[Wed Oct  5 10:05:57 2011] Detection parameters:
  Position = (307.9, 191.6) = 12 15 36.11 36 13 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22.7 +/- 6.3
  Background counts = 2.6
  Rate = 0.002 +/- 0.0006

[Wed Oct  5 10:05:57 2011] Off-axis axis estimate = 7.77'
[Wed Oct  5 10:37:50 2011] Using EEF radius (= 10.32 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 10:37:50 2011] Initial guess for spatial extent in simple fitting = 10.32"
[Wed Oct  5 10:37:50 2011] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.910
[Wed Oct  5 10:37:50 2011] Giving source the simple spatial ID 35 for pass 0, mean size = 10.32"
[Wed Oct  5 13:04:07 2011] fullrun_mos1_xmm0035940201_pi300-10000_cl_pass0_src35.ximg exists
[Wed Oct  5 13:04:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0035940201_pi300-10000_cl_pass0_src35.csv
[Wed Oct  5 13:04:07 2011] fullrun_mos1_xmm0035940201_pi300-10000_cl_pass0_src35_1.ximg exists
[Wed Oct  5 13:04:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0035940201_pi300-10000_cl_pass0_src35.csv
[Wed Oct  5 13:04:07 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0035940201_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0035940201_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 13:04:07 2011] fullrun_mos1_xmm0035940201_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Wed Oct  5 13:04:07 2011] fullrun_mos1_xmm0035940201_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Wed Oct  5 13:04:07 2011] Fit fullrun_mos1_xmm0035940201_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Wed Oct  5 13:27:07 2011] Spatial fit model total counts = 100.484000, observed total counts = 99.000000
[Wed Oct  5 13:27:07 2011] Offset between fit and detection position for source 50 = 5.625108 pixels
[Wed Oct  5 13:27:07 2011] 91.870000 total counts/ 27.750000 bgd. counts: snr = 12.172002
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 5.625108 pixels
  Position = (312.9, 194.3) = 12 15 34.33 36 13 49.4
  Extent = 20.6 (17.3-41.3)", rotation angle = 0
  Source counts = 64.1 +/- 9.6
  Background counts = 27.8
  Rate = 0.004 +/- 0.0007
[Wed Oct  5 13:27:07 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 13:27:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 13:27:07 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 13:27:07 2011] Source does appear to be extended
[Wed Oct  5 13:27:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 13:27:07 2011] Source is confused with source 48
[Wed Oct  5 13:48:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 13:48:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 13:48:06 2011] Initial guess for spatial extent in simple fitting = 20.63"
[Wed Oct  5 13:48:06 2011] source mask rpix=4.7, npix_max = 109, mask sum = 79, frac = 0.719
[Wed Oct  5 13:48:06 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 20.63"
[Wed Oct  5 16:13:48 2011] fullrun_mos1_xmm0035940201_pi300-10000_cl_pass1_src29.ximg exists
[Wed Oct  5 16:13:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0035940201_pi300-10000_cl_pass1_src29.csv
[Wed Oct  5 16:13:48 2011] fullrun_mos1_xmm0035940201_pi300-10000_cl_pass1_src29_1.ximg exists
[Wed Oct  5 16:13:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0035940201_pi300-10000_cl_pass1_src29.csv
[Wed Oct  5 16:13:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0035940201_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0035940201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 16:13:49 2011] fullrun_mos1_xmm0035940201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Wed Oct  5 16:13:49 2011] fullrun_mos1_xmm0035940201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Wed Oct  5 16:13:49 2011] Fit fullrun_mos1_xmm0035940201_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Wed Oct  5 16:36:19 2011] Spatial fit model total counts = 282.120000, observed total counts = 282.000000
[Wed Oct  5 16:36:19 2011] Offset between fit and detection position for source 50 = 7.052289 pixels
[Wed Oct  5 16:36:19 2011] Warning, changing simple spatial fit ID from 29 to 22
[Wed Oct  5 16:36:19 2011] 250.603000 total counts/ 132.273000 bgd. counts: snr = 10.288671
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 7.052289 pixels
  Position = (306.6, 190.9) = 12 15 36.56 36 13 34.8
  Extent = 30.6 (26.2-35.2)", rotation angle = 0
  Source counts = 118.3 +/- 15.8
  Background counts = 132.3
  Rate = 0.008 +/- 0.001
[Wed Oct  5 16:36:19 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 16:36:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 16:36:19 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 16:36:19 2011] Source does appear to be extended
[Wed Oct  5 16:36:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 16:55:33 2011] XMMSAS src. selection expression = ellipse(26629.638000, 16560.084000, 1837.002053, 1837.002053, 0.000000, X, Y)
[Wed Oct  5 16:55:33 2011] Writing source region out to fullrun_mos1_xmm0035940201_pi300-10000_pass1_cl_src50_src.reg
[Wed Oct  5 16:55:33 2011] Extracting stamp from image fullrun_mos1_xmm0035940201_pi300-10000_cl_sm2.00.img.gz, (201, 85) - (412, 296)
[Wed Oct  5 16:55:33 2011] XMMSAS bgd. selection expression = annulus(26629.638000, 16560.084000, 3061.670088, 6123.340176, X, Y) && !ellipse(25662.318400, 16011.674200, 471.451214, 471.451214, 0.000000, X, Y) && !ellipse(25440.383942, 15334.660095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33530.210640, 23510.785800, 1561.416045, 1561.416045, 0.000000, X, Y) && !ellipse(28265.182400, 17815.771800, 653.838419, 653.838419, 0.000000, X, Y) && !ellipse(25632.151398, 17671.606262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27403.166600, 17407.814000, 1468.024042, 1468.024042, 0.000000, X, Y) && !ellipse(32828.687958, 23154.849762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29433.910000, 19520.886000, 1488.776043, 1488.776043, 0.000000, X, Y) && !ellipse(32246.105800, 21538.244000, 1476.376042, 1476.376042, 0.000000, X, Y) && !ellipse(25674.390259, 16659.246246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30310.680000, 20172.814000, 2083.224060, 2083.224060, 0.000000, X, Y) && !ellipse(29214.428000, 18839.804000, 1535.504044, 1535.504044, 0.000000, X, Y) && !ellipse(29038.097321, 9822.560410, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Oct  5 16:55:33 2011] Writing fullrun_mos1_xmm0035940201_pi300-10000_pass1_cl_src50.gif
[Wed Oct  5 17:02:27 2011] Mean detx,y = (5602.30, 4379.48) 
[Wed Oct  5 17:02:28 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 17:03:49 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 17:03:50 2011] Setting source spectrum file to fullrun_mos1_xmm0035940201_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Wed Oct  5 17:03:50 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0035940201_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Wed Oct  5 17:29:57 2011] Updating aperture counts using extracted products
[Wed Oct  5 17:29:57 2011] Error reading totcts from fullrun_mos1_xmm0035940201_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Wed Oct  5 17:29:58 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 17:29:58 2011] Using photon index=1.80, rate=0.00807, arf fullrun_mos1_xmm0035940201_pi300-10000_pass1_cl_src50.arf
[Wed Oct  5 17:29:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 17:29:58 2011] Updating source flux to 9.3e-14
[Wed Oct  5 17:29:59 2011] Flag c found in src. 50 procflags, skipping spectral fitting