[Tue Mar 13 12:33:58 2012] Detection parameters:
  Position = (319.8, 430.7) = 13 39 49.91 -31 30 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.1 +/- 13.8
  Background counts = 32.8
  Rate = 0.004 +/- 0.0006

[Tue Mar 13 12:33:59 2012] Off-axis axis estimate = 9.71'
[Tue Mar 13 12:34:46 2012] Using EEF radius (= 11.28 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 12:34:46 2012] Initial guess for spatial extent in simple fitting = 11.28"
[Tue Mar 13 12:34:46 2012] source mask rpix=2.6, npix_max = 38, mask sum = 26, frac = 0.679
[Tue Mar 13 12:34:46 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.28"
[Tue Mar 13 12:34:46 2012] fullrun_mos1_xmm0035940301_pi300-10000_cl_pass0_src5.ximg exists
[Tue Mar 13 12:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0035940301_pi300-10000_cl_pass0_src5.csv
[Tue Mar 13 12:34:46 2012] fullrun_mos1_xmm0035940301_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Mar 13 12:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0035940301_pi300-10000_cl_pass0_src5.csv
[Tue Mar 13 12:34:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0035940301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0035940301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 12:34:47 2012] fullrun_mos1_xmm0035940301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Mar 13 12:34:47 2012] fullrun_mos1_xmm0035940301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Mar 13 12:34:47 2012] Fit fullrun_mos1_xmm0035940301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Mar 13 12:35:12 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.018697 pixels away
[Tue Mar 13 12:35:12 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 12:35:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 12:35:12 2012] Assessing source extent using major
[Tue Mar 13 12:35:12 2012] Source does appear to be extended
[Tue Mar 13 12:35:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 12:35:40 2012] Using EEF radius (= 11.28 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 12:35:40 2012] Initial guess for spatial extent in simple fitting = 11.28"
[Tue Mar 13 12:35:40 2012] source mask rpix=2.6, npix_max = 38, mask sum = 26, frac = 0.679
[Tue Mar 13 12:35:40 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.28"
[Tue Mar 13 12:35:41 2012] fullrun_mos1_xmm0035940301_pi300-10000_cl_pass1_src5.ximg exists
[Tue Mar 13 12:35:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0035940301_pi300-10000_cl_pass1_src5.csv
[Tue Mar 13 12:35:41 2012] fullrun_mos1_xmm0035940301_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Mar 13 12:35:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0035940301_pi300-10000_cl_pass1_src5.csv
[Tue Mar 13 12:35:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0035940301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0035940301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 12:35:41 2012] fullrun_mos1_xmm0035940301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Mar 13 12:35:41 2012] fullrun_mos1_xmm0035940301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Mar 13 12:35:41 2012] Fit fullrun_mos1_xmm0035940301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Mar 13 12:36:02 2012] Spatial fit model total counts = 297.710000, observed total counts = 298.000000
[Tue Mar 13 12:36:02 2012] Offset between fit and detection position for source 6 = 0.485533 pixels
[Tue Mar 13 12:36:02 2012] 287.912400 total counts/ 216.590000 bgd. counts: snr = 4.846260
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.485533 pixels
  Position = (319.3, 430.9) = 13 39 50.07 -31 30 33.4
  Extent = 6.6 (4.3-8.5)", rotation angle = 0
  Source counts = 71.3 +/- 17.0
  Background counts = 216.6
  Rate = 0.002 +/- 0.0004
[Tue Mar 13 12:36:02 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 12:36:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 12:36:02 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 12:36:02 2012] Source does appear to be extended
[Tue Mar 13 12:36:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 12:36:40 2012] XMMSAS src. selection expression = ellipse(27732.417400, 37439.981660, 395.421611, 395.421611, 0.000000, X, Y)
[Tue Mar 13 12:36:40 2012] Not overwriting source region fullrun_mos1_xmm0035940301_pi300-10000_pass1_cl_src6_src.reg
[Tue Mar 13 12:36:40 2012] Extracting stamp from image fullrun_mos1_xmm0035940301_pi300-10000_cl_sm2.00.img.gz, (297, 408) - (342, 454)
[Tue Mar 13 12:36:40 2012] XMMSAS bgd. selection expression = annulus(27732.417400, 37439.981660, 659.036019, 1318.072038, X, Y)
[Tue Mar 13 12:36:40 2012] Writing fullrun_mos1_xmm0035940301_pi300-10000_pass1_cl_src6.gif
[Tue Mar 13 12:36:41 2012] ../../xmm0035940301/products/events/fullrun_mos1_xmm0035940301_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0035940301/products/events/fullrun_mos1_xmm0035940301_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Tue Mar 13 12:36:41 2012] Mean detx,y = (7876.72, 5671.65) 
[Tue Mar 13 12:36:41 2012] ../../xmm0035940301/products/images/fullrun_mos1_xmm0035940301_pi300-10000_pass1_cl_src6_src.img and ../../xmm0035940301/products/images/fullrun_mos1_xmm0035940301_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Tue Mar 13 12:36:41 2012] ../../xmm0035940301/products/spectra/fullrun_mos1_xmm0035940301_pi300-10000_pass1_cl_src6_src_b10.pi.gz and ../../xmm0035940301/products/spectra/fullrun_mos1_xmm0035940301_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Tue Mar 13 12:36:41 2012] Setting source spectrum file to fullrun_mos1_xmm0035940301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Mar 13 12:36:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0035940301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Mar 13 12:36:41 2012] ../../xmm0035940301/products/lightcurves/fullrun_mos1_xmm0035940301_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0035940301/products/lightcurves/fullrun_mos1_xmm0035940301_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Tue Mar 13 12:36:46 2012] Not generating rmf since there are only 71 counts
[Tue Mar 13 12:36:46 2012] rmf not generated due to insufficient counts
[Tue Mar 13 12:36:46 2012] fullrun_mos1_xmm0035940301_pi300-10000_pass1_cl_src6.arf exists, delete to re-create
[Tue Mar 13 12:38:11 2012] Updating aperture counts using extracted products
[Tue Mar 13 12:38:11 2012] Error reading totcts from fullrun_mos1_xmm0035940301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Mar 13 12:38:12 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 12:38:12 2012] Using photon index=1.80, rate=0.00165, arf fullrun_mos1_xmm0035940301_pi300-10000_pass1_cl_src6.arf
[Tue Mar 13 12:38:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 12:38:12 2012] Updating source flux to 2.9e-14
[Tue Mar 13 12:38:21 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting