[Thu Aug 30 14:18:38 2012] Detection parameters:
  Position = (276.5, 312.0) = 13 26 47.72 -62 5 25.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.1 +/- 20.5
  Background counts = 77.1
  Rate = 0.003 +/- 0.0004

[Thu Aug 30 14:18:39 2012] Off-axis axis estimate = 1.87'
[Thu Aug 30 14:34:04 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 14:34:04 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Thu Aug 30 14:34:04 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.040
[Thu Aug 30 14:34:04 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 7.36"
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src18.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src18.csv
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src18.csv
[Thu Aug 30 15:52:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu Aug 30 15:52:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 15:52:19 2012] Source 32 is offset by -4.091345 and 5.765396 pixels which is larger than
2 X fitted extent = 4.111444 x 4.111444, not incorporating fit results
[Thu Aug 30 15:52:19 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 15:52:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 15:52:19 2012] Assessing source extent using major
[Thu Aug 30 15:52:19 2012] Source does appear to be extended
[Thu Aug 30 15:52:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 15:52:19 2012] Source is confused with source 28
[Thu Aug 30 16:06:25 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 16:06:25 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Thu Aug 30 16:06:25 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.040
[Thu Aug 30 16:06:25 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 7.36"
[Thu Aug 30 17:53:21 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src17.ximg exists
[Thu Aug 30 17:53:21 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu Aug 30 17:53:21 2012] Fit fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src17 appears to have run properly
[Thu Aug 30 17:53:22 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu Aug 30 17:53:22 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu Aug 30 17:53:22 2012] Fit fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Thu Aug 30 17:53:27 2012] Source 32 is offset by -4.093023 and 5.765396 pixels which is larger than
2 X fitted extent = 4.389081 x 4.389081, not incorporating fit results
[Thu Aug 30 17:53:27 2012] Spatial fit model total counts = 1216.460000, observed total counts = 1093.000000
[Thu Aug 30 17:53:27 2012] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug 30 17:53:27 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 17:53:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 17:53:27 2012] Assessing source extent using major
[Thu Aug 30 17:53:27 2012] Source does appear to be extended
[Thu Aug 30 17:53:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 17:56:37 2012] XMMSAS src. selection expression = ellipse(24007.076996, 27095.019440, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 30 17:56:37 2012] Writing source region out to fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src32_src.reg
[Thu Aug 30 17:56:37 2012] Extracting stamp from image fullrun_mos2_xmm0036140201_pi300-10000_cl_sm2.00.img.gz, (239, 274) - (314, 349)
[Thu Aug 30 17:56:37 2012] XMMSAS bgd. selection expression = annulus(24007.076996, 27095.019440, 1087.500000, 2175.000000, X, Y) && !ellipse(25497.320600, 23907.623400, 2399.128869, 2399.128869, 0.000000, X, Y) && !ellipse(23680.270000, 24165.562000, 2622.048075, 2622.048075, 0.000000, X, Y) && !ellipse(23590.322357, 26121.736145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25806.961182, 26561.401031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26289.087952, 26565.088867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22464.414000, 24439.825600, 1311.424038, 1311.424038, 0.000000, X, Y) && !ellipse(23118.373800, 28699.432000, 2529.744073, 689.139220, 63.099000, X, Y)
[Thu Aug 30 17:56:37 2012] Writing fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src32.gif
[Thu Aug 30 18:15:36 2012] Mean detx,y = (-22.16, -3461.95) 
[Thu Aug 30 18:15:37 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 30 18:15:42 2012] grppha failed
[Thu Aug 30 18:15:42 2012] Setting source spectrum file to fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src32_src.pi.gz
[Thu Aug 30 18:15:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Thu Aug 30 18:17:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 30 18:17:05 2012] rmf not generated due to insufficient counts
[Thu Aug 30 18:17:36 2012] Updating aperture counts using extracted products
[Thu Aug 30 18:17:36 2012] Error reading totcts from fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src32_src.pi.gz
[Thu Aug 30 18:17:36 2012] No arf file for this source, not re-computing flux
[Thu Aug 30 18:17:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug 30 18:17:39 2012] xmm0036140201/analysis//spectral/fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete