[Sun Jul 29 12:23:43 2012] Detection parameters:
  Position = (318.2, 312.7) = 23 4 44.86 3 11 45.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2256.7 +/- 56.5
  Background counts = 8.8
  Rate = 0.3 +/- 0.006

[Sun Jul 29 12:23:44 2012] Off-axis axis estimate = 1.77'
[Sun Jul 29 12:26:05 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 12:26:05 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sun Jul 29 12:26:05 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Sun Jul 29 12:26:05 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Sun Jul 29 13:31:19 2012] fullrun_pn_xmm0033541001_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 29 13:31:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0033541001_pi300-10000_cl_pass0_src1.csv
[Sun Jul 29 13:31:19 2012] fullrun_pn_xmm0033541001_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 29 13:31:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0033541001_pi300-10000_cl_pass0_src1.csv
[Sun Jul 29 13:31:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0033541001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0033541001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 13:31:19 2012] fullrun_pn_xmm0033541001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 29 13:31:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0033541001_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jul 29 13:31:19 2012] fullrun_pn_xmm0033541001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 29 13:31:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0033541001_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jul 29 13:31:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0033541001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0033541001_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 14:37:38 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.330315 pixels away
[Sun Jul 29 14:37:39 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 14:37:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 14:37:39 2012] Assessing source extent using major
[Sun Jul 29 14:37:39 2012] Source does appear to be extended
[Sun Jul 29 14:37:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 14:38:01 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 14:38:01 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sun Jul 29 14:38:01 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Sun Jul 29 14:38:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.31"
[Sun Jul 29 15:30:49 2012] fullrun_pn_xmm0033541001_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 29 15:30:49 2012] fullrun_pn_xmm0033541001_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 29 15:30:49 2012] Fit fullrun_pn_xmm0033541001_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Jul 29 15:30:49 2012] fullrun_pn_xmm0033541001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 29 15:30:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0033541001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jul 29 15:30:49 2012] fullrun_pn_xmm0033541001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 29 15:30:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0033541001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jul 29 15:30:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0033541001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0033541001_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 16:29:20 2012] Spatial fit model total counts = 2125.230000, observed total counts = 2015.000000
[Sun Jul 29 16:29:20 2012] Offset between fit and detection position for source 1 = 0.284555 pixels
[Sun Jul 29 16:29:20 2012] 2131.883000 total counts/ 482.633000 bgd. counts: snr = 75.072000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.284555 pixels
  Position = (318.0, 312.5) = 23 4 44.91 3 11 44.9
  Extent = 5.8" x 5.5", rotation angle = 257
  Source counts = 1649.2 +/- 46.2
  Background counts = 482.6
  Rate = 0.2 +/- 0.005
[Sun Jul 29 16:29:21 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 16:29:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 16:29:21 2012] Assessing source extent using major
[Sun Jul 29 16:29:21 2012] Source does appear to be extended
[Sun Jul 29 16:29:21 2012] Computing asymmetry using major and minor axis, asym = 1.05
[Sun Jul 29 16:29:35 2012] Counts = 1649.250000, rescaling region sizes by 2.000000
[Sun Jul 29 16:29:35 2012] XMMSAS src. selection expression = ellipse(27615.928187, 27141.221125, 699.197366, 663.925252, 257.107595, X, Y)
[Sun Jul 29 16:29:35 2012] Writing source region out to fullrun_pn_xmm0033541001_pi300-10000_pass1_cl_src1_src.reg
[Sun Jul 29 16:29:35 2012] Extracting stamp from image fullrun_pn_xmm0033541001_pi300-10000_cl_sm2.00.img.gz, (278, 272) - (358, 353)
[Sun Jul 29 16:29:35 2012] XMMSAS bgd. selection expression = annulus(27615.928187, 27141.221125, 2330.657888, 4661.315776, X, Y) && !ellipse(25026.150140, 31191.355600, 398.497611, 398.497611, 0.000000, X, Y) && !ellipse(26671.210388, 29633.747833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22342.965698, 29365.050903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25774.539400, 25601.385400, 854.208025, 854.208025, 0.000000, X, Y) && !ellipse(22540.314026, 24972.952759, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 29 16:29:35 2012] Writing fullrun_pn_xmm0033541001_pi300-10000_pass1_cl_src1.gif
[Sun Jul 29 16:29:43 2012] Mean detx,y = (130.82, -251.38) 
[Sun Jul 29 16:29:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 29 16:31:03 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 29 16:31:03 2012] Setting source spectrum file to fullrun_pn_xmm0033541001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 29 16:31:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0033541001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jul 29 17:33:57 2012] Updating aperture counts using extracted products
[Sun Jul 29 17:33:57 2012] Error reading totcts from fullrun_pn_xmm0033541001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 29 17:33:58 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 17:33:58 2012] Using photon index=1.80, rate=0.166, arf fullrun_pn_xmm0033541001_pi300-10000_pass1_cl_src1.arf
[Sun Jul 29 17:33:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 17:33:58 2012] Updating source flux to 4.6e-13
[Sun Jul 29 17:34:58 2012] Reading fit data from xmm0033541001/analysis//spectral/fullrun_pn_xmm0033541001_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jul 29 17:34:58 2012] Spectral fit parameter nH value = 1.19828e+19
[Sun Jul 29 17:34:58 2012] Spectral fit parameter PhoIndex value = 2.10057
[Sun Jul 29 17:34:58 2012] Failed to get F(0.3-8.0) from xmm0033541001/analysis//spectral/fullrun_pn_xmm0033541001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jul 29 17:34:58 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 17:34:58 2012] Using Nh = 1.2e+19, photon index=2.10, rate=0.166, arf fullrun_pn_xmm0033541001_pi300-10000_pass1_cl_src1.arf
[Sun Jul 29 17:34:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 17:34:58 2012] Updating source flux to 3.8e-13