[Wed Oct  5 10:05:57 2011] Detection parameters:
  Position = (316.7, 211.2) = 12 15 32.93 36 15 3.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22.8 +/- 6.8
  Background counts = 3.5
  Rate = 0.002 +/- 0.0006

[Wed Oct  5 10:05:57 2011] Off-axis axis estimate = 6.46'
[Wed Oct  5 10:37:50 2011] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 10:37:50 2011] Initial guess for spatial extent in simple fitting = 9.66"
[Wed Oct  5 10:37:50 2011] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.013
[Wed Oct  5 10:37:50 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 9.66"
[Wed Oct  5 13:04:07 2011] fullrun_mos1_xmm0035940201_pi300-10000_cl_pass0_src39.ximg exists
[Wed Oct  5 13:04:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0035940201_pi300-10000_cl_pass0_src39.csv
[Wed Oct  5 13:04:07 2011] fullrun_mos1_xmm0035940201_pi300-10000_cl_pass0_src39_1.ximg exists
[Wed Oct  5 13:04:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0035940201_pi300-10000_cl_pass0_src39.csv
[Wed Oct  5 13:04:07 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0035940201_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0035940201_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 13:04:07 2011] fullrun_mos1_xmm0035940201_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Wed Oct  5 13:04:07 2011] fullrun_mos1_xmm0035940201_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Wed Oct  5 13:04:07 2011] Fit fullrun_mos1_xmm0035940201_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Wed Oct  5 13:27:07 2011] Spatial fit model total counts = 139.831000, observed total counts = 139.000000
[Wed Oct  5 13:27:07 2011] Offset between fit and detection position for source 45 = 1.838841 pixels
[Wed Oct  5 13:27:07 2011] Warning, changing simple spatial fit ID from 39 to 28
[Wed Oct  5 13:27:07 2011] 131.013700 total counts/ 117.820000 bgd. counts: snr = 1.215506
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 1.838841 pixels
  Position = (315.2, 210.1) = 12 15 33.46 36 14 58.4
  Extent = 11.3 (3.5-19.0)", rotation angle = 0
  Source counts = 13.2 +/- 11.4
  Background counts = 117.8
  Rate = 0.0009 +/- 0.0008
  Deleting source due to low Poisson probability