[Thu Aug 30 14:18:38 2012] Detection parameters:
  Position = (262.7, 261.1) = 13 26 56.31 -62 9 12.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.1 +/- 18.4
  Background counts = 78.5
  Rate = 0.002 +/- 0.0004

[Thu Aug 30 14:18:39 2012] Off-axis axis estimate = 3.75'
[Thu Aug 30 14:34:04 2012] Using EEF radius (= 8.30 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 14:34:04 2012] Initial guess for spatial extent in simple fitting = 8.30"
[Thu Aug 30 14:34:04 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.862
[Thu Aug 30 14:34:04 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 8.30"
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src33.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src33.csv
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src33_1.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src33.csv
[Thu Aug 30 15:52:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Thu Aug 30 15:52:10 2012] Fit fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Thu Aug 30 15:52:19 2012] Spatial fit model total counts = 4022.400000, observed total counts = 4026.000000
[Thu Aug 30 15:52:19 2012] Offset between fit and detection position for source 41 = 6.396571 pixels
[Thu Aug 30 15:52:19 2012] Warning, changing simple spatial fit ID from 33 to 8
[Thu Aug 30 15:52:19 2012] 4250.068000 total counts/ 4089.190000 bgd. counts: snr = 2.515811
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 6.396571 pixels
  Position = (259.7, 266.7) = 13 26 58.15 -62 8 45.6
  Extent = 15.8 (15.8-31.6)", rotation angle = 0
  Source counts = 160.9 +/- 65.2
  Background counts = 4089.2
  Rate = 0.003 +/- 0.001
[Thu Aug 30 15:52:19 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 15:52:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 15:52:19 2012] Assessing source extent using major axis lower bound
[Thu Aug 30 15:52:19 2012] Source does appear to be extended
[Thu Aug 30 15:52:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 15:52:19 2012] Source is confused with source 7
[Thu Aug 30 16:06:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 30 16:06:25 2012] Initial guess for spatial extent in simple fitting = 15.81"
[Thu Aug 30 16:06:25 2012] source mask rpix=3.6, npix_max = 68, mask sum = 64, frac = 0.936
[Thu Aug 30 16:06:25 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 15.81"
[Thu Aug 30 17:53:21 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src24.ximg exists
[Thu Aug 30 17:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src24.csv
[Thu Aug 30 17:53:21 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src24_1.ximg exists
[Thu Aug 30 17:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src24.csv
[Thu Aug 30 17:53:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 17:53:22 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Thu Aug 30 17:53:22 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Thu Aug 30 17:53:22 2012] Fit fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Thu Aug 30 17:53:27 2012] Warning, spatial fit 24 centroid is now closest to src. 2
[Thu Aug 30 17:53:27 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 17:53:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 17:53:27 2012] Assessing source extent using major axis lower bound
[Thu Aug 30 17:53:27 2012] Source does appear to be extended
[Thu Aug 30 17:53:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 17:56:38 2012] XMMSAS src. selection expression = ellipse(22548.064000, 23157.064000, 948.654027, 948.654027, 0.000000, X, Y)
[Thu Aug 30 17:56:38 2012] Writing source region out to fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src41_src.reg
[Thu Aug 30 17:56:38 2012] Extracting stamp from image fullrun_mos2_xmm0036140201_pi300-10000_cl_sm2.00.img.gz, (205, 212) - (314, 321)
[Thu Aug 30 17:56:38 2012] XMMSAS bgd. selection expression = annulus(22548.064000, 23157.064000, 1581.090045, 3162.180091, X, Y) && !ellipse(25497.320600, 23907.623400, 2399.128869, 2399.128869, 0.000000, X, Y) && !ellipse(24652.902252, 23683.320068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25372.521393, 22575.203766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23680.270000, 24165.562000, 2622.048075, 2622.048075, 0.000000, X, Y) && !ellipse(21751.768600, 19648.557600, 383.976011, 383.976011, 0.000000, X, Y) && !ellipse(23590.322357, 26121.736145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25806.961182, 26561.401031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23970.827400, 20975.352000, 1343.760039, 1343.760039, 0.000000, X, Y) && !ellipse(26289.087952, 26565.088867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24007.076996, 27095.019440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23058.090000, 21834.600000, 1284.736037, 1284.736037, 0.000000, X, Y) && !ellipse(22464.414000, 24439.825600, 1311.424038, 1311.424038, 0.000000, X, Y) && !ellipse(23118.373800, 28699.432000, 2529.744073, 689.139220, 63.099000, X, Y)
[Thu Aug 30 17:56:38 2012] Writing fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src41.gif
[Thu Aug 30 18:16:54 2012] Mean detx,y = (-2825.18, -580.89) 
[Thu Aug 30 18:16:55 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 30 18:17:02 2012] grppha failed
[Thu Aug 30 18:17:02 2012] Setting source spectrum file to fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src41_src.pi.gz
[Thu Aug 30 18:17:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Thu Aug 30 18:17:36 2012] Updating aperture counts using extracted products
[Thu Aug 30 18:17:36 2012] Error reading totcts from fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src41_src.pi.gz
[Thu Aug 30 18:17:36 2012] No arf file for this source, not re-computing flux
[Thu Aug 30 18:17:38 2012] Flag c found in src. 41 procflags, skipping spectral fitting
[Thu Aug 30 18:17:38 2012] Source 41 has no response, skipping
[Thu Aug 30 18:17:39 2012] xmm0036140201/analysis//spectral/fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src41_pl.csv not found, spectral fit skipped or did not complete