[Thu Aug 30 14:18:18 2012] Detection parameters:
  Position = (184.9, 124.2) = 13 27 45.00 -62 19 4.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.1 +/- 11.4
  Background counts = 22.3
  Rate = 0.0009 +/- 0.0002

[Thu Aug 30 14:18:18 2012] Off-axis axis estimate = 15.08'
[Thu Aug 30 14:19:43 2012] Using EEF radius (= 13.97 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 14:19:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 30 14:19:43 2012] Initial guess for spatial extent in simple fitting = 13.97"
[Thu Aug 30 14:19:43 2012] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.162
[Thu Aug 30 14:19:43 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 13.97"
[Thu Aug 30 14:34:04 2012] fullrun_mos1_xmm0036140201_pi300-10000_cl_pass0_src11.ximg exists
[Thu Aug 30 14:34:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0036140201_pi300-10000_cl_pass0_src11.csv
[Thu Aug 30 14:34:04 2012] fullrun_mos1_xmm0036140201_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Aug 30 14:34:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0036140201_pi300-10000_cl_pass0_src11.csv
[Thu Aug 30 14:34:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0036140201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0036140201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 14:34:04 2012] fullrun_mos1_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Aug 30 14:34:04 2012] fullrun_mos1_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Aug 30 14:34:04 2012] Fit fullrun_mos1_xmm0036140201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Aug 30 15:52:13 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 12.718667 pixels away
[Thu Aug 30 15:52:13 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 15:52:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 15:52:13 2012] Assessing source extent using major
[Thu Aug 30 15:52:13 2012] Source does appear to be extended
[Thu Aug 30 15:52:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 15:52:23 2012] Using EEF radius (= 13.97 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 15:52:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 30 15:52:23 2012] Initial guess for spatial extent in simple fitting = 13.97"
[Thu Aug 30 15:52:23 2012] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.162
[Thu Aug 30 15:52:23 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 13.97"
[Thu Aug 30 16:06:25 2012] fullrun_mos1_xmm0036140201_pi300-10000_cl_pass1_src11.ximg exists
[Thu Aug 30 16:06:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0036140201_pi300-10000_cl_pass1_src11.csv
[Thu Aug 30 16:06:25 2012] fullrun_mos1_xmm0036140201_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Aug 30 16:06:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0036140201_pi300-10000_cl_pass1_src11.csv
[Thu Aug 30 16:06:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0036140201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0036140201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 16:06:25 2012] fullrun_mos1_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Aug 30 16:06:25 2012] fullrun_mos1_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Aug 30 16:06:25 2012] Fit fullrun_mos1_xmm0036140201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Aug 30 17:53:24 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 18.683914 pixels away
[Thu Aug 30 17:53:24 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 57.644125 pixels away
[Thu Aug 30 17:53:24 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 17:53:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 17:53:24 2012] Assessing source extent using major
[Thu Aug 30 17:53:24 2012] Source does appear to be extended
[Thu Aug 30 17:53:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 17:53:32 2012] XMMSAS src. selection expression = ellipse(16038.655716, 10754.714645, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 30 17:53:32 2012] Writing source region out to fullrun_mos1_xmm0036140201_pi300-10000_pass1_cl_src12_src.reg
[Thu Aug 30 17:53:32 2012] Extracting stamp from image fullrun_mos1_xmm0036140201_pi300-10000_cl_sm2.00.img.gz, (147, 87) - (222, 162)
[Thu Aug 30 17:53:32 2012] XMMSAS bgd. selection expression = annulus(16038.655716, 10754.714645, 1087.500000, 2175.000000, X, Y) && !ellipse(15608.401980, 11367.386800, 498.231214, 498.231214, 0.000000, X, Y)
[Thu Aug 30 17:53:32 2012] Writing fullrun_mos1_xmm0036140201_pi300-10000_pass1_cl_src12.gif
[Thu Aug 30 17:55:19 2012] Mean detx,y = (7962.21, 14148.05) 
[Thu Aug 30 17:55:20 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 30 17:55:29 2012] grppha failed
[Thu Aug 30 17:55:29 2012] Setting source spectrum file to fullrun_mos1_xmm0036140201_pi300-10000_pass1_cl_src12_src.pi.gz
[Thu Aug 30 17:55:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0036140201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Aug 30 17:56:37 2012] Not generating rmf since there are only 47 counts
[Thu Aug 30 17:56:37 2012] rmf not generated due to insufficient counts
[Thu Aug 30 18:17:36 2012] Updating aperture counts using extracted products
[Thu Aug 30 18:17:36 2012] Error reading totcts from fullrun_mos1_xmm0036140201_pi300-10000_pass1_cl_src12_src.pi.gz
[Thu Aug 30 18:17:36 2012] No arf file for this source, not re-computing flux
[Thu Aug 30 18:17:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug 30 18:17:38 2012] xmm0036140201/analysis//spectral/fullrun_mos1_xmm0036140201_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete