[Mon Jun 18 08:09:06 2012] Detection parameters:
  Position = (156.7, 236.9) = 16 32 55.79 37 34 58.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 477.1 +/- 27.2
  Background counts = 12.6
  Rate = 0.06 +/- 0.003

[Mon Jun 18 08:09:07 2012] Off-axis axis estimate = 11.20'
[Mon Jun 18 08:56:20 2012] Using EEF radius (= 12.03 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 08:56:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 18 08:56:20 2012] Initial guess for spatial extent in simple fitting = 12.03"
[Mon Jun 18 08:56:20 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.985
[Mon Jun 18 08:56:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.03"
[Mon Jun 18 09:09:33 2012] fullrun_mos2_xmm0033540901_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 18 09:09:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0033540901_pi300-10000_cl_pass0_src1.csv
[Mon Jun 18 09:09:33 2012] fullrun_mos2_xmm0033540901_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 18 09:09:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0033540901_pi300-10000_cl_pass0_src1.csv
[Mon Jun 18 09:09:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0033540901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0033540901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 09:09:33 2012] fullrun_mos2_xmm0033540901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 18 09:09:33 2012] fullrun_mos2_xmm0033540901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 18 09:09:33 2012] Fit fullrun_mos2_xmm0033540901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jun 18 09:09:43 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.097353 pixels away
[Mon Jun 18 09:09:43 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 09:09:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 09:09:43 2012] Assessing source extent using major
[Mon Jun 18 09:09:43 2012] Source does appear to be extended
[Mon Jun 18 09:09:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 09:54:34 2012] Using EEF radius (= 12.03 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 09:54:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 18 09:54:34 2012] Initial guess for spatial extent in simple fitting = 12.03"
[Mon Jun 18 09:54:34 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.985
[Mon Jun 18 09:54:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.03"
[Mon Jun 18 10:13:40 2012] fullrun_mos2_xmm0033540901_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 18 10:13:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0033540901_pi300-10000_cl_pass1_src1.csv
[Mon Jun 18 10:13:40 2012] fullrun_mos2_xmm0033540901_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 18 10:13:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0033540901_pi300-10000_cl_pass1_src1.csv
[Mon Jun 18 10:13:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0033540901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0033540901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 10:13:40 2012] fullrun_mos2_xmm0033540901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 18 10:13:40 2012] fullrun_mos2_xmm0033540901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 18 10:13:40 2012] Fit fullrun_mos2_xmm0033540901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jun 18 10:13:53 2012] Spatial fit model total counts = 504.997000, observed total counts = 505.000000
[Mon Jun 18 10:13:53 2012] Offset between fit and detection position for source 1 = 0.179460 pixels
[Mon Jun 18 10:13:53 2012] 510.881000 total counts/ 199.867000 bgd. counts: snr = 21.999327
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.179460 pixels
  Position = (156.9, 236.9) = 16 32 55.73 37 34 58.0
  Extent = 6.2 (5.6-7.0)", rotation angle = 0
  Source counts = 311.0 +/- 22.6
  Background counts = 199.9
  Rate = 0.02 +/- 0.001
[Mon Jun 18 10:13:53 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 10:13:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 10:13:53 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 10:13:53 2012] Source does appear to be extended
[Mon Jun 18 10:13:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 11:01:18 2012] XMMSAS src. selection expression = ellipse(13598.383400, 20557.984140, 370.387811, 370.387811, 0.000000, X, Y)
[Mon Jun 18 11:01:18 2012] Writing source region out to fullrun_mos2_xmm0033540901_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun 18 11:01:18 2012] Extracting stamp from image fullrun_mos2_xmm0033540901_pi300-10000_cl_sm2.00.img.gz, (136, 216) - (178, 258)
[Mon Jun 18 11:01:18 2012] XMMSAS bgd. selection expression = annulus(13598.383400, 20557.984140, 617.313018, 1234.626036, X, Y)
[Mon Jun 18 11:01:18 2012] Writing fullrun_mos2_xmm0033540901_pi300-10000_pass1_cl_src1.gif
[Mon Jun 18 11:01:20 2012] Mean detx,y = (-10378.97, -8446.98) 
[Mon Jun 18 11:01:21 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 11:01:28 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 11:01:28 2012] Setting source spectrum file to fullrun_mos2_xmm0033540901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 18 11:01:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0033540901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun 18 11:14:16 2012] Updating aperture counts using extracted products
[Mon Jun 18 11:14:16 2012] Error reading totcts from fullrun_mos2_xmm0033540901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 18 11:14:17 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 11:14:17 2012] Using photon index=1.80, rate=0.0197, arf fullrun_mos2_xmm0033540901_pi300-10000_pass1_cl_src1.arf
[Mon Jun 18 11:14:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 11:14:17 2012] Updating source flux to 5e-13
[Mon Jun 18 11:14:50 2012] Reading fit data from xmm0033540901/analysis//spectral/fullrun_mos2_xmm0033540901_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jun 18 11:14:50 2012] Spectral fit parameter nH value = 1.26633e+19
[Mon Jun 18 11:14:50 2012] Spectral fit parameter PhoIndex value = 2.12432
[Mon Jun 18 11:14:50 2012] Failed to get F(0.3-8.0) from xmm0033540901/analysis//spectral/fullrun_mos2_xmm0033540901_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jun 18 11:14:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 11:14:50 2012] Using Nh = 1.3e+19, photon index=2.12, rate=0.0197, arf fullrun_mos2_xmm0033540901_pi300-10000_pass1_cl_src1.arf
[Mon Jun 18 11:14:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 11:14:50 2012] Updating source flux to 4.4e-13