -62 9 36.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.2 +/- 20.9
  Background counts = 79.6
  Rate = 0.003 +/- 0.0004

[Thu Aug 30 14:18:39 2012] Off-axis axis estimate = 3.78'
[Thu Aug 30 14:34:04 2012] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 14:34:04 2012] Initial guess for spatial extent in simple fitting = 8.32"
[Thu Aug 30 14:34:04 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.074
[Thu Aug 30 14:34:04 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 8.32"
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src22.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src22.csv
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src22.csv
[Thu Aug 30 15:52:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu Aug 30 15:52:10 2012] Fit fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Thu Aug 30 15:52:19 2012] Source 42 is offset by -7.250239 and -5.666271 pixels which is larger than
2 X fitted extent = 4.689196 x 4.689196, not incorporating fit results
[Thu Aug 30 15:52:19 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 15.034478 pixels away
[Thu Aug 30 15:52:19 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 15:52:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 15:52:19 2012] Assessing source extent using major
[Thu Aug 30 15:52:19 2012] Source does appear to be extended
[Thu Aug 30 15:52:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 16:06:25 2012] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 16:06:25 2012] Initial guess for spatial extent in simple fitting = 8.32"
[Thu Aug 30 16:06:25 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.074
[Thu Aug 30 16:06:25 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 8.32"
[Thu Aug 30 17:53:21 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src19.ximg exists
[Thu Aug 30 17:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src19.csv
[Thu Aug 30 17:53:21 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src19_1.ximg exists
[Thu Aug 30 17:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src19.csv
[Thu Aug 30 17:53:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 17:53:22 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Thu Aug 30 17:53:22 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Aug 30 17:53:22 2012] Fit fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Thu Aug 30 17:53:27 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 28.112198 pixels away
[Thu Aug 30 17:53:27 2012] Spatial fit model total counts = 1984.990000, observed total counts = 1985.000000
[Thu Aug 30 17:53:27 2012] Offset between fit and detection position for source 42 = 5.230442 pixels
[Thu Aug 30 17:53:27 2012] 2031.164000 total counts/ 1859.750000 bgd. counts: snr = 3.974834
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 5.230442 pixels
  Position = (265.6, 251.5) = 13 26 54.53 -62 9 51.8
  Extent = 16.1 (14.9-16.6)", rotation angle = 0
  Source counts = 171.4 +/- 45.1
  Background counts = 1859.8
  Rate = 0.003 +/- 0.0009
[Thu Aug 30 17:53:27 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 17:53:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 17:53:27 2012] Assessing source extent using major axis lower bound
[Thu Aug 30 17:53:27 2012] Source does appear to be extended
[Thu Aug 30 17:53:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 17:56:37 2012] XMMSAS src. selection expression = ellipse(23058.090000, 21834.600000, 963.552028, 963.552028, 0.000000, X, Y)
[Thu Aug 30 17:56:37 2012] Writing source region out to fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src42_src.reg
[Thu Aug 30 17:56:37 2012] Extracting stamp from image fullrun_mos2_xmm0036140201_pi300-10000_cl_sm2.00.img.gz, (210, 196) - (321, 307)
[Thu Aug 30 17:56:37 2012] XMMSAS bgd. selection expression = annulus(23058.090000, 21834.600000, 1605.920046, 3211.840092, X, Y) && !ellipse(25497.320600, 23907.623400, 2399.128869, 2399.128869, 0.000000, X, Y) && !ellipse(24652.902252, 23683.320068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25372.521393, 22575.203766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23680.270000, 24165.562000, 2622.048075, 2622.048075, 0.000000, X, Y) && !ellipse(21751.768600, 19648.557600, 383.976011, 383.976011, 0.000000, X, Y) && !ellipse(23970.827400, 20975.352000, 1343.760039, 1343.760039, 0.000000, X, Y) && !ellipse(27092.916656, 20660.501511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22464.414000, 24439.825600, 1311.424038, 1311.424038, 0.000000, X, Y) && !ellipse(22548.064000, 23157.064000, 1264.872036, 1264.872036, 0.000000, X, Y)
[Thu Aug 30 17:56:37 2012] Writing fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src42.gif
[Thu Aug 30 18:15:58 2012] Mean detx,y = (-2976.20, 776.26) 
[Thu Aug 30 18:15:58 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 30 18:16:05 2012] grppha failed
[Thu Aug 30 18:16:05 2012] Setting source spectrum file to fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src42_src.pi.gz
[Thu Aug 30 18:16:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Thu Aug 30 18:17:36 2012] Updating aperture counts using extracted products
[Thu Aug 30 18:17:36 2012] Error reading totcts from fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src42_src.pi.gz
[Thu Aug 30 18:17:36 2012] No arf file for this source, not re-computing flux
[Thu Aug 30 18:17:38 2012] Flag b found in src. 42 procflags, skipping spectral fitting
[Thu Aug 30 18:17:38 2012] Source 42 has no response, skipping
[Thu Aug 30 18:17:39 2012] xmm0036140201/analysis//spectral/fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete