[Thu Aug 30 14:18:38 2012] Detection parameters:
  Position = (264.1, 337.1) = 13 26 55.41 -62 3 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.5 +/- 13.4
  Background counts = 51.2
  Rate = 0.001 +/- 0.0003

[Thu Aug 30 14:18:39 2012] Off-axis axis estimate = 3.75'
[Thu Aug 30 14:34:04 2012] Using EEF radius (= 8.30 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 14:34:04 2012] Initial guess for spatial extent in simple fitting = 8.30"
[Thu Aug 30 14:34:04 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.862
[Thu Aug 30 14:34:04 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 8.30"
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src46.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src46.csv
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src46_1.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src46.csv
[Thu Aug 30 15:52:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 15:52:11 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Thu Aug 30 15:52:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src46.csv
[Thu Aug 30 15:52:11 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Thu Aug 30 15:52:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src46.csv
[Thu Aug 30 15:52:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 15:52:19 2012] Source 23 is offset by -2.254019 and 6.748985 pixels which is larger than
2 X fitted extent = 6.682943 x 6.682943, not incorporating fit results
[Thu Aug 30 15:52:19 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 15:52:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 15:52:19 2012] Assessing source extent using major
[Thu Aug 30 15:52:19 2012] Source does appear to be extended
[Thu Aug 30 15:52:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 15:52:19 2012] Deleting source due to low Poisson probability 0.8