[Thu Aug 30 14:18:38 2012] Detection parameters:
  Position = (293.7, 275.1) = 13 26 37.08 -62 8 8.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 193322.0 +/- 505.3
  Background counts = 100.2
  Rate = 4 +/- 0.01

[Thu Aug 30 14:18:39 2012] Off-axis axis estimate = 1.72'
[Thu Aug 30 14:34:04 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 14:34:04 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Aug 30 14:34:04 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Thu Aug 30 14:34:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src1.csv
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug 30 15:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src1.csv
[Thu Aug 30 15:52:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug 30 15:52:10 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug 30 15:52:10 2012] Fit fullrun_mos2_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Aug 30 15:52:19 2012] Spatial fit model total counts = 225585.000000, observed total counts = 218437.000000
[Thu Aug 30 15:52:19 2012] Offset between fit and detection position for source 1 = 0.230552 pixels
[Thu Aug 30 15:52:19 2012] 214994.000000 total counts/ 25600.000000 bgd. counts: snr = 1183.712500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.230552 pixels
  Position = (293.6, 275.4) = 13 26 37.11 -62 8 8.2
  Extent = 9.9 (9.8-9.9)", rotation angle = 0
  Source counts = 189394.0 +/- 463.7
  Background counts = 25600.0
  Rate = 4 +/- 0.009
[Thu Aug 30 15:52:19 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 15:52:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 15:52:19 2012] Assessing source extent using major axis lower bound
[Thu Aug 30 15:52:19 2012] Source does appear to be extended
[Thu Aug 30 15:52:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 16:06:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 30 16:06:25 2012] Initial guess for spatial extent in simple fitting = 9.89"
[Thu Aug 30 16:06:25 2012] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.812
[Thu Aug 30 16:06:25 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.89"
[Thu Aug 30 17:53:21 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug 30 17:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src1.csv
[Thu Aug 30 17:53:21 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug 30 17:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src1.csv
[Thu Aug 30 17:53:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 17:53:21 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug 30 17:53:21 2012] fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug 30 17:53:21 2012] Fit fullrun_mos2_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug 30 17:53:27 2012] Spatial fit model total counts = 226809.000000, observed total counts = 227278.000000
[Thu Aug 30 17:53:27 2012] Offset between fit and detection position for source 1 = 0.003204 pixels
[Thu Aug 30 17:53:27 2012] 223326.000000 total counts/ 32400.000000 bgd. counts: snr = 1060.700000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.003204 pixels
  Position = (293.6, 275.4) = 13 26 37.11 -62 8 8.2
  Extent = 10.0 (9.9-10.0)", rotation angle = 0
  Source counts = 190926.0 +/- 472.6
  Background counts = 32400.0
  Rate = 4 +/- 0.009
[Thu Aug 30 17:53:27 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 17:53:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 17:53:27 2012] Assessing source extent using major axis lower bound
[Thu Aug 30 17:53:27 2012] Source does appear to be extended
[Thu Aug 30 17:53:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 17:53:27 2012] Source is confused with source 7
[Thu Aug 30 17:56:37 2012] Counts = 190926.000000, rescaling region sizes by 3.000000
[Thu Aug 30 17:56:37 2012] XMMSAS src. selection expression = ellipse(25497.320600, 23907.623400, 1799.346652, 1799.346652, 0.000000, X, Y)
[Thu Aug 30 17:56:37 2012] Writing source region out to fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src1_src.reg
[Thu Aug 30 17:56:37 2012] Extracting stamp from image fullrun_mos2_xmm0036140201_pi300-10000_cl_sm2.00.img.gz, (190, 172) - (397, 379)
[Thu Aug 30 17:56:37 2012] XMMSAS bgd. selection expression = annulus(25497.320600, 23907.623400, 8996.733259, 17993.466518, X, Y) && !ellipse(24652.902252, 23683.320068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25372.521393, 22575.203766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26999.160000, 35952.094820, 469.145613, 469.145613, 0.000000, X, Y) && !ellipse(34732.402374, 17868.555008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27721.554000, 24531.786000, 623.617618, 623.617618, 0.000000, X, Y) && !ellipse(28679.671021, 19002.459610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23680.270000, 24165.562000, 2622.048075, 2622.048075, 0.000000, X, Y) && !ellipse(22264.570648, 31418.538177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21751.768600, 19648.557600, 383.976011, 383.976011, 0.000000, X, Y) && !ellipse(27913.490631, 23636.267639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13095.067215, 28068.754089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23590.322357, 26121.736145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28251.874115, 22698.681213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25806.961182, 26561.401031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23970.827400, 20975.352000, 1343.760039, 1343.760039, 0.000000, X, Y) && !ellipse(26289.087952, 26565.088867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24007.076996, 27095.019440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27092.916656, 20660.501511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23058.090000, 21834.600000, 1284.736037, 1284.736037, 0.000000, X, Y) && !ellipse(22464.414000, 24439.825600, 1311.424038, 1311.424038, 0.000000, X, Y) && !ellipse(23118.373800, 28699.432000, 2529.744073, 689.139220, 63.099000, X, Y) && !ellipse(22548.064000, 23157.064000, 1264.872036, 1264.872036, 0.000000, X, Y)
[Thu Aug 30 17:56:37 2012] Writing fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src1.gif
[Thu Aug 30 17:56:53 2012] Mean detx,y = (-37.83, -15.00) 
[Thu Aug 30 17:56:56 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 30 18:02:28 2012] grppha failed
[Thu Aug 30 18:02:28 2012] Setting source spectrum file to fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Aug 30 18:02:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Aug 30 18:17:36 2012] Updating aperture counts using extracted products
[Thu Aug 30 18:17:36 2012] Error reading totcts from fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Aug 30 18:17:36 2012] No arf file for this source, not re-computing flux
[Thu Aug 30 18:17:38 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu Aug 30 18:17:38 2012] Source 1 has no response, skipping
[Thu Aug 30 18:17:39 2012] xmm0036140201/analysis//spectral/fullrun_mos2_xmm0036140201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete